Mike, unfortunately no documentation can be referenced except preliminary version of datasheet (1).This change is based on lucky guess and supported by lot of testing on real hardware. This change add support for devices with Xtal frequency bellow 28.8MHz. >From Nint are computed values of Ni and Si. For 28.8MHz crystal can reach up to 12 / 3 (Ni / Si). Tuner supports crystals with frequencies (1) 12, 16, 20, 20.48, 24, 27, 28.8, 32 MHz, but this kind of device is rare to found. Allowing Ni to go up to 15 instead of only 12 should be safe and for 15 / 3 (Ni / Si) we can compute limit for Nint = max(Ni) * 4 + max(Si) + 13 = 76. If This is sufficient and acceptable explanation I can add some sort of documentation into patch and resend it (both patches, I can prove I'm right :) (1) http://rtl-sdr.com/wp-content/uploads/2013/04/R820T_datasheet-Non_R-20111130_unlocked.pdf > Jiří, > > Do you have any documentation that supports this value change? > Changing this value affects the algorithm, and we'd be happier making > this change if the patch included some better description and perhaps > a reference explaining why the new value is correct. > > Regards, > > Mike Krufky > > On Sun, Sep 29, 2013 at 6:45 AM, Jiří Pinkava <j-pi@xxxxxxxxx> wrote: >> >> Use full range of VCO parameters, fixes tunning for some frequencies. >> --- >> drivers/media/tuners/r820t.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/media/tuners/r820t.c b/drivers/media/tuners/r820t.c >> index 1c23666..e25c720 100644 >> --- a/drivers/media/tuners/r820t.c >> +++ b/drivers/media/tuners/r820t.c >> @@ -637,7 +637,7 @@ static int r820t_set_pll(struct r820t_priv *priv, >> enum v4l2_tuner_type type, >> vco_fra = pll_ref * 129 / 128; >> } >> >> - if (nint > 63) { >> + if (nint > 76) { >> tuner_info("No valid PLL values for %u kHz!\n", freq); >> return -EINVAL; >> } >> -- >> 1.8.3.2 >> >> -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
