Tested: Composite: http://imgur.com/Rb1TCF3 TV: http://imgur.com/KNrfsmv Firmware used: xc3028-v27.fw Not tested: audio, component, s-video, mpeg2 encoder, FM radio. For audio it uses an CD style cable to connect to the analog "CD_IN" on the motherboard. I didn't found how to unmute it (alsamixer do not show an CD or AUX channel). Signed-off-by: Anca Emanuel <anca.emanuel@xxxxxxxxx> --- drivers/media/pci/cx23885/cx23885-cards.c | 41 +++++++++++++++++++++++++++++++ drivers/media/pci/cx23885/cx23885-video.c | 3 ++- drivers/media/pci/cx23885/cx23885.h | 1 + 3 files changed, 44 insertions(+), 1 deletion(-) diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 6a71a96..4bbb126 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -223,6 +223,39 @@ struct cx23885_board cx23885_boards[] = { .name = "Leadtek Winfast PxDVR3200 H", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200] = { + .name = "Leadtek Winfast PxPVR2200", + .porta = CX23885_ANALOG_VIDEO, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .tuner_bus = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN2_CH1 | + CX25840_VIN5_CH2, + .amux = CX25840_AUDIO8, + .gpio0 = 0x704040, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE1, + .amux = CX25840_AUDIO7, + .gpio0 = 0x704040, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + .amux = CX25840_AUDIO7, + .gpio0 = 0x704040, + }, { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_VIN7_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN8_CH3 | + CX25840_COMPONENT_ON, + .amux = CX25840_AUDIO7, + .gpio0 = 0x704040, + } }, + }, [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = { .name = "Leadtek Winfast PxDVR3200 H XC4000", .porta = CX23885_ANALOG_VIDEO, @@ -688,6 +721,10 @@ struct cx23885_subid cx23885_subids[] = { .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H, }, { .subvendor = 0x107d, + .subdevice = 0x6f21, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200, + }, { + .subvendor = 0x107d, .subdevice = 0x6f39, .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000, }, { @@ -1043,6 +1080,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: @@ -1208,6 +1246,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x000f000f); break; case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: @@ -1704,6 +1743,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_HAUPPAUGE_HVR1270: @@ -1733,6 +1773,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c index 1616868..7891f34 100644 --- a/drivers/media/pci/cx23885/cx23885-video.c +++ b/drivers/media/pci/cx23885/cx23885-video.c @@ -1865,7 +1865,8 @@ int cx23885_video_register(struct cx23885_dev *dev) v4l2_subdev_call(sd, tuner, s_type_addr, &tun_setup); - if (dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXTV1200) { + if ((dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXTV1200) || + (dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200)) { struct xc2028_ctrl ctrl = { .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64 diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h index 038caf5..b0b47a6 100644 --- a/drivers/media/pci/cx23885/cx23885.h +++ b/drivers/media/pci/cx23885/cx23885.h @@ -93,6 +93,7 @@ #define CX23885_BOARD_PROF_8000 37 #define CX23885_BOARD_HAUPPAUGE_HVR4400 38 #define CX23885_BOARD_AVERMEDIA_HC81R 39 +#define CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200 40 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
