This adds ADV7611/ADV7612 Xpressview HDMI Receiver base
support. Only one HDMI port is supported on ADV7612.
The code is based on the ADV7604 driver, and ADV7612 patch by
Shinobu Uehara <shinobu.uehara.xc@xxxxxxxxxxx>
Changes in version 2:
* Used platform data for I2C addresses setup. The driver
should work with both SoC and non-SoC camera models.
* Dropped unnecessary code and unsupported callbacks.
* Implemented IRQ handling for format change detection.
Signed-off-by: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>
---
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/adv761x.c | 1009 +++++++++++++++++++++++++++++++++++++++++++
include/media/adv761x.h | 38 ++
4 files changed, 1059 insertions(+)
create mode 100644 drivers/media/i2c/adv761x.c
create mode 100644 include/media/adv761x.h
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 75c8a03..2388642 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -206,6 +206,17 @@ config VIDEO_ADV7604
To compile this driver as a module, choose M here: the
module will be called adv7604.
+config VIDEO_ADV761X
+ tristate "Analog Devices ADV761X decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Analog Devices ADV7611/ADV7612 video decoder.
+
+ This is an Analog Devices Xpressview HDMI Receiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv761x.
+
config VIDEO_ADV7842
tristate "Analog Devices ADV7842 decoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index e03f177..d78d627 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o
obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o
obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o
obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o
+obj-$(CONFIG_VIDEO_ADV761X) += adv761x.o
obj-$(CONFIG_VIDEO_ADV7842) += adv7842.o
obj-$(CONFIG_VIDEO_AD9389B) += ad9389b.o
obj-$(CONFIG_VIDEO_ADV7511) += adv7511.o
diff --git a/drivers/media/i2c/adv761x.c b/drivers/media/i2c/adv761x.c
new file mode 100644
index 0000000..95939f5
--- /dev/null
+++ b/drivers/media/i2c/adv761x.c
@@ -0,0 +1,1009 @@
+/*
+ * adv761x Analog Devices ADV761X HDMI receiver driver
+ *
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/adv761x.h>
+#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+
+#define ADV761X_DRIVER_NAME "adv761x"
+
+/* VERT_FILTER_LOCKED and DE_REGEN_FILTER_LOCKED flags */
+#define ADV761X_HDMI_F_LOCKED(v) (((v) & 0xa0) == 0xa0)
+
+/* Maximum supported resolution */
+#define ADV761X_MAX_WIDTH 1920
+#define ADV761X_MAX_HEIGHT 1080
+
+/* Use SoC camera subdev desc private data for platform_data */
+#define ADV761X_SOC_CAM_QUIRK 0x1
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+struct adv761x_color_format {
+ enum v4l2_mbus_pixelcode code;
+ enum v4l2_colorspace colorspace;
+};
+
+/* Supported color format list */
+static const struct adv761x_color_format adv761x_cfmts[] = {
+ {
+ .code = V4L2_MBUS_FMT_RGB888_1X24,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ },
+};
+
+/* ADV761X descriptor structure */
+struct adv761x_state {
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct v4l2_ctrl_handler ctrl_hdl;
+
+ u8 edid[256];
+ unsigned edid_blocks;
+
+ struct rw_semaphore rwsem;
+ const struct adv761x_color_format *cfmt;
+ u32 width;
+ u32 height;
+ enum v4l2_field scanmode;
+ u32 status;
+
+ int gpio;
+ int irq;
+
+ struct workqueue_struct *work_queue;
+ struct delayed_work enable_hotplug;
+ struct work_struct interrupt_service;
+
+ struct i2c_client *i2c_cec;
+ struct i2c_client *i2c_inf;
+ struct i2c_client *i2c_dpll;
+ struct i2c_client *i2c_rep;
+ struct i2c_client *i2c_edid;
+ struct i2c_client *i2c_hdmi;
+ struct i2c_client *i2c_cp;
+};
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct adv761x_state, ctrl_hdl)->sd;
+}
+
+static inline struct adv761x_state *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct adv761x_state, sd);
+}
+
+/* I2C I/O operations */
+static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command)
+{
+ s32 ret, i;
+
+ for (i = 0; i < 3; i++) {
+ ret = i2c_smbus_read_byte_data(client, command);
+ if (ret >= 0)
+ return ret;
+ }
+
+ v4l_err(client, "Reading addr:%02x reg:%02x\n failed",
+ client->addr, command);
+ return ret;
+}
+
+static s32 adv_smbus_write_byte_data(struct i2c_client *client, u8 command,
+ u8 value)
+{
+ s32 ret, i;
+
+ for (i = 0; i < 3; i++) {
+ ret = i2c_smbus_write_byte_data(client, command, value);
+ if (!ret)
+ return 0;
+ }
+
+ v4l_err(client, "Writing addr:%02x reg:%02x val:%02x failed\n",
+ client->addr, command, value);
+ return ret;
+}
+
+static s32 adv_smbus_write_i2c_block_data(struct i2c_client *client, u8 command,
+ u8 length, const u8 *values)
+{
+ s32 ret, i;
+
+ ret = i2c_smbus_write_i2c_block_data(client, command, length, values);
+ if (!ret)
+ return 0;
+
+ for (i = 0; i < length; i++) {
+ ret = adv_smbus_write_byte_data(client, command + i, values[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static inline int io_read(struct v4l2_subdev *sd, u8 reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return adv_smbus_read_byte_data(client, reg);
+}
+
+static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return adv_smbus_write_byte_data(client, reg, val);
+}
+
+static inline int cec_read(struct v4l2_subdev *sd, u8 reg)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_read_byte_data(state->i2c_cec, reg);
+}
+
+static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_write_byte_data(state->i2c_cec, reg, val);
+}
+
+static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_read_byte_data(state->i2c_inf, reg);
+}
+
+static inline int infoframe_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_write_byte_data(state->i2c_inf, reg, val);
+}
+
+static inline int dpll_read(struct v4l2_subdev *sd, u8 reg)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_read_byte_data(state->i2c_dpll, reg);
+}
+
+static inline int dpll_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_write_byte_data(state->i2c_dpll, reg, val);
+}
+
+static inline int rep_read(struct v4l2_subdev *sd, u8 reg)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_read_byte_data(state->i2c_rep, reg);
+}
+
+static inline int rep_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_write_byte_data(state->i2c_rep, reg, val);
+}
+
+static inline int edid_read(struct v4l2_subdev *sd, u8 reg)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_read_byte_data(state->i2c_edid, reg);
+}
+
+static inline int edid_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_write_byte_data(state->i2c_edid, reg, val);
+}
+
+static inline int edid_write_block(struct v4l2_subdev *sd,
+ unsigned len, const u8 *val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct adv761x_state *state = to_state(sd);
+ int ret = 0;
+ int i;
+
+ v4l2_dbg(2, debug, sd, "Writing EDID block (%d bytes)\n", len);
+
+ v4l2_subdev_notify(sd, ADV761X_HOTPLUG, (void *)0);
+
+ /* Disable I2C access to internal EDID ram from DDC port */
+ rep_write(sd, 0x74, 0x0);
+
+ for (i = 0; !ret && i < len; i += I2C_SMBUS_BLOCK_MAX)
+ ret = adv_smbus_write_i2c_block_data(state->i2c_edid, i,
+ I2C_SMBUS_BLOCK_MAX, val + i);
+ if (ret)
+ return ret;
+
+ /*
+ * ADV761x calculates the checksums and enables I2C access
+ * to internal EDID ram from DDC port.
