Re: [PATCH v2.2 2/4] media: Check for active links on pads with MEDIA_PAD_FL_MUST_CONNECT flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sakari,

Thank you for the patch.

On Wednesday 16 October 2013 00:48:17 Sakari Ailus wrote:
> Do not allow streaming if a pad with MEDIA_PAD_FL_MUST_CONNECT flag is not
> connected by an active link.
> 
> This patch makes it possible to avoid drivers having to check for the most
> common case of link state validation: a sink pad that must be connected.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx>
> Tested-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

I've taken the whole series in my tree and will push it upstream for v3.14.

> ---
>  drivers/media/media-entity.c |   41 ++++++++++++++++++++++++++++++++-------
>  1 file changed, 34 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
> index 2c286c3..37c334e 100644
> --- a/drivers/media/media-entity.c
> +++ b/drivers/media/media-entity.c
> @@ -235,6 +235,8 @@ __must_check int media_entity_pipeline_start(struct
> media_entity *entity, media_entity_graph_walk_start(&graph, entity);
> 
>  	while ((entity = media_entity_graph_walk_next(&graph))) {
> +		DECLARE_BITMAP(active, entity->num_pads);
> +		DECLARE_BITMAP(has_no_links, entity->num_pads);
>  		unsigned int i;
> 
>  		entity->stream_count++;
> @@ -248,21 +250,46 @@ __must_check int media_entity_pipeline_start(struct
> media_entity *entity, if (!entity->ops || !entity->ops->link_validate)
>  			continue;
> 
> +		bitmap_zero(active, entity->num_pads);
> +		bitmap_fill(has_no_links, entity->num_pads);
> +
>  		for (i = 0; i < entity->num_links; i++) {
>  			struct media_link *link = &entity->links[i];
> -
> -			/* Is this pad part of an enabled link? */
> -			if (!(link->flags & MEDIA_LNK_FL_ENABLED))
> -				continue;
> -
> -			/* Are we the sink or not? */
> -			if (link->sink->entity != entity)
> +			struct media_pad *pad = link->sink->entity == entity
> +						? link->sink : link->source;
> +
> +			/* Mark that a pad is connected by a link. */
> +			bitmap_clear(has_no_links, pad->index, 1);
> +
> +			/*
> +			 * Pads that either do not need to connect or
> +			 * are connected through an enabled link are
> +			 * fine.
> +			 */
> +			if (!(pad->flags & MEDIA_PAD_FL_MUST_CONNECT) ||
> +			    link->flags & MEDIA_LNK_FL_ENABLED)
> +				bitmap_set(active, pad->index, 1);
> +
> +			/*
> +			 * Link validation will only take place for
> +			 * sink ends of the link that are enabled.
> +			 */
> +			if (link->sink != pad ||
> +			    !(link->flags & MEDIA_LNK_FL_ENABLED))
>  				continue;
> 
>  			ret = entity->ops->link_validate(link);
>  			if (ret < 0 && ret != -ENOIOCTLCMD)
>  				goto error;
>  		}
> +
> +		/* Either no links or validated links are fine. */
> +		bitmap_or(active, active, has_no_links, entity->num_pads);
> +
> +		if (!bitmap_full(active, entity->num_pads)) {
> +			ret = -EPIPE;
> +			goto error;
> +		}
>  	}
> 
>  	mutex_unlock(&mdev->graph_mutex);
-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux