Mauro, Please pull this patch series for 3.14. It's rebased but otherwise unchanged from the last review patch series: http://www.spinics.net/lists/linux-media/msg70819.html Happy New Year! Regards, Hans The following changes since commit 7d459937dc09bb8e448d9985ec4623779427d8a5: [media] Add driver for Samsung S5K5BAF camera sensor (2013-12-21 07:01:36 -0200) are available in the git repository at: git://linuxtv.org/hverkuil/media_tree.git adv for you to fetch changes up to 4644c02f7befe821bdd0d20b33d6a0de7b59cfae: adv7842: add drive strength enum and sync names with adv7604. (2014-01-02 13:44:30 +0100) ---------------------------------------------------------------- Hans Verkuil (6): adv7604: adv7604_s_register clean up. adv7604: initialize timings to CEA 640x480p59.94. adv7842: support YCrCb analog input, receive CEA formats as RGB on VGA input adv7842: set LLC DLL phase from platform_data adv7842: initialize timings to CEA 640x480p59.94. adv7842: add drive strength enum and sync names with adv7604. Martin Bugge (27): ad9389b: whitespace changes to improve readability ad9389b: remove rx-sense irq dependency ad9389b: retry setup if the state is inconsistent adv7511: disable register reset by HPD adv7511: add VIC and audio CTS/N values to log_status adv7511: verify EDID header adv7604: support 1366x768 DMT Reduced Blanking adv7604: set restart_stdi_once flag when signal is lost. adv7604: sync polarities from platform data adv7842: Re-worked query_dv_timings() adv7842: corrected setting of cp-register 0x91 and 0x8f. adv7842: properly enable/disable the irqs. adv7842: save platform data in state struct adv7842: added DE vertical position in SDP-io-sync adv7842: set defaults spa-location. adv7842: 625/525 line standard jitter fix. adv7842: set default input in platform-data adv7842: increase wait time. adv7842: clear edid, if no edid just disable Edid-DDC access adv7842: restart STDI once if format is not found. adv7842: support g_edid ioctl adv7842: i2c dummy clients registration. adv7842: enable HDMI/DVI mode irq adv7842: composite sd-ram test, clear timings before setting. adv7842: obtain free-run mode from the platform_data. adv7842: Composite sync adjustment adv7842: return 0 if no change in s_dv_timings Mats Randgaard (16): ad9389b: verify EDID header adv7604: add support for all the digital input ports adv7604: Receive CEA formats as RGB on VGA (RGB) input adv7604: select YPbPr if RGB_RANGE_FULL/LIMITED is set for VGA_COMP inputs adv7604: set CEC address (SPA) in EDID adv7604: improve EDID handling adv7604: remove connector type. Never used for anything useful. adv7604: return immediately if the new input is equal to what is configured adv7604: remove debouncing of ADV7604_FMT_CHANGE events adv7604: improve HDMI audio handling adv7604: adjust gain and offset for DVI-D signals adv7604: Enable HDMI_MODE interrupt adv7604: return immediately if the new timings are equal to what is configured adv7842: remove connector type. Never used for anything useful adv7842: Use defines to select EDID port adv7842: mute audio before switching inputs to avoid noise/pops Mikhail Khelik (1): adv7604: add hdmi driver strength adjustment arch/blackfin/mach-bf609/boards/ezkit.c | 4 +- drivers/media/i2c/ad9389b.c | 277 +++++++++++++++++++----------------- drivers/media/i2c/adv7511.c | 64 +++++++-- drivers/media/i2c/adv7604.c | 645 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------- drivers/media/i2c/adv7842.c | 646 +++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------- include/media/adv7604.h | 38 +++-- include/media/adv7842.h | 59 ++++++-- 7 files changed, 1135 insertions(+), 598 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
