Re: [ivtv-users] Kernel crash with modprobe cx18

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2013-12-26 at 06:57 -0600, Scott Robinson wrote:
> The machine with which I encountered this problem has two HVR-1600
> cards. I moved one card to another machine. The card still fails at
> the same point. I ran memtest, which passed. The machine has about 3GB
> memory free. I loaded other versions of the kernel. Up to and
> including 3.9.11-200.fc18 work. Starting at 3.10.4-100.fc18 fail. I
> tried a Ubuntu 13.10 (kernel-3.11.0-12-generic) livecd; the machine
> failed at the same point.

OK.  I'll have to find some time to bisect this problem with my own
setup at home.  Having known good and bad versions helps bound where the
problem could be, thanks.

I'm very busy at work until about mid-January, so don't expect much
until then. Bisection iterations take me about 2 hours each, IIRC.

	$ git bisect start v3.10 v3.9

tells me I have 14 steps, so 28 hours, or 3.5 full work days.

  
> I am wondering what changed, starting with the 3.10 series, that may
> cause this problem.

A change to the tuner driver in question; not likely the cx18 driver
itself.

I'll wildly speculate that it might be a driver problem with attempting
to use too much memory from the kernel stack.

It doesn't matter. The Oops is close to useless in finding the cause.
It'll have to be bisected.

>  I also wonder why I haven't seen this problem
> reported before.

Both Conventional (legacy) PCI and Analog TV are about dead; that
probably means a small user base.  


> I looked at modinfo. That's above my skill level. I use the cards to
> record using the analog cable input, the mpeg encoder. What options
> could I use to inhibit everything else?
> 
> I would appreciate any advise as to what else I may check to isolate
> this problem.

I'll say not much at this point; unless you want to start bisecting
kernel source code revisions and compiling, installing, and tetsing
custom kernels.