+ */
+ rep_write(sd, 0x74, 0x01);
+
+ for (i = 0; i < 1000; i++) {
+ if (rep_read(sd, 0x76) & 0x1) {
+ /* Enable hotplug after 100 ms */
+ queue_delayed_work(state->work_queue,
+ &state->enable_hotplug, HZ / 10);
+ return 0;
+ }
+ schedule();
+ }
+
+ v4l_err(client, "Enabling EDID failed\n");
+ return -EIO;
+}
+
+static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_read_byte_data(state->i2c_hdmi, reg);
+}
+
+static inline int hdmi_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_write_byte_data(state->i2c_hdmi, reg, val);
+}
+
+static inline int cp_read(struct v4l2_subdev *sd, u8 reg)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_read_byte_data(state->i2c_cp, reg);
+}
+
+static inline int cp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ return adv_smbus_write_byte_data(state->i2c_cp, reg, val);
+}
+
+static inline int adv761x_power_off(struct v4l2_subdev *sd)
+{
+ return io_write(sd, 0x0c, 0x62);
+}
+
+static int adv761x_core_init(struct v4l2_subdev *sd)
+{
+ io_write(sd, 0x01, 0x06); /* V-FREQ = 60Hz */
+ /* Prim_Mode = HDMI-GR */
+ io_write(sd, 0x02, 0xf2); /* Auto CSC, RGB out */
+ /* Disable op_656 bit */
+ io_write(sd, 0x03, 0x42); /* 36 bit SDR 444 Mode 0 */
+ io_write(sd, 0x05, 0x28); /* AV Codes Off */
+ io_write(sd, 0x0b, 0x44); /* Power up part */
+ io_write(sd, 0x0c, 0x42); /* Power up part */
+ io_write(sd, 0x14, 0x7f); /* Max Drive Strength */
+ io_write(sd, 0x15, 0x80); /* Disable Tristate of Pins */
+ /* (Audio output pins active) */
+ io_write(sd, 0x19, 0x83); /* LLC DLL phase */
+ io_write(sd, 0x33, 0x40); /* LLC DLL enable */
+
+ cp_write(sd, 0xba, 0x01); /* Set HDMI FreeRun */
+ cp_write(sd, 0x3e, 0x80); /* Enable color adjustments */
+
+ hdmi_write(sd, 0x9b, 0x03); /* ADI recommended setting */
+ hdmi_write(sd, 0x00, 0x08); /* Set HDMI Input Port A */
+ /* (BG_MEAS_PORT_SEL = 001b) */
+ hdmi_write(sd, 0x02, 0x03); /* Enable Ports A & B in */
+ /* background mode */
+ hdmi_write(sd, 0x6d, 0x80); /* Enable TDM mode */
+ hdmi_write(sd, 0x03, 0x18); /* I2C mode 24 bits */
+ hdmi_write(sd, 0x83, 0xfc); /* Enable clock terminators */
+ /* for port A & B */
+ hdmi_write(sd, 0x6f, 0x0c); /* ADI recommended setting */
+ hdmi_write(sd, 0x85, 0x1f); /* ADI recommended setting */
+ hdmi_write(sd, 0x87, 0x70); /* ADI recommended setting */
+ hdmi_write(sd, 0x8d, 0x04); /* LFG Port A */
+ hdmi_write(sd, 0x8e, 0x1e); /* HFG Port A */
+ hdmi_write(sd, 0x1a, 0x8a); /* unmute audio */
+ hdmi_write(sd, 0x57, 0xda); /* ADI recommended setting */
+ hdmi_write(sd, 0x58, 0x01); /* ADI recommended setting */
+ hdmi_write(sd, 0x75, 0x10); /* DDC drive strength */
+ hdmi_write(sd, 0x90, 0x04); /* LFG Port B */
+ hdmi_write(sd, 0x91, 0x1e); /* HFG Port B */
+ hdmi_write(sd, 0x04, 0x03);
+ hdmi_write(sd, 0x14, 0x00);
+ hdmi_write(sd, 0x15, 0x00);
+ hdmi_write(sd, 0x16, 0x00);
+
+ rep_write(sd, 0x40, 0x81); /* Disable HDCP 1.1 features */
+ rep_write(sd, 0x74, 0x00); /* Disable the Internal EDID */
+ /* for all ports */
+
+ /* Setup interrupts */
+ io_write(sd, 0x40, 0xc2); /* Active high until cleared */
+ io_write(sd, 0x6e, 0x03); /* INT1 HDMI DE_REGEN and V_LOCK */
+
+ return v4l2_ctrl_handler_setup(sd->ctrl_handler);
