Hello, I have a geniatech hdstar device with ubuntu gnome 13.10x64 kernel 3.11 My setup is two sats on disecq switch turksat s42e : lnb1 hellassat s39e : lnb2 I can't scan channels with scan-s2,dvbscan,w_scan,dvbv5-scan sometimes device can lock on transporder but can't get channel information only kaffeine can scan both satellites and can tune channels if I try to scan with scaning tools after that device will be unavailable for tuning need to re-connect I tried three different firmware and tried lastest linux-media source but no lock here is some debug log working log [ 741.740143] ds3000_readreg: read reg 0xd1, value 0x0f [ 741.740361] ds3000_read_status: status = 0x0f [ 714.654175] ds3000_writereg: write reg 0xc4, value 0x05 [ 714.654606] ds3000_writereg: write reg 0xc7, value 0x24 not working log [ 1460.754905] ds3000_readreg: read reg 0xd1, value 0x00 [ 1460.755156] ds3000_read_status: status = 0x00 [ 1460.905801] ds3000_readreg: read reg 0xd1, value 0x00 [ 1460.906047] ds3000_read_status: status = 0x00 [ 1460.954073] ds3000_readreg: read reg 0xd1, value 0x00 [ 1460.954287] ds3000_read_status: status = 0x00 [ 1484.681581] ds3000_writereg: write reg 0x03, value 0x12 [ 1484.682452] ds3000_writereg: write reg 0x03, value 0x02 [ 1484.682658] ds3000_writereg: write reg 0x03, value 0x12 [ 1484.683563] ds3000_writereg: write reg 0x03, value 0x02 [ 1802.083839] ds3000_readreg: read reg 0xa2, value 0x86 [ 1802.083839] ds3000_writereg: write reg 0xa2, value 0x84 [ 1802.099360] ds3000_send_diseqc_msg(0xe0, 0x10, 0x38, 0xf2ds3000_readreg: read reg 0xa2, value 0x84 [ 1802.099937] ds3000_writereg: write reg 0xa2, value 0x04 [ 1802.100375] ds3000_writereg: write reg 0xa3, value 0xe0 thanks -- Olcay K. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
