Ignore this, I'll post a new pull request in a moment. The last patch was broken
due to a mistake on my side.
Regards,
Hans
On 12/20/2013 12:49 PM, Hans Verkuil wrote:
> Hi Mauro,
>
> This empties my list of pending patches.
>
> I will do one other pull request today (to move the omap2 and sn9c102 to staging)
> and another in one week for the adv patches, assuming there will be no comments.
>
> Regards,
>
> Hans
>
> The following changes since commit d22d32e117c19efa1761d871d9dab5e294b7b77d:
>
> [media] Add USB IDs for Winfast DTV Dongle Mini-D (2013-12-19 09:26:15 -0200)
>
> are available in the git repository at:
>
> git://linuxtv.org/hverkuil/media_tree.git for-v3.14b
>
> for you to fetch changes up to 72631040c65e0b00c02788ff012a697faa1e86ef:
>
> videodev2: Set vb2_rect's width and height as unsigned (2013-12-20 11:45:07 +0100)
>
> ----------------------------------------------------------------
> Antonio Ospite (2):
> Documentation/DocBook/media/v4l/subdev-formats.xml: fix a typo
> Documentation/DocBook/media/v4l: fix typo, s/packet/packed/
>
> Archit Taneja (8):
> v4l: ti-vpe: create a scaler block library
> v4l: ti-vpe: support loading of scaler coefficients
> v4l: ti-vpe: make vpe driver load scaler coefficients
> v4l: ti-vpe: enable basic scaler support
> v4l: ti-vpe: create a color space converter block library
> v4l: ti-vpe: Add helper to perform color conversion
> v4l: ti-vpe: enable CSC support for VPE
> v4l: ti-vpe: Add a type specifier to describe vpdma data format type
>
> Fengguang Wu (2):
> fix coccinelle warnings
> fix coccinelle warnings
>
> Hans Verkuil (25):
> v4l2: move tracepoints to video_usercopy
> vb2: push the mmap semaphore down to __buf_prepare()
> vb2: simplify qbuf/prepare_buf by removing callback.
> vb2: fix race condition between REQBUFS and QBUF/PREPARE_BUF.
> vb2: remove the 'fileio = NULL' hack.
> vb2: retry start_streaming in case of insufficient buffers.
> vb2: don't set index, don't start streaming for write()
> vb2: return ENOBUFS in start_streaming in case of too few buffers.
> vb2: Improve file I/O emulation to handle buffers in any order
> DocBook: drop the word 'only'.
> saa7134: move the queue data from saa7134_fh to saa7134_dev.
> saa7134: convert to the control framework.
> saa7134: cleanup radio/video/empress ioctl handling
> saa7134: remove dev from saa7134_fh, use saa7134_fh for empress node
> saa7134: share resource management between normal and empress nodes.
> saa7134: add support for control events.
> saa7134: use V4L2_IN_ST_NO_SIGNAL instead of NO_SYNC
> saa6752hs: drop compat control code.
> saa6752hs: move to media/i2c
> saa6752hs.h: drop empty header.
> saa7134: drop log_status for radio.
> saa6588: after calling CMD_CLOSE, CMD_POLL is broken.
> saa6588: remove unused CMD_OPEN.
> saa6588: add support for non-blocking mode.
> saa7134: don't set vfd->debug.
>
> Joe Perches (1):
> media: Remove OOM message after input_allocate_device
>
> Matthias Schwarzott (2):
> cx231xx: Add missing selects for MEDIA_SUBDRV_AUTOSELECT
> cx231xx: fix i2c debug prints
>
> Ricardo Ribalda (1):
> videodev2: Set vb2_rect's width and height as unsigned
>
> Wei Yongjun (1):
> radio-bcm2048: fix missing unlock on error in bcm2048_rds_fifo_receive()
>
> Documentation/DocBook/media/v4l/subdev-formats.xml | 6 +-
> Documentation/DocBook/media/v4l/vidioc-streamon.xml | 2 +-
> drivers/media/i2c/Kconfig | 12 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/mt9v032.c | 38 +-
> drivers/media/i2c/saa6588.c | 50 +--
> drivers/media/{pci/saa7134 => i2c}/saa6752hs.c | 19 +-
> drivers/media/pci/bt8xx/bttv-driver.c | 4 +-
> drivers/media/pci/saa7134/Kconfig | 1 +
> drivers/media/pci/saa7134/Makefile | 2 +-
> drivers/media/pci/saa7134/saa7134-core.c | 11 +-
> drivers/media/pci/saa7134/saa7134-empress.c | 359 +++++-------------
> drivers/media/pci/saa7134/saa7134-vbi.c | 11 +-
> drivers/media/pci/saa7134/saa7134-video.c | 777 +++++++++++++++------------------------
> drivers/media/pci/saa7134/saa7134.h | 66 +++-
> drivers/media/platform/davinci/vpbe_display.c | 2 +-
> drivers/media/platform/davinci/vpif_capture.c | 2 +-
> drivers/media/platform/davinci/vpif_display.c | 2 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 2 +-
> drivers/media/platform/s5p-tv/mixer_video.c | 2 +-
> drivers/media/platform/soc_camera/mx2_camera.c | 2 +-
> drivers/media/platform/ti-vpe/Makefile | 2 +-
> drivers/media/platform/ti-vpe/csc.c | 196 ++++++++++
> drivers/media/platform/ti-vpe/csc.h | 68 ++++
> drivers/media/platform/ti-vpe/sc.c | 311 ++++++++++++++++
> drivers/media/platform/ti-vpe/sc.h | 208 +++++++++++
> drivers/media/platform/ti-vpe/sc_coeff.h | 1342 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/media/platform/ti-vpe/vpdma.c | 36 +-
> drivers/media/platform/ti-vpe/vpdma.h | 7 +
> drivers/media/platform/ti-vpe/vpe.c | 251 ++++++++-----
> drivers/media/platform/ti-vpe/vpe_regs.h | 187 ----------
> drivers/media/rc/imon.c | 8 +-
> drivers/media/usb/cx231xx/Kconfig | 2 +
> drivers/media/usb/cx231xx/cx231xx-i2c.c | 16 +-
> drivers/media/usb/em28xx/em28xx-input.c | 4 +-
> drivers/media/usb/pwc/pwc-if.c | 1 -
> drivers/media/v4l2-core/v4l2-dev.c | 9 -
> drivers/media/v4l2-core/v4l2-ioctl.c | 9 +
> drivers/media/v4l2-core/videobuf2-core.c | 452 ++++++++++++-----------
> drivers/staging/media/bcm2048/radio-bcm2048.c | 11 +-
> drivers/staging/media/davinci_vpfe/vpfe_video.c | 2 +
> include/media/saa6588.h | 2 +-
> include/media/saa6752hs.h | 26 --
> include/media/videobuf2-core.h | 17 +-
> include/uapi/linux/v4l2-controls.h | 4 +
> 45 files changed, 3153 insertions(+), 1389 deletions(-)
> rename drivers/media/{pci/saa7134 => i2c}/saa6752hs.c (98%)
> create mode 100644 drivers/media/platform/ti-vpe/csc.c
> create mode 100644 drivers/media/platform/ti-vpe/csc.h
> create mode 100644 drivers/media/platform/ti-vpe/sc.c
> create mode 100644 drivers/media/platform/ti-vpe/sc.h
> create mode 100644 drivers/media/platform/ti-vpe/sc_coeff.h
> delete mode 100644 include/media/saa6752hs.h
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