+}
+
+static int adv761x_hdmi_info(struct v4l2_subdev *sd, enum v4l2_field *scanmode,
+ u32 *width, u32 *height)
+{
+ int msb, val;
+
+ /* Line width */
+ msb = hdmi_read(sd, 0x07);
+ if (msb < 0)
+ return msb;
+
+ if (!ADV761X_HDMI_F_LOCKED(msb))
+ return -EAGAIN;
+
+ /* Interlaced or progressive */
+ val = hdmi_read(sd, 0x0b);
+ if (val < 0)
+ return val;
+
+ *scanmode = (val & 0x20) ? V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE;
+ val = hdmi_read(sd, 0x08);
+ if (val < 0)
+ return val;
+
+ val |= (msb & 0x1f) << 8;
+ *width = val;
+
+ /* Lines per frame */
+ msb = hdmi_read(sd, 0x09);
+ if (msb < 0)
+ return msb;
+
+ val = hdmi_read(sd, 0x0a);
+ if (val < 0)
+ return val;
+
+ val |= (msb & 0x1f) << 8;
+ if (*scanmode == V4L2_FIELD_INTERLACED)
+ val <<= 1;
+ *height = val;
+
+ if (*width == 0 || *height == 0)
+ return -EIO;
+
+ return 0;
+}
+
+/* Hotplug work */
+static void adv761x_enable_hotplug(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct adv761x_state *state = container_of(dwork, struct adv761x_state,
+ enable_hotplug);
+ struct v4l2_subdev *sd = &state->sd;
+
+ v4l2_dbg(2, debug, sd, "Enable hotplug\n");
+ v4l2_subdev_notify(sd, ADV761X_HOTPLUG, (void *)1);
+}
+
+/* IRQ work */
+static void adv761x_interrupt_service(struct work_struct *work)
+{
+ struct adv761x_state *state = container_of(work, struct adv761x_state,
+ interrupt_service);
+ struct v4l2_subdev *sd = &state->sd;
+ enum v4l2_field scanmode;
+ u32 width, height;
+ u32 status = 0;
+ int ret;
+
+ /* Clear HDMI interrupts */
+ io_write(sd, 0x6c, 0xff);
+
+ ret = adv761x_hdmi_info(sd, &scanmode, &width, &height);
+ if (ret) {
+ if (state->status == V4L2_IN_ST_NO_SIGNAL)
+ return;
+
+ width = ADV761X_MAX_WIDTH;
+ height = ADV761X_MAX_HEIGHT;
+ scanmode = V4L2_FIELD_NONE;
+ status = V4L2_IN_ST_NO_SIGNAL;
+ }
+
+ if (status)
+ v4l2_dbg(2, debug, sd, "No HDMI video input detected\n");
+ else
+ v4l2_dbg(2, debug, sd, "HDMI video input detected (%ux%u%c)\n",
+ width, height,
+ scanmode == V4L2_FIELD_NONE ? 'p' : 'i');
+
+ down_write(&state->rwsem);
+ state->width = width;
+ state->height = height;
+ state->scanmode = scanmode;
+ state->status = status;
+ up_write(&state->rwsem);
+
+ v4l2_subdev_notify(sd, ADV761X_FMT_CHANGE, NULL);
+}
+
+/* IRQ handler */
+static irqreturn_t adv761x_irq_handler(int irq, void *devid)
+{
+ struct adv761x_state *state = devid;
+
+ queue_work(state->work_queue, &state->interrupt_service);
+ return IRQ_HANDLED;
+}
+
+/* v4l2_subdev_core_ops */
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static void adv761x_inv_register(struct v4l2_subdev *sd)
+{
+ v4l2_info(sd, "0x000-0x0ff: IO Map\n");
+ v4l2_info(sd, "0x100-0x1ff: CEC Map\n");
+ v4l2_info(sd, "0x200-0x2ff: InfoFrame Map\n");
+ v4l2_info(sd, "0x300-0x3ff: DPLL Map\n");
+ v4l2_info(sd, "0x400-0x4ff: Repeater Map\n");
+ v4l2_info(sd, "0x500-0x5ff: EDID Map\n");
+ v4l2_info(sd, "0x600-0x6ff: HDMI Map\n");
+ v4l2_info(sd, "0x700-0x7ff: CP Map\n");
+}
+
+static int adv761x_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ reg->size = 1;
+ switch (reg->reg >> 8) {
+ case 0:
+ reg->val = io_read(sd, reg->reg & 0xff);
+ break;
+ case 1:
+ reg->val = cec_read(sd, reg->reg & 0xff);
+ break;
+ case 2:
+ reg->val = infoframe_read(sd, reg->reg & 0xff);
+ break;
+ case 3:
+ reg->val = dpll_read(sd, reg->reg & 0xff);
+ break;
+ case 4:
+ reg->val = rep_read(sd, reg->reg & 0xff);
+ break;
+ case 5:
+ reg->val = edid_read(sd, reg->reg & 0xff);
+ break;
+ case 6:
+ reg->val = hdmi_read(sd, reg->reg & 0xff);
+ break;
+ case 7:
+ reg->val = cp_read(sd, reg->reg & 0xff);
+ break;
+ default:
+ v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
+ adv761x_inv_register(sd);
+ break;
+ }
+ return 0;
+}
+
+static int adv761x_s_register(struct v4l2_subdev *sd,
+ const struct v4l2_dbg_register *reg)
+{
+ switch (reg->reg >> 8) {
+ case 0:
+ io_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ case 1:
+ cec_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ case 2:
+ infoframe_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ case 3:
+ dpll_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ case 4:
+ rep_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ case 5:
+ edid_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ case 6:
+ hdmi_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ case 7:
+ cp_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ default:
+ v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
+ adv761x_inv_register(sd);
+ break;
+ }
+ return 0;
+}
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
+
+/* v4l2_subdev_video_ops */
+static int adv761x_g_input_status(struct v4l2_subdev *sd, u32 *status)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ down_read(&state->rwsem);
+ *status = state->status;
+ up_read(&state->rwsem);
+ return 0;
+}
+
+static int adv761x_g_mbus_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *mf)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ down_read(&state->rwsem);
+ mf->width = state->width;
+ mf->height = state->height;
+ mf->field = state->scanmode;
+ mf->code = state->cfmt->code;
+ mf->colorspace = state->cfmt->colorspace;
+ up_read(&state->rwsem);
+ return 0;
+}
+
+static int adv761x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index,
+ enum v4l2_mbus_pixelcode *code)
+{
+ /* Check requested format index is within range */
+ if (index >= ARRAY_SIZE(adv761x_cfmts))
+ return -EINVAL;
+
+ *code = adv761x_cfmts[index].code;
+
+ return 0;
+}
+
+static int adv761x_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+
+ return 0;
+}
+
+/* v4l2_subdev_pad_ops */
+static int adv761x_get_edid(struct v4l2_subdev *sd,
+ struct v4l2_subdev_edid *edid)
+{
+ struct adv761x_state *state = to_state(sd);
+
+ if (edid->pad != 0)
+ return -EINVAL;
+
+ if (edid->blocks == 0)
+ return -EINVAL;
+
+ if (edid->start_block >= state->edid_blocks)
+ return -EINVAL;
+
+ if (edid->start_block + edid->blocks > state->edid_blocks)
+ edid->blocks = state->edid_blocks - edid->start_block;
+ if (!edid->edid)
+ return -EINVAL;
+
+ memcpy(edid->edid + edid->start_block * 128,
+ state->edid + edid->start_block * 128,
+ edid->blocks * 128);
+ return 0;
+}
+
+static int adv761x_set_edid(struct v4l2_subdev *sd,
+ struct v4l2_subdev_edid *edid)
+{
+ struct adv761x_state *state = to_state(sd);
+ int ret;
+
+ if (edid->pad != 0)
