There are several init code inside em28xx-cards that are actually
part of analog initialization. Move the code to em28x-video, in
order to remove part of the mess.
In thesis, no functional changes so far.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
---
drivers/media/usb/em28xx/em28xx-cards.c | 71 -------------------------
drivers/media/usb/em28xx/em28xx-video.c | 91 ++++++++++++++++++++++++++++++---
2 files changed, 84 insertions(+), 78 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 551cbc294190..175cd776e0a1 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2907,7 +2907,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
struct usb_interface *interface,
int minor)
{
- struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
int retval;
static const char *default_chip_name = "em28xx";
const char *chip_name = default_chip_name;
@@ -3034,15 +3033,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
}
}
- retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
- if (retval < 0) {
- em28xx_errdev("Call to v4l2_device_register() failed!\n");
- return retval;
- }
-
- v4l2_ctrl_handler_init(hdl, 8);
- dev->v4l2_dev.ctrl_handler = hdl;
-
rt_mutex_init(&dev->i2c_bus_lock);
/* register i2c bus 0 */
@@ -3071,72 +3061,14 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
}
}
- /*
- * Default format, used for tvp5150 or saa711x output formats
- */
- dev->vinmode = 0x10;
- dev->vinctl = EM28XX_VINCTRL_INTERLACED |
- EM28XX_VINCTRL_CCIR656_ENABLE;
-
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
- /* Configure audio */
- retval = em28xx_audio_setup(dev);
- if (retval < 0) {
- em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
- __func__, retval);
- goto fail;
- }
- if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
- v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
- V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
- v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
- V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f);
- } else {
- /* install the em28xx notify callback */
- v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE),
- em28xx_ctrl_notify, dev);
- v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME),
- em28xx_ctrl_notify, dev);
- }
-
- /* wake i2c devices */
- em28xx_wake_i2c(dev);
-
- /* init video dma queues */
- INIT_LIST_HEAD(&dev->vidq.active);
- INIT_LIST_HEAD(&dev->vbiq.active);
-
- if (dev->board.has_msp34xx) {
- /* Send a reset to other chips via gpio */
- retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
- if (retval < 0) {
- em28xx_errdev("%s: em28xx_write_reg - "
- "msp34xx(1) failed! error [%d]\n",
- __func__, retval);
- goto fail;
- }
- msleep(3);
-
- retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
- if (retval < 0) {
- em28xx_errdev("%s: em28xx_write_reg - "
- "msp34xx(2) failed! error [%d]\n",
- __func__, retval);
- goto fail;
- }
- msleep(3);
- }
-
retval = em28xx_register_analog_devices(dev);
if (retval < 0) {
goto fail;
}
- /* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
-
return 0;
fail:
@@ -3388,9 +3320,6 @@ static int em28xx_usb_probe(struct usb_interface *interface,
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
- /* initialize videobuf2 stuff */
- em28xx_vb2_setup(dev);
-
/* allocate device struct */
mutex_init(&dev->lock);
mutex_lock(&dev->lock);
diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c
index 8b8a4eb96875..85284626dbd6 100644
--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -2186,10 +2186,78 @@ int em28xx_register_analog_devices(struct em28xx *dev)
u8 val;
int ret;
unsigned int maxw;
+ struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
+
+ if (!dev->is_audio_only) {
+ /* This device does not support the v4l2 extension */
+ return 0;
+ }
printk(KERN_INFO "%s: v4l2 driver version %s\n",
dev->name, EM28XX_VERSION);
+ ret = v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
+ if (ret < 0) {
+ em28xx_errdev("Call to v4l2_device_register() failed!\n");
+ goto err;
+ }
+
+ v4l2_ctrl_handler_init(hdl, 8);
+ dev->v4l2_dev.ctrl_handler = hdl;
+
+ /*
+ * Default format, used for tvp5150 or saa711x output formats
+ */
+ dev->vinmode = 0x10;
+ dev->vinctl = EM28XX_VINCTRL_INTERLACED |
+ EM28XX_VINCTRL_CCIR656_ENABLE;
+
+ /* Configure audio */
+ ret = em28xx_audio_setup(dev);
+ if (ret < 0) {
+ em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
+ __func__, ret);
+ goto err;
+ }
+ if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
+ v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+ v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f);
+ } else {
+ /* install the em28xx notify callback */
+ v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE),
+ em28xx_ctrl_notify, dev);
+ v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME),
+ em28xx_ctrl_notify, dev);
+ }
+
+ /* wake i2c devices */
+ em28xx_wake_i2c(dev);
+
+ /* init video dma queues */
+ INIT_LIST_HEAD(&dev->vidq.active);
+ INIT_LIST_HEAD(&dev->vbiq.active);
+
+ if (dev->board.has_msp34xx) {
+ /* Send a reset to other chips via gpio */
+ ret = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
+ if (ret < 0) {
+ em28xx_errdev("%s: em28xx_write_reg - msp34xx(1) failed! error [%d]\n",
+ __func__, ret);
+ goto err;
+ }
+ msleep(3);
+
+ ret = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
+ if (ret < 0) {
+ em28xx_errdev("%s: em28xx_write_reg - msp34xx(2) failed! error [%d]\n",
+ __func__, ret);
+ goto err;
+ }
+ msleep(3);
+ }
+
/* set default norm */
dev->norm = V4L2_STD_PAL;
v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
@@ -2252,14 +2320,16 @@ int em28xx_register_analog_devices(struct em28xx *dev)
/* Reset image controls */
em28xx_colorlevels_set_default(dev);
v4l2_ctrl_handler_setup(&dev->ctrl_handler);
- if (dev->ctrl_handler.error)
- return dev->ctrl_handler.error;
+ ret = dev->ctrl_handler.error;
+ if (ret)
+ goto err;
/* allocate and fill video video_device struct */
dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
if (!dev->vdev) {
em28xx_errdev("cannot allocate video_device.\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err;
}
dev->vdev->queue = &dev->vb_vidq;
dev->vdev->queue->lock = &dev->vb_queue_lock;
@@ -2289,7 +2359,7 @@ int em28xx_register_analog_devices(struct em28xx *dev)
if (ret) {
em28xx_errdev("unable to register video device (error=%i).\n",
ret);
- return ret;
+ goto err;
}
/* Allocate and fill vbi video_device struct */
@@ -2318,7 +2388,7 @@ int em28xx_register_analog_devices(struct em28xx *dev)
vbi_nr[dev->devno]);
if (ret < 0) {
em28xx_errdev("unable to register vbi device\n");
- return ret;
+ goto err;
}
}
@@ -2327,13 +2397,14 @@ int em28xx_register_analog_devices(struct em28xx *dev)
"radio");
if (!dev->radio_dev) {
em28xx_errdev("cannot allocate video_device.\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err;
}
ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
radio_nr[dev->devno]);
if (ret < 0) {
em28xx_errdev("can't register radio device\n");
- return ret;
+ goto err;
}
em28xx_info("Registered radio device as %s\n",
video_device_node_name(dev->radio_dev));
@@ -2346,5 +2417,11 @@ int em28xx_register_analog_devices(struct em28xx *dev)
em28xx_info("V4L2 VBI device registered as %s\n",
video_device_node_name(dev->vbi_dev));
+ /* Save some power by putting tuner to sleep */
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
+
+ /* initialize videobuf2 stuff */
+ em28xx_vb2_setup(dev);
+err:
return 0;
}
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