Regards,
Andy

> Thanks,
> Scott
> 
> 
> On Thu, Dec 19, 2013 at 7:11 PM, Andy Walls <awalls@xxxxxxxxxxxxxxxx> wrote:
> > On Thu, 2013-12-19 at 07:00 -0600, Scott Robinson wrote:
> >> Please see attachment. Many thanks for your response.
> >
> >> On Wed, Dec 18, 2013 at 7:40 PM, Andy Walls <awalls@xxxxxxxxxxxxxxxx> wrote:
> >> > On Wed, 2013-12-18 at 13:06 -0600, Scott Robinson wrote:
> >> >> I am running Fedora 18, x86_64, and recently updated the kernel to
> >> >> 3.11.10-100.fc18 from 3.6.10-4.fc18.
> >> >>
> >> >> When I try to install the cx18 module, the kernel crashes with the following:
> >> >
> >> > Can you provide the output of
> >> >
> >> >         $ objdump -d -l -F /lib/modules/3.11.10-100.fc18.x86_64/kernel/drivers/media/common/tuners/tda8290.ko
> >> >
> >> > for the first few screenfuls of the tda829x_attach function?
> >> >
> >> > I can match that up with the kernel v3.10 source code and see what
> >> > pointer is NULL.
> >
> >> >> [  495.361662] netconsole: network logging started
> >> >> [  558.481787] media: Linux media interface: v0.10
> >> >> [  558.502941] Linux video capture interface: v2.00
> >> >> [  558.617145] cx18:  Start initialization, version 1.5.1
> >> >> [  558.617237] cx18-0: Initializing card 0
> >
> >> >> [  558.725076] cx18-0:  info: activating i2c...
> >> >> [  558.725084] cx18-0:  i2c: i2c init
> >> >> [  558.858738] tveeprom 6-0050: Hauppauge model 74351, rev F1F5, serial# 7764125
> >> >> [  558.858766] tveeprom 6-0050: MAC address is 00:0d:fe:76:78:9d
> >> >> [  558.858790] tveeprom 6-0050: tuner model is NXP 18271C2 (idx 155, type 54)
> >> >> [  558.858801] tveeprom 6-0050: TV standards PAL(B/G) NTSC(M) PAL(I)
> >> >> SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
> >> >> [  558.858817] tveeprom 6-0050: audio processor is CX23418 (idx 38)
> >> >> [  558.858825] tveeprom 6-0050: decoder processor is CX23418 (idx 31)
> >> >> [  558.858839] tveeprom 6-0050: has no radio
> >> >> [  558.858847] cx18-0: Autodetected Hauppauge HVR-1600
> >> >> [  558.858860] cx18-0:  info: Worldwide tuner detected
> >> >> [  558.858882] cx18-0:  info: GPIO initial dir: 0000cffe/0000ffff out:
> >> >> 00003001/00000000
> >> >> [  558.908552] cx18-0: Simultaneous Digital and Analog TV capture supported
> >> >> [  559.075778] tuner 7-0042: Tuner -1 found with type(s) Radio TV.
> >> >> [  559.098598] cs5345 6-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
> >> >> [  559.105203] BUG: unable to handle kernel NULL pointer dereference
> >> >> at 0000000000000202
> >> >> [  559.109526] IP: [<ffffffffa04facae>] tda829x_attach+0x6e/0xba0 [tda8290]
> >> >> [  559.113832] PGD 0
> >> >> [  559.118058] Oops: 0000 [#1] SMP
> >> >> [  559.122219] Modules linked in: cs5345 tda8290 tuner cx18(+)
> >> >> videobuf_vmalloc tveeprom cx2341x videobuf_core dvb_core v4l2_common
> >> >> videodev media netconsole nfsv4 dns_resolver nfs lockd fscache
> >> >> snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq
> >> >> snd_seq_device snd_pcm snd_page_alloc ppdev kvm_amd kvm sp5100_tco
> >> >> snd_timer snd soundcore shpchp parport_pc parport microcode serio_raw
> >> >> edac_core k10temp edac_mce_amd acpi_cpufreq mperf i2c_piix4 uinput
> >> >> ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper pata_atiixp
> >> >> ttm r8169 drm mii i2c_core sunrpc
> >> >> [  559.137276] CPU: 0 PID: 26 Comm: kworker/0:1 Not tainted
> >> >> 3.11.10-100.fc18.x86_64 #1
> >> >> [  559.142306] Hardware name: FOXCONN A6VMX/A6VMX, BIOS 080014  06/03/2009
> >> >> [  559.147406] Workqueue: events work_for_cpu_fn
> >> >> [  559.152497] task: ffff880121ef9e80 ti: ffff8801219a0000 task.ti:
> >> >> ffff8801219a0000
> >> >> [  559.157655] RIP: 0010:[<ffffffffa04facae>]  [<ffffffffa04facae>]
> >> >> tda829x_attach+0x6e/0xba0 [tda8290]
> >> >> [  559.162964] RSP: 0018:ffff8801219a1b68  EFLAGS: 00010202
> >> >> [  559.168238] RAX: ffff88011d3bf060 RBX: ffff88011c734000 RCX: 0000000000000000
> >> >> [  559.173537] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88011d3bf0c0
> >> >> [  559.178905] RBP: ffff8801219a1bf8 R08: 0000000000016f00 R09: ffff880123401a00
> >> >> [  559.184294] R10: ffffffffa04fac87 R11: 0000000000000000 R12: ffff88011d3bf060
> >> >> [  559.189662] R13: 0000000000000202 R14: ffff88012099d698 R15: 0000000000000042
> >> >> [  559.195081] FS:  00007fc9f1c89840(0000) GS:ffff880127c00000(0000)
> >> >> knlGS:0000000000000000
> >> >> [  559.200563] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> >> >> [  559.206034] CR2: 0000000000000202 CR3: 0000000001c0c000 CR4: 00000000000007f0
> >> >> [  559.211611] Stack:
> >> >> [  559.217124]  ffff8801219a1bc8 ffffffff810cc08d ffff88012099d370
> >> >> ffffffffa04f6138
> >> >> [  559.222852]  ffff8801219a0101 ffffffffa04fe060 0000000000000000
> >> >> ffffffffa04fd030
> >> >> [  559.228659]  ffff8801219a1c4c ffffffffa04fd030 0000000000000036
> >> >> 00000000b58d6d22
> >> >> [  559.234345] Call Trace:
> >> >> [  559.239922]  [<ffffffff810cc08d>] ? find_symbol+0x3d/0xb0
> >> >> [  559.245535]  [<ffffffffa04f3605>] set_type+0x325/0x9f0 [tuner]
> >> >> [  559.251177]  [<ffffffffa04c95ca>] ? cx18_i2c_register+0x15a/0x210 [cx18]
> >> >> [  559.256814]  [<ffffffffa04f3d6f>] tuner_s_type_addr+0x9f/0x140 [tuner]
> >> >> [  559.262494]  [<ffffffffa04c8722>] cx18_probe+0xda2/0x1560 [cx18]
> >> >> [  559.268195]  [<ffffffff8133d4ab>] local_pci_probe+0x4b/0x80
> >> >> [  559.273897]  [<ffffffff81080da8>] work_for_cpu_fn+0x18/0x30
> >> >> [  559.279604]  [<ffffffff8108391a>] process_one_work+0x17a/0x400
> >> >> [  559.285341]  [<ffffffff81083bcc>] process_scheduled_works+0x2c/0x40
> >> >> [  559.291056]  [<ffffffff81084ed2>] worker_thread+0x262/0x370
> >> >> [  559.296787]  [<ffffffff81084c70>] ? manage_workers.isra.21+0x2b0/0x2b0
> >> >> [  559.302532]  [<ffffffff8108b3e0>] kthread+0xc0/0xd0
> >> >> [  559.308252]  [<ffffffff81010000>] ? perf_trace_xen_mc_callback+0xe0/0xe0
> >> >> [  559.314017]  [<ffffffff8108b320>] ? kthread_create_on_node+0x120/0x120
> >> >> [  559.319770]  [<ffffffff8167576c>] ret_from_fork+0x7c/0xb0
> >> >> [  559.325544]  [<ffffffff8108b320>] ? kthread_create_on_node+0x120/0x120
> >> >> [  559.331343] Code: c9 a8 c9 e0 48 85 c0 49 89 c4 0f 84 7e 0a 00 00
> >> >> 4d 85 ed 48 89 83 28 03 00 00 44 88 38 4c 89 70 08 48 c7 40 18 87 d4
> >> >> 4f a0 74 12 <41> 8b 45 00 41 89 44 24 38 49 8b 45 08 49 89 44 24 48 4d
> >> >> 8d 74
> >> >> [  559.344343] RIP  [<ffffffffa04facae>] tda829x_attach+0x6e/0xba0 [tda8290]
> >> >> [  559.350561]  RSP <ffff8801219a1b68>
> >> >> [  559.356632] CR2: 0000000000000202
> >> >> [  559.396189] ---[ end trace d9c77bf63cfd8777 ]---
> >
> > OK, this is kind of weird.  The failure point in question is here in
> > drivers/media/tuners/tda8290.c:tda829x_attach():
> >
> >         struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe,
> >                                             struct i2c_adapter *i2c_adap, u8 i2c_addr,
> >                                             struct tda829x_config *cfg)
> >         {
> >                 struct tda8290_priv *priv = NULL;
> >                 char *name;
> >
> >                 priv = kzalloc(sizeof(struct tda8290_priv), GFP_KERNEL);
> >                 if (priv == NULL)
> >                         return NULL;
