Add a DT node for VPE in dra7.dtsi. This is experimental because we might need to split the VPE address space a bit more, and also because the IRQ line described is accessible the IRQ crossbar driver is added for DRA7XX. Cc: Rajendra Nayak <rnayak@xxxxxx> Cc: Sricharan R <r.sricharan@xxxxxx> Signed-off-by: Archit Taneja <archit@xxxxxx> --- arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index ce9a0f0..7c1cbfe 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -484,6 +484,17 @@ dmas = <&sdma 70>, <&sdma 71>; dma-names = "tx0", "rx0"; }; + + vpe { + compatible = "ti,vpe"; + ti,hwmods = "vpe"; + reg = <0x489d0000 0xd000>, <0x489dd000 0x400>; + reg-names = "vpe", "vpdma"; + interrupts = <0 158 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; clocks { -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html