Hi Wade,
Em Fri, 18 Oct 2013 08:03:21 -0700
Wade Farnsworth <wade_farnsworth@xxxxxxxxxx> escreveu:
> Greetings,
>
> We've found this patch helpful for making some simple performance measurements on
> V4L2 systems using the standard Linux tracers (FTRACE, LTTng, etc.), and were
> wondering if the larger community would find it useful to have this in mainline as
> well.
>
> This patch adds two tracepoints for the VIDIOC_DQBUF and VIDIOC_QBUF ioctls. We've
> identified two ways we can use this information to measure performance, though this
> is likely not an exhaustive list:
>
> 1. Measuring the difference in timestamps between QBUF events on a display device
> provides a throughput (framerate) measurement for the display.
> 2. Measuring the difference between the timestamps on a DQBUF event for a capture
> device and a corresponding timestamp on a QBUF event on a display device provides
> a rough approximation of the latency of that particular frame. However, this
> tends to only work for simple video pipelines where captured and displayed
> frames can be correlated in such a fashion.
>
> Comments are welcome. If there is interest, I'll post another patch suitable
> for merge.
I like the idea of adding those tracepoints.
See my comments below.
>
> Signed-off-by: Wade Farnsworth <wade_farnsworth@xxxxxxxxxx>
> ---
> drivers/media/v4l2-core/v4l2-dev.c | 9 ++++++
> include/trace/events/v4l2.h | 48 ++++++++++++++++++++++++++++++++++++
> 2 files changed, 57 insertions(+), 0 deletions(-)
> create mode 100644 include/trace/events/v4l2.h
>
> diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c
> index b5aaaac..1cc1749 100644
> --- a/drivers/media/v4l2-core/v4l2-dev.c
> +++ b/drivers/media/v4l2-core/v4l2-dev.c
> @@ -31,6 +31,10 @@
> #include <media/v4l2-device.h>
> #include <media/v4l2-ioctl.h>
>
> +
> +#define CREATE_TRACE_POINTS
> +#include <trace/events/v4l2.h>
> +
> #define VIDEO_NUM_DEVICES 256
> #define VIDEO_NAME "video4linux"
>
> @@ -391,6 +395,11 @@ static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
> } else
> ret = -ENOTTY;
>
> + if (cmd == VIDIOC_DQBUF)
> + trace_v4l2_dqbuf(vdev->minor, (struct v4l2_buffer *)arg);
> + else if (cmd == VIDIOC_QBUF)
> + trace_v4l2_qbuf(vdev->minor, (struct v4l2_buffer *)arg);
> +
> return ret;
> }
>
> diff --git a/include/trace/events/v4l2.h b/include/trace/events/v4l2.h
> new file mode 100644
> index 0000000..1697441
> --- /dev/null
> +++ b/include/trace/events/v4l2.h
> @@ -0,0 +1,48 @@
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM v4l2
> +
> +#if !defined(_TRACE_V4L2_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _TRACE_V4L2_H
> +
> +#include <linux/tracepoint.h>
> +
> +TRACE_EVENT(v4l2_dqbuf,
> + TP_PROTO(int minor, struct v4l2_buffer *buf),
> +
> + TP_ARGS(minor, buf),
> +
> + TP_STRUCT__entry(
> + __field(int, minor)
> + __field(s64, ts)
> + ),
> +
> + TP_fast_assign(
> + __entry->minor = minor;
> + __entry->ts = timeval_to_ns(&buf->timestamp);
> + ),
> +
> + TP_printk("%d [%lld]", __entry->minor, __entry->ts)
> +);
> +
> +TRACE_EVENT(v4l2_qbuf,
> + TP_PROTO(int minor, struct v4l2_buffer *buf),
> +
> + TP_ARGS(minor, buf),
> +
> + TP_STRUCT__entry(
> + __field(int, minor)
> + __field(s64, ts)
> + ),
> +
> + TP_fast_assign(
> + __entry->minor = minor;
> + __entry->ts = timeval_to_ns(&buf->timestamp);
On both events, you're only decoding the buffer timestamp. I think you
should also decode the other metadata there. For example, on some devices,
the dqbuf order is different than the qbuf one. One may need to associate
both, in order to be able to time how much time a buffer takes to be
filled.
> + ),
> +
> + TP_printk("%d [%lld]", __entry->minor, __entry->ts)
> +);
> +
> +#endif /* if !defined(_TRACE_V4L2_H) || defined(TRACE_HEADER_MULTI_READ) */
> +
> +/* This part must be outside protection */
> +#include <trace/define_trace.h>
--
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