+ return -EINVAL;
+
+ if (edid->start_block != 0)
+ return -EINVAL;
+
+ if (edid->blocks == 0) {
+ /* Pull down the hotplug pin */
+ v4l2_subdev_notify(sd, ADV761X_HOTPLUG, (void *)0);
+ /* Disable I2C access to internal EDID RAM from DDC port */
+ rep_write(sd, 0x74, 0x0);
+ state->edid_blocks = 0;
+ return 0;
+ }
+
+ if (edid->blocks > 2)
+ return -E2BIG;
+
+ if (!edid->edid)
+ return -EINVAL;
+
+ memcpy(state->edid, edid->edid, 128 * edid->blocks);
+ state->edid_blocks = edid->blocks;
+
+ ret = edid_write_block(sd, 128 * edid->blocks, state->edid);
+ if (ret < 0)
+ v4l2_err(sd, "Writing EDID failed\n");
+
+ return ret;
+}
+
+/* v4l2_ctrl_ops */
+static int adv761x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_subdev *sd = to_sd(ctrl);
+ u8 val = ctrl->val;
+ int ret;
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ret = cp_write(sd, 0x3c, val);
+ break;
+ case V4L2_CID_CONTRAST:
+ ret = cp_write(sd, 0x3a, val);
+ break;
+ case V4L2_CID_SATURATION:
+ ret = cp_write(sd, 0x3b, val);
+ break;
+ case V4L2_CID_HUE:
+ ret = cp_write(sd, 0x3d, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/* V4L structures */
+static const struct v4l2_subdev_core_ops adv761x_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = adv761x_g_register,
+ .s_register = adv761x_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops adv761x_video_ops = {
+ .g_input_status = adv761x_g_input_status,
+ .g_mbus_fmt = adv761x_g_mbus_fmt,
+ .try_mbus_fmt = adv761x_g_mbus_fmt,
+ .s_mbus_fmt = adv761x_g_mbus_fmt,
+ .enum_mbus_fmt = adv761x_enum_mbus_fmt,
+ .g_mbus_config = adv761x_g_mbus_config,
+};
+
+static const struct v4l2_subdev_pad_ops adv761x_pad_ops = {
+ .get_edid = adv761x_get_edid,
+ .set_edid = adv761x_set_edid,
+};
+
+static const struct v4l2_subdev_ops adv761x_ops = {
+ .core = &adv761x_core_ops,
+ .video = &adv761x_video_ops,
+ .pad = &adv761x_pad_ops,
+};
+
+static const struct v4l2_ctrl_ops adv761x_ctrl_ops = {
+ .s_ctrl = adv761x_s_ctrl,
+};
+
+/* Device initialization and clean-up */
+static void adv761x_unregister_clients(struct adv761x_state *state)
+{
+ if (state->i2c_cec)
+ i2c_unregister_device(state->i2c_cec);
+ if (state->i2c_inf)
+ i2c_unregister_device(state->i2c_inf);
+ if (state->i2c_dpll)
+ i2c_unregister_device(state->i2c_dpll);
+ if (state->i2c_rep)
+ i2c_unregister_device(state->i2c_rep);
+ if (state->i2c_edid)
+ i2c_unregister_device(state->i2c_edid);
+ if (state->i2c_hdmi)
+ i2c_unregister_device(state->i2c_hdmi);
+ if (state->i2c_cp)
+ i2c_unregister_device(state->i2c_cp);
+}
+
+static struct i2c_client *adv761x_dummy_client(struct v4l2_subdev *sd,
+ u8 addr, u8 def_addr, u8 io_reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!addr)
+ addr = def_addr;
+
+ io_write(sd, io_reg, addr << 1);
+ return i2c_new_dummy(client->adapter, addr);
+}
+
+static inline int adv761x_check_rev(struct i2c_client *client)
+{
+ int msb, rev;
+
+ msb = adv_smbus_read_byte_data(client, 0xea);
+ if (msb < 0)
+ return msb;
+
+ rev = adv_smbus_read_byte_data(client, 0xeb);
+ if (rev < 0)
+ return rev;
+
+ rev |= msb << 8;
+
+ switch (rev) {
+ case 0x2051:
+ return 7611;
+ case 0x2041:
+ return 7612;
+ default:
+ break;
+ }
+
+ return -ENODEV;
+}
+
+static int adv761x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adv761x_platform_data *pdata;
+ struct adv761x_state *state;
+ struct v4l2_ctrl_handler *ctrl_hdl;
+ struct v4l2_subdev *sd;
+ int irq, ret;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ /* Check chip revision */
+ ret = adv761x_check_rev(client);
+ if (ret < 0)
+ return ret;
+
+ v4l_info(client, "Chip found @ 0x%02x (adv%d)\n", client->addr, ret);
+
+ /* Get platform data */
+ if (id->driver_data == ADV761X_SOC_CAM_QUIRK) {
+ struct soc_camera_subdev_desc *ssdd;
+
+ v4l_info(client, "Using SoC camera glue\n");
+ ssdd = soc_camera_i2c_to_desc(client);
+ pdata = ssdd ? ssdd->drv_priv : NULL;
+ } else {
+ pdata = client->dev.platform_data;
+ }
+
+ if (!pdata) {
+ v4l_err(client, "No platform data found\n");
+ return -ENODEV;
+ }
+
+ state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
+ if (state == NULL) {
+ v4l_err(client, "Memory allocation failed\n");
+ return -ENOMEM;
+ }
+
+ init_rwsem(&state->rwsem);
+
+ /* Setup default values */
+ state->cfmt = &adv761x_cfmts[0];
+ state->width = ADV761X_MAX_WIDTH;
+ state->height = ADV761X_MAX_HEIGHT;
+ state->scanmode = V4L2_FIELD_NONE;
+ state->status = V4L2_IN_ST_NO_SIGNAL;
+ state->gpio = -1;
+
+ /* Setup subdev */
+ sd = &state->sd;
+ v4l2_i2c_subdev_init(sd, client, &adv761x_ops);
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ /* Setup I2C clients */
+ state->i2c_cec = adv761x_dummy_client(sd, pdata->i2c_cec, 0x40, 0xf4);
+ state->i2c_inf = adv761x_dummy_client(sd, pdata->i2c_inf, 0x3e, 0xf5);
+ state->i2c_dpll = adv761x_dummy_client(sd, pdata->i2c_dpll, 0x26, 0xf8);
+ state->i2c_rep = adv761x_dummy_client(sd, pdata->i2c_rep, 0x32, 0xf9);
+ state->i2c_edid = adv761x_dummy_client(sd, pdata->i2c_edid, 0x36, 0xfa);
+ state->i2c_hdmi = adv761x_dummy_client(sd, pdata->i2c_hdmi, 0x34, 0xfb);
+ state->i2c_cp = adv761x_dummy_client(sd, pdata->i2c_cp, 0x22, 0xfd);
+ if (!state->i2c_cec || !state->i2c_inf || !state->i2c_dpll ||
+ !state->i2c_rep || !state->i2c_edid ||
+ !state->i2c_hdmi || !state->i2c_cp) {
+ ret = -ENODEV;
+ v4l2_err(sd, "I2C clients setup failed\n");
+ goto err_i2c;
+ }
+
+ /* Setup control handlers */
+ ctrl_hdl = &state->ctrl_hdl;
+ v4l2_ctrl_handler_init(ctrl_hdl, 4);
+ v4l2_ctrl_new_std(ctrl_hdl, &adv761x_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
+ v4l2_ctrl_new_std(ctrl_hdl, &adv761x_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(ctrl_hdl, &adv761x_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(ctrl_hdl, &adv761x_ctrl_ops,
+ V4L2_CID_HUE, 0, 255, 1, 0);
+ sd->ctrl_handler = ctrl_hdl;
+ if (ctrl_hdl->error) {
+ ret = ctrl_hdl->error;
+ v4l2_err(sd, "Control handlers setup failed\n");
+ goto err_hdl;
+ }
+
+ /* Setup media entity */
+ state->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_init(&sd->entity, 1, &state->pad, 0);
+ if (ret) {
+ v4l2_err(sd, "Media entity setup failed\n");
+ goto err_hdl;
+ }
+
+ /* Setup work queue */
+ state->work_queue = create_singlethread_workqueue(client->name);
+ if (!state->work_queue) {
+ ret = -ENOMEM;
+ v4l2_err(sd, "Work queue setup failed\n");
+ goto err_entity;
+ }
+
+ INIT_DELAYED_WORK(&state->enable_hotplug, adv761x_enable_hotplug);
+ INIT_WORK(&state->interrupt_service, adv761x_interrupt_service);
+
+ /* Setup IRQ */
+ irq = client->irq;
+ if (irq <= 0) {
+ v4l_info(client, "Using GPIO IRQ\n");
+ ret = gpio_request_one(pdata->gpio, GPIOF_IN,
+ ADV761X_DRIVER_NAME);
+ if (ret) {
+ v4l_err(client, "GPIO setup failed\n");
+ goto err_work;
+ }
+
+ state->gpio = pdata->gpio;
+ irq = gpio_to_irq(pdata->gpio);
+ }
+
+ if (irq <= 0) {
+ ret = -ENODEV;
+ v4l_err(client, "IRQ not found\n");
+ goto err_gpio;
+ }
+
+ ret = request_irq(irq, adv761x_irq_handler, IRQF_TRIGGER_RISING,
+ ADV761X_DRIVER_NAME, state);
+ if (ret) {
+ v4l_err(client, "IRQ setup failed\n");
+ goto err_gpio;
+ }
+
+ state->irq = irq;
+
+ /* Setup core registers */
+ ret = adv761x_core_init(sd);
+ if (ret < 0) {
+ v4l_err(client, "Core setup failed\n");
+ goto err_core;
+ }
+
+ return 0;
+
+err_core:
+ adv761x_power_off(sd);
+ free_irq(state->irq, state);
+err_gpio:
+ if (gpio_is_valid(state->gpio))
+ gpio_free(state->gpio);
+err_work:
+ cancel_work_sync(&state->interrupt_service);
+ cancel_delayed_work_sync(&state->enable_hotplug);
+ destroy_workqueue(state->work_queue);
+err_entity:
+ media_entity_cleanup(&sd->entity);
+err_hdl:
+ v4l2_ctrl_handler_free(ctrl_hdl);
+err_i2c:
+ adv761x_unregister_clients(state);
+ return ret;
+}
+
+static int adv761x_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct adv761x_state *state = to_state(sd);
+
+ /* Release IRQ/GPIO */
+ free_irq(state->irq, state);
+ if (gpio_is_valid(state->gpio))
+ gpio_free(state->gpio);
+
+ /* Destroy workqueue */
+ cancel_work_sync(&state->interrupt_service);
+ cancel_delayed_work_sync(&state->enable_hotplug);
+ destroy_workqueue(state->work_queue);
+
+ /* Power off */
+ adv761x_power_off(sd);
+
+ /* Clean up*/
+ v4l2_device_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+ adv761x_unregister_clients(state);
+ return 0;
+}
+
+static const struct i2c_device_id adv761x_id[] = {
+ { "adv761x", 0 },
+ { "adv761x-soc_cam", ADV761X_SOC_CAM_QUIRK },
+ { },
+};
+
+MODULE_DEVICE_TABLE(i2c, adv761x_id);
+
+static struct i2c_driver adv761x_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = ADV761X_DRIVER_NAME,
+ },
+ .probe = adv761x_probe,
+ .remove = adv761x_remove,
+ .id_table = adv761x_id,
+};
+
+module_i2c_driver(adv761x_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ADV761X HDMI receiver video decoder driver");
+MODULE_AUTHOR("Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx>");
diff --git a/include/media/adv761x.h b/include/media/adv761x.h
new file mode 100644
index 0000000..ec54361
--- /dev/null
+++ b/include/media/adv761x.h
@@ -0,0 +1,38 @@
+/*
+ * adv761x Analog Devices ADV761X HDMI receiver driver
+ *
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _ADV761X_H_
+#define _ADV761X_H_
+
+struct adv761x_platform_data {
+ /* INT1 GPIO IRQ */
+ int gpio;
+
+ /* I2C addresses: 0 == use default */
+ u8 i2c_cec;
+ u8 i2c_inf;
+ u8 i2c_dpll;
+ u8 i2c_rep;
+ u8 i2c_edid;
+ u8 i2c_hdmi;
+ u8 i2c_cp;
+};
+
+/* Notify events */
+#define ADV761X_HOTPLUG 1
+#define ADV761X_FMT_CHANGE 2
+
+#endif /* _ADV761X_H_ */
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