> >                 fe->analog_demod_priv = priv;
> >
> >                 priv->i2c_props.addr     = i2c_addr;
> >                 priv->i2c_props.adap     = i2c_adap;
> >                 priv->i2c_props.name     = "tda829x";
> >                 if (cfg) {
> >                         priv->cfg.config = cfg->lna_cfg;
> >                         priv->tda18271_std_map = cfg->tda18271_std_map;
> >                 }
> >
> >                 if (tda8290_probe(&priv->i2c_props) == 0) {
> >                         priv->ver = TDA8290;
> >                         memcpy(&fe->ops.analog_ops, &tda8290_ops,   <------- accessing tda8290_ops seems to be it
> >                                sizeof(struct analog_demod_ops));
> >                 }
> >                 [...]
> >
> > The memcpy() gets unrolled by the compiler, and when the processor is
> > copying the first word of the "tda8290_ops" variable, the NULL
> > dereference occurs.
> >
> >              c87:       f6 be d0                test   %rax,%rax ; if (priv == NULL)
> >              c8a:       80 00 00                mov    %rax,%r12
> >              c8d:       41 55 49 89 cd 41       je     1711 <tda829x_release+0x16e1> (File Offset: 0x1751); return NULL;
> >              c93:       54 53 48                test   %r13,%r13 ; if (cfg) {
> >              c96:       89 fb 48 83 ec 68 48    mov    %rax,0x328(%rbx) ; fe->analog_demod_priv = priv;
> >              c9d:       8b 3d 00                mov    %r15b,(%rax) ; priv->i2c_props.addr     = i2c_addr;
> >              ca0:       00 00 00 65             mov    %r14,0x8(%rax) ; priv->i2c_props.adap     = i2c_adap;
> >              ca4:       48 8b 04 25 28 00 00    movq   $0x0,0x18(%rax) ; priv->i2c_props.name     = "tda829x";
> >              cab:       00
> >              cac:       48 89                   je     cc0 <tda829x_release+0xc90> (File Offset: 0xd00)
> >              cae:       45 c8 31 c0             mov    0x0(%r13),%eax ; cfg->lna_cfg
> >              cb2:       e8 00 00 00 00          mov    %eax,0x38(%r12) ; priv->cfg.config = cfg->lna_cfg;
> >              cb7:       48 85 c0 49             mov    0x8(%r13),%rax
> >              cbb:       89 c4 0f 84 7e          mov    %rax,0x48(%r12) ; priv->tda18271_std_map = cfg->tda18271_std_map;
> >              cc0:       0a 00 00 4d 85          lea    0x8(%r12),%r14 ; &priv->i2c_props.adap
> >              cc5:       ed 48 89                mov    %r12,%rdi ; &priv->i2c_props
> >              cc8:       83 28 03                mov    %r14,%rsi ; priv->i2c_props.adap
> >              ccb:       00 00 44 88 38          callq  50 <tda829x_release+0x20> (File Offset: 0x90) ; tda8290_probe();
> >              cd0:       4c 89                   test   %eax,%eax ; if (tda8290_probe(&priv->i2c_props) == 0) {
> >              cd2:       70 08 48 c7 40 18       jne    d5c <tda829x_release+0xd2c> (File Offset: 0xd9c)
> >              cd8:       00 00 00 00 74 12 41    mov    0x0(%rip),%rax        # cdf <tda829x_release+0xcaf> (File Offset: 0xd1f) ; unrolled memcpy(&fe->ops.analog_ops, &tda8290_ops, sizeof(struct analog_demod_ops)); first read
> >              cdf:       8b 45 00 41 89 44       movb   $0x1,0x22(%r12) ; priv->ver = TDA8290;
> >              ce5:       24 38 49 8b 45 08 49    mov    %rax,0x2a8(%rbx) ; first write of unrolled memcpy()
> >              cec:       89 44 24 48 4d 8d 74    mov    0x0(%rip),%rax        # cf3 <tda829x_release+0xcc3> (File Offset: 0xd33) ; second read of unrolled memcpy()
> >              cf3:       24 08 4c 89 e7 4c 89    mov    %rax,0x2b0(%rbx) ; second write of unrolled memcpy();
