Hi Nilesh, On Wednesday 04 September 2013 11:30:09 purchase@xxxxxxxxxxxxxxxxx wrote: > On Wednesday, September 04, 2013 11:19 AM Nilesh Mane wrote: > > On Sunday 01 September 2013 12:35:35 purchase@xxxxxxxxxxxxxxxxx wrote: > >> On Sunday, September 01, 2013 1:59 AM Laurent Pinchart wrote: > > > On Saturday 31 August 2013 10:07:14 purchase@xxxxxxxxxxxxxxxxx wrote: > >> >> You have done a great work for snapshot mode image sensor driver for > >> >> linux. I am using your media control tool with yavta test application > >> >> for interfacing the mt9v032 image sensor with Gumstix Overo Water Com > >> >> board. I have successfully tested the snapshot mode with this > >> >> combination. But the problem is that, when I attempt to grab lots of > >> >> images (thousands) of images by this test application yavta. I found > >> >> that the free memory goes increasing by some amount which will not get > >> >> free. Afterwards I have calculate the amount of ram acquires on every > >> >> snap is about 0.618 KB (after averaging 100000 frames). Will you > >> >> please Give me any reason why this is happening with this test > >> >> application? And how can I get overcome on this problem. > >> > > >> > That's definitely not expected and should be debugged. First of all, is > >> > the memory released when you stop yavta ? If it isn't then we have a > >> > kernel bug, if it is the bug could be either on the kernel side or the > >> > application side. > >> > >> Thank you for quick reply, > >> > >> I have checked the memory status before starting yavta and while running > >> . > >> then after killing yavta. the results are as below. > >> > >> > >> Example condition 1 > >> 1) Before Starting yavta Free memory is 370528KB > >> 2) After running yavta and before first trigger free memory is 370108KB > >> //acquired 420KB for initial buffer allocations > >> 3) After 1008 triggers free memory is 369488KB > >> //unexpected 620KB for 1008 images ( I.e. 0.61KB / image ) acquired > >> 4) After killing yavta free memory is 369908KB > >> //620KB not released only 420KB released > >> > >> Example condition 2 > >> 1) Before Starting yavta Free memory is 366064KB > >> 2) After running yavta and before first trigger free memory is 365520KB > >> //acquired 544KB for initial buffer allocations > >> 3) After 10000 triggers free memory is 359328KB > >> //unexpected 6192KB for 10000 images ( I.e. 0.6192KB / image ) acquired > >> 4) After killing yavta free memory is 359864KB > >> //6200KB not released only 536KB released > >> > >> As per your guidance can I conclude that memory acquired during > >> triggering and image grab process is an bug in kernel or driver ? > > > > Not yet, you should be careful about how you compute the free memory. > > Merely running free won't give you an accurate information about potential > > memory leaks. > > > > I also don't know what you mean by trigger above, could you please > > elaborate ? > > First of all, I mean to say triggering is the image acquisition by > application on external trigger applied to camera which is in snapshot mode. > ok I can understand the size I have calculate is not exact but I just want > to tell you that the memory acquired by the application is partially > released , memory Acquired during the images grabbed on external triggers > is not released after killing the application. The mainline mt9v032 driver doesn't support snapshot mode as far as I know. This leads me to believe that the kernel you are using contains modified code compared to the mainline version. A memory leak could have been introduced there. This is one more reason to test a mainline kernel first. > >> If it is how can I found it to get resolve my error? > >> > >> From where can I get the correct source for MT9V032 driver working in > >> snapshot mode and kernel source code(3.2.0+ or any). for my platform? > >> Platform : Gumstix Overo Water Com > >> OS : Angstrom > >> Kernel : 3.2.0+ > >> Image sensor : MT9V032 > > > > 3.2.0 is old, you should upgrade to the latest mainline kernel. The > > mt9v032 driver is present in mainline, and sample board code is available > > at http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/board/ > > overo/mt9v032. > > Can I get the detailed documentation by referring it I can Download > mainline kernel, build it with the MT9V032 camera driver in snapshot mode > for specific board (Gumstix over water com) and test it with media control > and yavta test application. I'm afraid my spare time is limited, and I can't give you a detailed step-by- step explanation. I'm pretty sure you can find plenty of resources online to help you building a custom kernel for the Gumstix Overo. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html