On Mon 26 August 2013 01:02:01 Sakari Ailus wrote: > Document that monotonic timestamps are taken after the corresponding frame > has been received, not when the reception has begun. This corresponds to the > reality of current drivers: the timestamp is naturally taken when the > hardware triggers an interrupt to tell the driver to handle the received > frame. > > Remove the note on timestamp accurary as it is fairly subjective what is accurary -> accuracy > actually an unstable timestamp. > > Also remove explanation that output buffer timestamps can be used to delay > outputting a frame. > > Remove the footnote saying we always use realtime clock. > > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx> > --- > Documentation/DocBook/media/v4l/io.xml | 47 ++++++-------------------------- > 1 file changed, 8 insertions(+), 39 deletions(-) > > diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml > index 2c4c068..cd5f9de 100644 > --- a/Documentation/DocBook/media/v4l/io.xml > +++ b/Documentation/DocBook/media/v4l/io.xml > @@ -654,38 +654,11 @@ plane, are stored in struct <structname>v4l2_plane</structname> instead. > In that case, struct <structname>v4l2_buffer</structname> contains an array of > plane structures.</para> > > - <para>Nominally timestamps refer to the first data byte transmitted. > -In practice however the wide range of hardware covered by the V4L2 API > -limits timestamp accuracy. Often an interrupt routine will > -sample the system clock shortly after the field or frame was stored > -completely in memory. So applications must expect a constant > -difference up to one field or frame period plus a small (few scan > -lines) random error. The delay and error can be much > -larger due to compression or transmission over an external bus when > -the frames are not properly stamped by the sender. This is frequently > -the case with USB cameras. Here timestamps refer to the instant the > -field or frame was received by the driver, not the capture time. These > -devices identify by not enumerating any video standards, see <xref > -linkend="standard" />.</para> > - > - <para>Similar limitations apply to output timestamps. Typically > -the video hardware locks to a clock controlling the video timing, the > -horizontal and vertical synchronization pulses. At some point in the > -line sequence, possibly the vertical blanking, an interrupt routine > -samples the system clock, compares against the timestamp and programs > -the hardware to repeat the previous field or frame, or to display the > -buffer contents.</para> > - > - <para>Apart of limitations of the video device and natural > -inaccuracies of all clocks, it should be noted system time itself is > -not perfectly stable. It can be affected by power saving cycles, > -warped to insert leap seconds, or even turned back or forth by the > -system administrator affecting long term measurements. <footnote> > - <para>Since no other Linux multimedia > -API supports unadjusted time it would be foolish to introduce here. We > -must use a universally supported clock to synchronize different media, > -hence time of day.</para> > - </footnote></para> > + <para>On timestamp types that are sampled from the system clock On -> For > +(V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC) it is guaranteed that the timestamp is > +taken after the complete frame has been received (or transmitted in > +case of video output devices). For other kinds of > +timestamps this may vary depending on the driver.</para> > > <table frame="none" pgwide="1" id="v4l2-buffer"> > <title>struct <structname>v4l2_buffer</structname></title> > @@ -745,13 +718,9 @@ applications when an output stream.</entry> > byte was captured, as returned by the > <function>clock_gettime()</function> function for the relevant > clock id; see <constant>V4L2_BUF_FLAG_TIMESTAMP_*</constant> in > - <xref linkend="buffer-flags" />. For output streams the data > - will not be displayed before this time, secondary to the nominal > - frame rate determined by the current video standard in enqueued > - order. Applications can for example zero this field to display > - frames as soon as possible. The driver stores the time at which > - the first data byte was actually sent out in the > - <structfield>timestamp</structfield> field. This permits > + <xref linkend="buffer-flags" />. For output streams he driver he -> the > + stores the time at which the first data byte was actually sent out first -> last Otherwise it would be inconsistent with what you say above (i.e. timestamp is set after the complete frame has been transmitted). > + in the <structfield>timestamp</structfield> field. This permits > applications to monitor the drift between the video and system > clock.</para></entry> > </row> > Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html