> >         [...]
> >
> > But that "tda8290_ops" structure should be a constant that doesn't
> > change.  Either you've got a serious memory problem or something is
> > going on that I can't see.
> >
> > The page fault below that follows the initial fault is likely another
> > symptom, but it doesn't help find the real problem.
> >
> > The cx18 driver is a bit of pig when it comes to memory; it grabs a
> > bunch of memory for various streams at module load.
> >
> > You can use the module options to the cx18 driver to inhibit it from
> > allocating memory for streams you don't use and for lower memory grabbed
> > for streams you do use.  See 'modinfo cx18'.
> >
> > Regards,
> > Andy
> >
> >> >> [  559.398420] BUG: unable to handle kernel paging request at ffffffffffffffd8
> >> >> [  559.404868] IP: [<ffffffff8108b6c0>] kthread_data+0x10/0x20
> >> >> [  559.411371] PGD 1c0f067 PUD 1c11067 PMD 0
> >> >> [  559.417676] Oops: 0000 [#2] SMP
> >> >> [  559.423821] Modules linked in: cs5345 tda8290 tuner cx18(+)
> >> >> videobuf_vmalloc tveeprom cx2341x videobuf_core dvb_core v4l2_common
> >> >> videodev media netconsole nfsv4 dns_resolver nfs lockd fscache
> >> >> snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq
> >> >> snd_seq_device snd_pcm snd_page_alloc ppdev kvm_amd kvm sp5100_tco
> >> >> snd_timer snd soundcore shpchp parport_pc parport microcode serio_raw
> >> >> edac_core k10temp edac_mce_amd acpi_cpufreq mperf i2c_piix4 uinput
> >> >> ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper pata_atiixp
> >> >> ttm r8169 drm mii i2c_core sunrpc
> >> >> [  559.444987] CPU: 0 PID: 26 Comm: kworker/0:1 Tainted: G      D
> >> >> 3.11.10-100.fc18.x86_64 #1
> >> >> [  559.452106] Hardware name: FOXCONN A6VMX/A6VMX, BIOS 080014  06/03/2009
> >> >> [  559.459180] task: ffff880121ef9e80 ti: ffff8801219a0000 task.ti:
> >> >> ffff8801219a0000
> >> >> [  559.466267] RIP: 0010:[<ffffffff8108b6c0>]  [<ffffffff8108b6c0>]
> >> >> kthread_data+0x10/0x20
> >> >> [  559.473364] RSP: 0018:ffff8801219a1758  EFLAGS: 00010092
> >> >> [  559.480514] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000f
> >> >> [  559.487469] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880121ef9e80
> >> >> [  559.494212] RBP: ffff8801219a1758 R08: ffff880121ef9ef0 R09: 000000000000005f
> >> >> [  559.500757] R10: 0000000000000001 R11: 0000000000000000 R12: ffff880127c14180
> >> >> [  559.507118] R13: 0000000000000000 R14: 0000000000000001 R15: ffff880121ef9e80
> >> >> [  559.513429] FS:  00007f73ce1a6980(0000) GS:ffff880127c00000(0000)
> >> >> knlGS:0000000000000000
> >> >> [  559.519763] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> >> >> [  559.526047] CR2: 0000000000000028 CR3: 000000011dcc0000 CR4: 00000000000007f0
> >> >> [  559.532331] Stack:
> >> >> [  559.538475]  ffff8801219a1778 ffffffff81085065 ffff8801219a1778
> >> >> ffff880121efa190
> >> >> [  559.544779]  ffff8801219a17e8 ffffffff8166af62 ffff880121ef9e80
> >> >> ffff8801219a1fd8
> >> >> [  559.551125]  ffff8801219a1fd8 ffff8801219a1fd8 ffff8801219a17d8
> >> >> ffff880121ef9e80
> >> >> [  559.557344] Call Trace:
> >> >> [  559.563534]  [<ffffffff81085065>] wq_worker_sleeping+0x15/0xa0
> >> >> [  559.569761]  [<ffffffff8166af62>] __schedule+0x492/0x7a0
> >> >> [  559.575925]  [<ffffffff8166bc99>] schedule+0x29/0x70
> >> >> [  559.582047]  [<ffffffff8106bd12>] do_exit+0x6b2/0xa20
> >> >> [  559.588098]  [<ffffffff8166e0a2>] oops_end+0xa2/0xf0
> >> >> [  559.594098]  [<ffffffff81661fc7>] no_context+0x253/0x27e
> >> >> [  559.600051]  [<ffffffff81318e8a>] ? delay_tsc+0x4a/0x80
> >> >> [  559.605971]  [<ffffffff816621b2>] __bad_area_nosemaphore+0x1c0/0x1df
