Hi Laurent,
Sorry about the late response, I had scrapped the DT patch out of the
VPE series since there were dependencies on crossbar drivers and some
other baseport stuff. Comments below.
On Friday 09 August 2013 03:41 AM, Laurent Pinchart wrote:
Hi Archit,
Thank you for the patch.
On Friday 02 August 2013 19:33:43 Archit Taneja wrote:
Add a DT node for VPE in dra7.dtsi. This is experimental because we might
need to split the VPE address space a bit more, and also because the IRQ
line described is accessible the IRQ crossbar driver is added for DRA7XX.
Cc: Rajendra Nayak <rnayak@xxxxxx>
Cc: Sricharan R <r.sricharan@xxxxxx>
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
Documentation is missing :-) As this is an experimental patch you can probably
document the bindings later.
Yes, I will work on that.
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ce9a0f0..3237972 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -484,6 +484,17 @@
dmas = <&sdma 70>, <&sdma 71>;
dma-names = "tx0", "rx0";
};
+
+ vpe {
+ compatible = "ti,vpe";
+ ti,hwmods = "vpe";
+ reg = <0x489d0000 0xd000>, <0x489dd000 0x400>;
+ reg-names = "vpe", "vpdma";
+ interrupts = <0 159 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
Are #address-cells and #size-cells really needed ?
These aren't needed, vpe derives the address info from it's parent(ocp).
I didn't know that the child nodes inherit these params from the parent.
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
