On 5 December 2013 22:17, Sean Young <sean@xxxxxxxx> wrote: > On Thu, Dec 05, 2013 at 10:05:45PM +0530, Rajil Saraswat wrote: >> On 5 December 2013 18:54, Sean Young <sean@xxxxxxxx> wrote: >> >> > I really don't know why that would happen. If I understand it correctly >> > this is an error that is returned by the usb host controller driver. >> > >> > Could you set CONFIG_USB_DEBUG and see if you get more information? >> > >> > >> > Sean >> >> The usbmon log with CONFIG_USB_DEBUG set is attached. > > You should have more output in dmesg. Do you? > > > Sean Indeed i did. It is attached.
[ 463.882860] hub 3-0:1.0: state 7 ports 14 chg 0000 evt 1000 [ 463.882894] hub 3-0:1.0: port 12, status 0101, change 0001, 12 Mb/s [ 463.986868] hub 3-0:1.0: debounce: port 12: total 100ms stable 100ms status 0x101 [ 464.037909] hub 3-0:1.0: port 12 not reset yet, waiting 50ms [ 464.139879] usb 3-12: new full-speed USB device number 8 using xhci_hcd [ 464.151041] usb 3-12: ep0 maxpacket = 16 [ 464.151068] usb 3-12: Successful evaluate context command [ 464.151919] usb 3-12: default language 0x0409 [ 464.152776] usb 3-12: udev 8, busnum 3, minor = 263 [ 464.152782] usb 3-12: New USB device found, idVendor=0609, idProduct=031d [ 464.152797] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 464.152801] usb 3-12: Product: eHome Infrared Transceiver [ 464.152805] usb 3-12: Manufacturer: SMK [ 464.152809] usb 3-12: SerialNumber: SM007r3e [ 464.152965] usb 3-12: usb_probe_device [ 464.152971] usb 3-12: configuration #1 chosen from 1 choice [ 464.153188] usb 3-12: Successful Endpoint Configure command [ 464.153324] usb 3-12: adding 3-12:1.0 (config #1, interface 0) [ 464.153376] mceusb 3-12:1.0: usb_probe_interface [ 464.153380] mceusb 3-12:1.0: usb_probe_interface - got id [ 464.153384] mceusb 3-12:1.0: mceusb_dev_probe called [ 464.153388] mceusb 3-12:1.0: acceptable outbound endpoint found [ 464.153391] mceusb 3-12:1.0: acceptable inbound endpoint found [ 464.154056] Registered IR keymap rc-rc6-mce [ 464.154173] input: Media Center Ed. eHome Infrared Remote Transceiver (0609:031d) as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/rc/rc4/input24 [ 464.154273] rc4: Media Center Ed. eHome Infrared Remote Transceiver (0609:031d) as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/rc/rc4 [ 464.154437] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input25 [ 464.154625] rc rc4: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 1 [ 464.154630] mceusb 3-12:1.0: Flushing receive buffers [ 464.154634] mceusb 3-12:1.0: receive request called (size=0x10) [ 464.154640] xhci_queue_intr_tx: 2 callbacks suppressed [ 464.154645] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.154650] mceusb 3-12:1.0: receive request complete (res=0) [ 464.154655] mceusb 3-12:1.0: receive request called (size=0x2) [ 464.154661] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.154665] mceusb 3-12:1.0: receive request complete (res=0) [ 464.154695] mceusb 3-12:1.0: setup answer received 0 bytes [ 464.154699] mceusb 3-12:1.0: Error: urb status = -71 [ 464.164836] mceusb 3-12:1.0: receive request called (size=0x3) [ 464.164849] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.164856] mceusb 3-12:1.0: receive request complete (res=0) [ 464.175844] mceusb 3-12:1.0: receive request called (size=0x2) [ 464.175857] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.175864] mceusb 3-12:1.0: receive request complete (res=0) [ 464.186845] mceusb 3-12:1.0: receive request called (size=0x2) [ 464.186858] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.186865] mceusb 3-12:1.0: receive request complete (res=0) [ 464.197822] mceusb 3-12:1.0: receive request called (size=0x2) [ 464.197826] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.197828] mceusb 3-12:1.0: receive request complete (res=0) [ 464.208839] mceusb 3-12:1.0: receive request called (size=0x2) [ 464.208854] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.208861] mceusb 3-12:1.0: receive request complete (res=0) [ 464.219853] mceusb 3-12:1.0: receive request called (size=0x2) [ 464.219867] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.219874] mceusb 3-12:1.0: receive request complete (res=0) [ 464.230848] mceusb 3-12:1.0: receive request called (size=0x2) [ 464.230862] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.230868] mceusb 3-12:1.0: receive request complete (res=0) [ 464.241846] mceusb 3-12:1.0: receive request called (size=0x2) [ 464.241860] usb 3-12: Driver uses different interval (8 microframes) than xHCI (1 microframe) [ 464.241866] mceusb 3-12:1.0: receive request complete (res=0) [ 464.252844] mceusb 3-12:1.0: receive request called (size=0x3) [ 464.252857] mceusb 3-12:1.0: receive request complete (res=0) [ 464.263830] mceusb 3-12:1.0: receive request called (size=0x3) [ 464.263845] mceusb 3-12:1.0: receive request complete (res=0) [ 464.274850] mceusb 3-12:1.0: Registered SMK eHome Infrared Transceiver with mce emulator interface version 1 [ 464.274859] mceusb 3-12:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)