> >> >> [  559.611958]  [<ffffffff816621e4>] bad_area_nosemaphore+0x13/0x15
> >> >> [  559.617885]  [<ffffffff81670f06>] __do_page_fault+0x3a6/0x4f0
> >> >> [  559.623767]  [<ffffffff8131e460>] ? bsearch+0x60/0x90
> >> >> [  559.629658]  [<ffffffff810cb2e0>] ? mod_find_symname+0x80/0x80
> >> >> [  559.635542]  [<ffffffff810cb469>] ? find_symbol_in_section+0x49/0x120
> >> >> [  559.641411]  [<ffffffff810cb420>] ? section_objs+0x60/0x60
> >> >> [  559.647307]  [<ffffffff810cbc16>] ? each_symbol_section.part.6+0x186/0x1e0
> >> >> [  559.653186]  [<ffffffff8167105e>] do_page_fault+0xe/0x10
> >> >> [  559.659062]  [<ffffffff8166d4d8>] page_fault+0x28/0x30
> >> >> [  559.664950]  [<ffffffffa04fac87>] ? tda829x_attach+0x47/0xba0 [tda8290]
> >> >> [  559.670858]  [<ffffffffa04facae>] ? tda829x_attach+0x6e/0xba0 [tda8290]
> >> >> [  559.676742]  [<ffffffffa04fac87>] ? tda829x_attach+0x47/0xba0 [tda8290]
> >> >> [  559.682581]  [<ffffffff810cc08d>] ? find_symbol+0x3d/0xb0
> >> >> [  559.688381]  [<ffffffffa04f3605>] set_type+0x325/0x9f0 [tuner]
> >> >> [  559.694200]  [<ffffffffa04c95ca>] ? cx18_i2c_register+0x15a/0x210 [cx18]
> >> >> [  559.700050]  [<ffffffffa04f3d6f>] tuner_s_type_addr+0x9f/0x140 [tuner]
> >> >> [  559.705866]  [<ffffffffa04c8722>] cx18_probe+0xda2/0x1560 [cx18]
> >> >> [  559.711697]  [<ffffffff8133d4ab>] local_pci_probe+0x4b/0x80
> >> >> [  559.717304]  [<ffffffff81080da8>] work_for_cpu_fn+0x18/0x30
> >> >> [  559.722660]  [<ffffffff8108391a>] process_one_work+0x17a/0x400
> >> >> [  559.727981]  [<ffffffff81083bcc>] process_scheduled_works+0x2c/0x40
> >> >> [  559.733268]  [<ffffffff81084ed2>] worker_thread+0x262/0x370
> >> >> [  559.738544]  [<ffffffff81084c70>] ? manage_workers.isra.21+0x2b0/0x2b0
> >> >> [  559.743828]  [<ffffffff8108b3e0>] kthread+0xc0/0xd0
> >> >> [  559.749053]  [<ffffffff81010000>] ? perf_trace_xen_mc_callback+0xe0/0xe0
> >> >> [  559.754273]  [<ffffffff8108b320>] ? kthread_create_on_node+0x120/0x120
> >> >> [  559.759536]  [<ffffffff8167576c>] ret_from_fork+0x7c/0xb0
> >> >> [  559.764568]  [<ffffffff8108b320>] ? kthread_create_on_node+0x120/0x120
> >> >> [  559.769386] Code: 00 48 89 e5 5d 48 8b 40 c8 48 c1 e8 02 83 e0 01
> >> >> c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 48 8b 87 b8 02 00 00
> >> >> 55 48 89 e5 <48> 8b 40 d8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66
> >> >> 66 90
> >> >> [  559.779908] RIP  [<ffffffff8108b6c0>] kthread_data+0x10/0x20
> >> >> [  559.784720]  RSP <ffff8801219a1758>
> >> >> [  559.789434] CR2: ffffffffffffffd8
> >> >> [  559.794086] ---[ end trace d9c77bf63cfd8778 ]---
> >> >> [  559.794094] Fixing recursive fault but reboot is needed!
> >> >>
> >> >> Please advise.
> >> >>
> >> >> Scott
> >> >>
> >> >> _______________________________________________
> >> >> ivtv-users mailing list
> >> >> ivtv-users@xxxxxxxxxxxxxx
> >> >> http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> > ivtv-users mailing list
> >> > ivtv-users@xxxxxxxxxxxxxx
> >> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >> _______________________________________________
> >> ivtv-users mailing list
> >> ivtv-users@xxxxxxxxxxxxxx
> >> http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
> >
> >
> > _______________________________________________
> > ivtv-users mailing list
> > ivtv-users@xxxxxxxxxxxxxx
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> 
> _______________________________________________
> ivtv-users mailing list
> ivtv-users@xxxxxxxxxxxxxx
> http://ivtvdriver.org/mailman/listinfo/ivtv-users


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux