Hi Hans,
On Wednesday 21 of August 2013 08:53:55 Hans Verkuil wrote:
> On 08/21/2013 08:34 AM, Arun Kumar K wrote:
> > This patch adds subdev driver for Samsung S5K4E5 raw image sensor.
> > Like s5k6a3, it is also another fimc-is firmware controlled
> > sensor. This minimal sensor driver doesn't do any I2C communications
> > as its done by ISP firmware. It can be updated if needed to a
> > regular sensor driver by adding the I2C communication.
> >
> > Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx>
> > Reviewed-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> > ---
> >
> > .../devicetree/bindings/media/i2c/s5k4e5.txt | 43 +++
> > drivers/media/i2c/Kconfig | 8 +
> > drivers/media/i2c/Makefile | 1 +
> > drivers/media/i2c/s5k4e5.c | 361
> > ++++++++++++++++++++ 4 files changed, 413 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/media/i2c/s5k4e5.txt create mode
> > 100644 drivers/media/i2c/s5k4e5.c
>
> ...
>
> > diff --git a/drivers/media/i2c/s5k4e5.c b/drivers/media/i2c/s5k4e5.c
> > new file mode 100644
> > index 0000000..0a6ece6
> > --- /dev/null
> > +++ b/drivers/media/i2c/s5k4e5.c
> > @@ -0,0 +1,361 @@
> > +/*
> > + * Samsung S5K4E5 image sensor driver
> > + *
> > + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> > + * Author: Arun Kumar K <arun.kk@xxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > modify + * it under the terms of the GNU General Public License
> > version 2 as + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/errno.h>
> > +#include <linux/gpio.h>
> > +#include <linux/i2c.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/slab.h>
> > +#include <linux/videodev2.h>
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +#define S5K4E5_SENSOR_MAX_WIDTH 2576
> > +#define S5K4E5_SENSOR_MAX_HEIGHT 1930
> > +
> > +#define S5K4E5_SENSOR_ACTIVE_WIDTH 2560
> > +#define S5K4E5_SENSOR_ACTIVE_HEIGHT 1920
> > +
> > +#define S5K4E5_SENSOR_MIN_WIDTH (32 + 16)
> > +#define S5K4E5_SENSOR_MIN_HEIGHT (32 + 10)
> > +
> > +#define S5K4E5_DEF_WIDTH 1296
> > +#define S5K4E5_DEF_HEIGHT 732
> > +
> > +#define S5K4E5_DRV_NAME "S5K4E5"
> > +#define S5K4E5_CLK_NAME "mclk"
> > +
> > +#define S5K4E5_NUM_SUPPLIES 2
> > +
> > +#define S5K4E5_DEF_CLK_FREQ 24000000
> > +
> > +/**
> > + * struct s5k4e5 - s5k4e5 sensor data structure
> > + * @dev: pointer to this I2C client device structure
> > + * @subdev: the image sensor's v4l2 subdev
> > + * @pad: subdev media source pad
> > + * @supplies: image sensor's voltage regulator supplies
> > + * @gpio_reset: GPIO connected to the sensor's reset pin
> > + * @lock: mutex protecting the structure's members below
> > + * @format: media bus format at the sensor's source pad
> > + */
> > +struct s5k4e5 {
> > + struct device *dev;
> > + struct v4l2_subdev subdev;
> > + struct media_pad pad;
> > + struct regulator_bulk_data supplies[S5K4E5_NUM_SUPPLIES];
> > + int gpio_reset;
> > + struct mutex lock;
> > + struct v4l2_mbus_framefmt format;
> > + struct clk *clock;
> > + u32 clock_frequency;
> > +};
> > +
> > +static const char * const s5k4e5_supply_names[] = {
> > + "svdda",
> > + "svddio"
> > +};
>
> I'm no regulator expert, but shouldn't this list come from the DT or
> platform_data? Or are these names specific to this sensor?
This is a list of regulator input (aka supply) names. In other words those
are usually names of pins of the consumer device (s5k4e5 chip in this
case) to which the regulators are connected. They are used as lookup keys
when looking up regulators, either from device tree or lookup tables.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
