From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/adv7511.c | 1192 +++++++++++++++++++++++++++++++++++++++++++
include/media/adv7511.h | 49 ++
4 files changed, 1253 insertions(+)
create mode 100644 drivers/media/i2c/adv7511.c
create mode 100644 include/media/adv7511.h
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 847b711..d18be19 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -429,6 +429,17 @@ config VIDEO_ADV7393
To compile this driver as a module, choose M here: the
module will be called adv7393.
+config VIDEO_ADV7511
+ tristate "Analog Devices ADV7511 encoder"
+ depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ ---help---
+ Support for the Analog Devices ADV7511 video encoder.
+
+ This is a Analog Devices HDMI transmitter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7511.
+
config VIDEO_AD9389B
tristate "Analog Devices AD9389B encoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index b4cf972..9f462df 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o
obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o
obj-$(CONFIG_VIDEO_ADV7842) += adv7842.o
obj-$(CONFIG_VIDEO_AD9389B) += ad9389b.o
+obj-$(CONFIG_VIDEO_ADV7511) += adv7511.o
obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
obj-$(CONFIG_VIDEO_VS6624) += vs6624.o
obj-$(CONFIG_VIDEO_BT819) += bt819.o
diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c
new file mode 100644
index 0000000..c85aa47
--- /dev/null
+++ b/drivers/media/i2c/adv7511.c
@@ -0,0 +1,1192 @@
+/*
+ * Analog Devices ADV7511 HDMI Transmitter Device Driver
+ *
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/v4l2-dv-timings.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/adv7511.h>
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+MODULE_DESCRIPTION("Analog Devices ADV7511 HDMI Transmitter Device Driver");
+MODULE_AUTHOR("Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+#define MASK_ADV7511_EDID_RDY_INT 0x04
+#define MASK_ADV7511_MSEN_INT 0x40
+#define MASK_ADV7511_HPD_INT 0x80
+
+#define MASK_ADV7511_HPD_DETECT 0x40
+#define MASK_ADV7511_MSEN_DETECT 0x20
+#define MASK_ADV7511_EDID_RDY 0x10
+
+#define EDID_MAX_RETRIES (8)
+#define EDID_DELAY 250
+#define EDID_MAX_SEGM 8
+
+#define ADV7511_MAX_WIDTH 1920
+#define ADV7511_MAX_HEIGHT 1200
+#define ADV7511_MIN_PIXELCLOCK 20000000
+#define ADV7511_MAX_PIXELCLOCK 225000000
+
+/*
+**********************************************************************
+*
+* Arrays with configuration parameters for the ADV7511
+*
+**********************************************************************
+*/
+
+struct i2c_reg_value {
+ unsigned char reg;
+ unsigned char value;
+};
+
+struct adv7511_state_edid {
+ /* total number of blocks */
+ u32 blocks;
+ /* Number of segments read */
+ u32 segments;
+ uint8_t data[EDID_MAX_SEGM * 256];
+ /* Number of EDID read retries left */
+ unsigned read_retries;
+ bool complete;
+};
+
+struct adv7511_state {
+ struct adv7511_platform_data pdata;
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct v4l2_ctrl_handler hdl;
+ int chip_revision;
+ uint8_t i2c_edid_addr;
+ uint8_t i2c_cec_addr;
+ /* Is the adv7511 powered on? */
+ bool power_on;
+ /* Did we receive hotplug and rx-sense signals? */
+ bool have_monitor;
+ /* timings from s_dv_timings */
+ struct v4l2_dv_timings dv_timings;
+ /* controls */
+ struct v4l2_ctrl *hdmi_mode_ctrl;
+ struct v4l2_ctrl *hotplug_ctrl;
+ struct v4l2_ctrl *rx_sense_ctrl;
+ struct v4l2_ctrl *have_edid0_ctrl;
+ struct v4l2_ctrl *rgb_quantization_range_ctrl;
+ struct i2c_client *i2c_edid;
+ struct adv7511_state_edid edid;
+ /* Running counter of the number of detected EDIDs (for debugging) */
+ unsigned edid_detect_counter;
+ struct workqueue_struct *work_queue;
+ struct delayed_work edid_handler; /* work entry */
+};
+
+static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd);
+static bool adv7511_check_edid_status(struct v4l2_subdev *sd);
+static void adv7511_setup(struct v4l2_subdev *sd);
+static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq);
+static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
+
+
+static const struct v4l2_dv_timings_cap adv7511_timings_cap = {
+ .type = V4L2_DV_BT_656_1120,
+ .bt = {
+ .max_width = ADV7511_MAX_WIDTH,
+ .max_height = ADV7511_MAX_HEIGHT,
+ .min_pixelclock = ADV7511_MIN_PIXELCLOCK,
+ .max_pixelclock = ADV7511_MAX_PIXELCLOCK,
+ .standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+ .capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
+ V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM,
+ },
+};
+
+static inline struct adv7511_state *get_adv7511_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct adv7511_state, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct adv7511_state, hdl)->sd;
+}
+
+/* ------------------------ I2C ----------------------------------------------- */
+
+static s32 adv_smbus_read_byte_data_check(struct i2c_client *client,
+ u8 command, bool check)
+{
+ union i2c_smbus_data data;
+
+ if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_BYTE_DATA, &data))
+ return data.byte;
+ if (check)
+ v4l_err(client, "error reading %02x, %02x\n",
+ client->addr, command);
+ return -1;
+}
+
+static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command)
+{
+ int i;
+ for (i = 0; i < 3; i++) {
+ int ret = adv_smbus_read_byte_data_check(client, command, true);
+ if (ret >= 0) {
+ if (i)
+ v4l_err(client, "read ok after %d retries\n", i);
+ return ret;
+ }
+ }
+ v4l_err(client, "read failed\n");
+ return -1;
+}
+
+static int adv7511_rd(struct v4l2_subdev *sd, u8 reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return adv_smbus_read_byte_data(client, reg);
+}
+
+static int adv7511_wr(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret == 0)
+ return 0;
+ }
+ v4l2_err(sd, "%s: i2c write error\n", __func__);
+ return ret;
+}
+
+/* To set specific bits in the register, a clear-mask is given (to be AND-ed),
+ and then the value-mask (to be OR-ed). */
+static inline void adv7511_wr_and_or(struct v4l2_subdev *sd, u8 reg, uint8_t clr_mask, uint8_t val_mask)
+{
+ adv7511_wr(sd, reg, (adv7511_rd(sd, reg) & clr_mask) | val_mask);
+}
+
+static int adv_smbus_read_i2c_block_data(struct i2c_client *client,
+ u8 command, unsigned length, u8 *values)
+{
+ union i2c_smbus_data data;
+ int ret;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
+
+ ret = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
+ memcpy(values, data.block + 1, length);
+ return ret;
+}
+
+static inline void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ int i;
+ int err = 0;
+
+ v4l2_dbg(1, debug, sd, "%s:\n", __func__);
+
+ for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX)
+ err = adv_smbus_read_i2c_block_data(state->i2c_edid, i,
+ I2C_SMBUS_BLOCK_MAX, buf + i);
+ if (err)
+ v4l2_err(sd, "%s: i2c read error\n", __func__);
+}
+
+static inline bool adv7511_have_hotplug(struct v4l2_subdev *sd)
+{
+ return adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT;
+}
+
+static inline bool adv7511_have_rx_sense(struct v4l2_subdev *sd)
+{
+ return adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT;
+}
+
+static void adv7511_csc_conversion_mode(struct v4l2_subdev *sd, uint8_t mode)
+{
+ adv7511_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5);
+}
+
+static void adv7511_csc_coeff(struct v4l2_subdev *sd,
+ u16 A1, u16 A2, u16 A3, u16 A4,
+ u16 B1, u16 B2, u16 B3, u16 B4,
+ u16 C1, u16 C2, u16 C3, u16 C4)
+{
+ /* A */
+ adv7511_wr_and_or(sd, 0x18, 0xe0, A1>>8);
+ adv7511_wr(sd, 0x19, A1);
+ adv7511_wr_and_or(sd, 0x1A, 0xe0, A2>>8);
+ adv7511_wr(sd, 0x1B, A2);
+ adv7511_wr_and_or(sd, 0x1c, 0xe0, A3>>8);
+ adv7511_wr(sd, 0x1d, A3);
+ adv7511_wr_and_or(sd, 0x1e, 0xe0, A4>>8);
+ adv7511_wr(sd, 0x1f, A4);
+
+ /* B */
+ adv7511_wr_and_or(sd, 0x20, 0xe0, B1>>8);
+ adv7511_wr(sd, 0x21, B1);
+ adv7511_wr_and_or(sd, 0x22, 0xe0, B2>>8);
+ adv7511_wr(sd, 0x23, B2);
+ adv7511_wr_and_or(sd, 0x24, 0xe0, B3>>8);
+ adv7511_wr(sd, 0x25, B3);
+ adv7511_wr_and_or(sd, 0x26, 0xe0, B4>>8);
+ adv7511_wr(sd, 0x27, B4);
+
+ /* C */
+ adv7511_wr_and_or(sd, 0x28, 0xe0, C1>>8);
+ adv7511_wr(sd, 0x29, C1);
+ adv7511_wr_and_or(sd, 0x2A, 0xe0, C2>>8);
+ adv7511_wr(sd, 0x2B, C2);
+ adv7511_wr_and_or(sd, 0x2C, 0xe0, C3>>8);
+ adv7511_wr(sd, 0x2D, C3);
+ adv7511_wr_and_or(sd, 0x2E, 0xe0, C4>>8);
+ adv7511_wr(sd, 0x2F, C4);
+}
+
+static void adv7511_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable)
+{
+ if (enable) {
+ uint8_t csc_mode = 0;
+ adv7511_csc_conversion_mode(sd, csc_mode);
+ adv7511_csc_coeff(sd,
+ 4096-564, 0, 0, 256,
+ 0, 4096-564, 0, 256,
+ 0, 0, 4096-564, 256);
+ /* enable CSC */
+ adv7511_wr_and_or(sd, 0x18, 0x7f, 0x80);
+ /* AVI infoframe: Limited range RGB (16-235) */
+ adv7511_wr_and_or(sd, 0x57, 0xf3, 0x04);
+ } else {
+ /* disable CSC */
+ adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0);
+ /* AVI infoframe: Full range RGB (0-255) */
+ adv7511_wr_and_or(sd, 0x57, 0xf3, 0x08);
+ }
+}
+
+static void adv7511_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) {
+ /* CEA format, not IT */
+ adv7511_wr_and_or(sd, 0x57, 0x7f, 0x00);
+ } else {
+ /* IT format */
+ adv7511_wr_and_or(sd, 0x57, 0x7f, 0x80);
+ }
+}
+
+static int adv7511_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl)
+{
+ switch (ctrl->val) {
+ default:
+ return -EINVAL;
+ break;
+ case V4L2_DV_RGB_RANGE_AUTO: {
+ /* automatic */
+ struct adv7511_state *state = get_adv7511_state(sd);
+
+ if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) {
+ /* cea format, RGB limited range (16-235) */
+ adv7511_csc_rgb_full2limit(sd, true);
+ } else {
+ /* not cea format, RGB full range (0-255) */
+ adv7511_csc_rgb_full2limit(sd, false);
+ }
+ }
+ break;
+ case V4L2_DV_RGB_RANGE_LIMITED:
+ /* RGB limited range (16-235) */
+ adv7511_csc_rgb_full2limit(sd, true);
+ break;
+ case V4L2_DV_RGB_RANGE_FULL:
+ /* RGB full range (0-255) */
+ adv7511_csc_rgb_full2limit(sd, false);
+ break;
+ }
+ return 0;
+}
+
+/* ------------------------------ CTRL OPS ------------------------------ */
+
+static int adv7511_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_subdev *sd = to_sd(ctrl);
+ struct adv7511_state *state = get_adv7511_state(sd);
+
+ v4l2_dbg(1, debug, sd, "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val);
+
+ if (state->hdmi_mode_ctrl == ctrl) {
+ /* Set HDMI or DVI-D */
+ adv7511_wr_and_or(sd, 0xaf, 0xfd, ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00);
+ return 0;
+ }
+ if (state->rgb_quantization_range_ctrl == ctrl)
+ return adv7511_set_rgb_quantization_mode(sd, ctrl);
+
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops adv7511_ctrl_ops = {
+ .s_ctrl = adv7511_s_ctrl,
+};
+
+/* ---------------------------- CORE OPS ------------------------------------------- */
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static void adv7511_inv_register(struct v4l2_subdev *sd)
+{
+ v4l2_info(sd, "0x000-0x0ff: Main Map\n");
+}
+
+static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+ reg->size = 1;
+ switch (reg->reg >> 8) {
+ case 0:
+ reg->val = adv7511_rd(sd, reg->reg & 0xff);
+ break;
+ default:
+ v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
+ adv7511_inv_register(sd);
+ break;
+ }
+ return 0;
+}
+
+static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
+{
+ switch (reg->reg >> 8) {
+ case 0:
+ adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ default:
+ v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
+ adv7511_inv_register(sd);
+ break;
+ }
+ return 0;
+}
+#endif
+
+static int adv7511_log_status(struct v4l2_subdev *sd)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ struct adv7511_state_edid *edid = &state->edid;
+
+ static const char * const states[] = {
+ "in reset",
+ "reading EDID",
+ "idle",
+ "initializing HDCP",
+ "HDCP enabled",
+ "initializing HDCP repeater",
+ "6", "7", "8", "9", "A", "B", "C", "D", "E", "F"
+ };
+ static const char * const errors[] = {
+ "no error",
+ "bad receiver BKSV",
+ "Ri mismatch",
+ "Pj mismatch",
+ "i2c error",
+ "timed out",
+ "max repeater cascade exceeded",
+ "hash check failed",
+ "too many devices",
+ "9", "A", "B", "C", "D", "E", "F"
+ };
+
+ v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off");
+ v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n",
+ (adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT) ? "detected" : "no",
+ (adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT) ? "detected" : "no",
+ edid->segments ? "found" : "no",
+ edid->blocks);
+ v4l2_info(sd, "%s output %s\n",
+ (adv7511_rd(sd, 0xaf) & 0x02) ?
+ "HDMI" : "DVI-D",
+ (adv7511_rd(sd, 0xa1) & 0x3c) ?
+ "disabled" : "enabled");
+ v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n",
+ states[adv7511_rd(sd, 0xc8) & 0xf],
+ errors[adv7511_rd(sd, 0xc8) >> 4], state->edid_detect_counter,
+ adv7511_rd(sd, 0x94), adv7511_rd(sd, 0x96));
+ v4l2_info(sd, "RGB quantization: %s range\n", adv7511_rd(sd, 0x18) & 0x80 ? "limited" : "full");
+ if (state->dv_timings.type == V4L2_DV_BT_656_1120)
+ v4l2_print_dv_timings(sd->name, "timings: ",
+ &state->dv_timings, false);
+ else
+ v4l2_info(sd, "no timings set\n");
+ v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr);
+ v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr);
+ return 0;
+}
+
+/* Power up/down adv7511 */
+static int adv7511_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ const int retries = 20;
+ int i;
+
+ v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off");
+
+ state->power_on = on;
+
+ if (!on) {
+ /* Power down */
+ adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40);
+ return true;
+ }
+
+ /* Power up */
+ /* The adv7511 does not always come up immediately.
+ Retry multiple times. */
+ for (i = 0; i < retries; i++) {
+ adv7511_wr_and_or(sd, 0x41, 0xbf, 0x0);
+ if ((adv7511_rd(sd, 0x41) & 0x40) == 0)
+ break;
+ adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40);
+ msleep(10);
+ }
+ if (i == retries) {
+ v4l2_dbg(1, debug, sd, "%s: failed to powerup the adv7511!\n", __func__);
+ adv7511_s_power(sd, 0);
+ return false;
+ }
+ if (i > 1)
+ v4l2_dbg(1, debug, sd, "%s: needed %d retries to powerup the adv7511\n", __func__, i);
+
+ /* Reserved registers that must be set */
+ adv7511_wr(sd, 0x98, 0x03);
+ adv7511_wr_and_or(sd, 0x9a, 0xfe, 0x70);
+ adv7511_wr(sd, 0x9c, 0x30);
+ adv7511_wr_and_or(sd, 0x9d, 0xfc, 0x01);
+ adv7511_wr(sd, 0xa2, 0xa4);
+ adv7511_wr(sd, 0xa3, 0xa4);
+ adv7511_wr(sd, 0xe0, 0xd0);
+ adv7511_wr(sd, 0xf9, 0x00);
+
+ adv7511_wr(sd, 0x43, state->i2c_edid_addr);
+
+ /* Set number of attempts to read the EDID */
+ adv7511_wr(sd, 0xc9, 0xf);
+ return true;
+}
+
+/* Enable interrupts */
+static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
+{
+ uint8_t irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT;
+ uint8_t irqs_rd;
+ int retries = 100;
+
+ v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable");
+
+ /* The datasheet says that the EDID ready interrupt should be
+ disabled if there is no hotplug. */
+ if (!enable)
+ irqs = 0;
+ else if (adv7511_have_hotplug(sd))
+ irqs |= MASK_ADV7511_EDID_RDY_INT;
+
+ /*
+ * This i2c write can fail (approx. 1 in 1000 writes). But it
+ * is essential that this register is correct, so retry it
+ * multiple times.
+ *
+ * Note that the i2c write does not report an error, but the readback
+ * clearly shows the wrong value.
+ */
+ do {
+ adv7511_wr(sd, 0x94, irqs);
+ irqs_rd = adv7511_rd(sd, 0x94);
+ } while (retries-- && irqs_rd != irqs);
+
+ if (irqs_rd == irqs)
+ return;
+ v4l2_err(sd, "Could not set interrupts: hw failure?\n");
+}
+
+/* Interrupt handler */
+static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
+{
+ uint8_t irq_status;
+
+ /* disable interrupts to prevent a race condition */
+ adv7511_set_isr(sd, false);
+ irq_status = adv7511_rd(sd, 0x96);
+ /* clear detected interrupts */
+ adv7511_wr(sd, 0x96, irq_status);
+
+ v4l2_dbg(1, debug, sd, "%s: irq 0x%x\n", __func__, irq_status);
+
+ if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT))
+ adv7511_check_monitor_present_status(sd);
+ if (irq_status & MASK_ADV7511_EDID_RDY_INT)
+ adv7511_check_edid_status(sd);
+
+ /* enable interrupts */
+ adv7511_set_isr(sd, true);
+
+ if (handled)
+ *handled = true;
+ return 0;
+}
+
+static int adv7511_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+
+ if (edid->pad != 0)
+ return -EINVAL;
+ if ((edid->blocks == 0) || (edid->blocks > 256))
+ return -EINVAL;
+ if (!edid->edid)
+ return -EINVAL;
+ if (!state->edid.segments) {
+ v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n");
+ return -ENODATA;
+ }
+ if (edid->start_block >= state->edid.segments * 2)
+ return -E2BIG;
+ if ((edid->blocks + edid->start_block) >= state->edid.segments * 2)
+ edid->blocks = state->edid.segments * 2 - edid->start_block;
+
+ memcpy(edid->edid, &state->edid.data[edid->start_block * 128],
+ 128 * edid->blocks);
+ return 0;
+}
+
+static const struct v4l2_subdev_pad_ops adv7511_pad_ops = {
+ .get_edid = adv7511_get_edid,
+};
+
+static const struct v4l2_subdev_core_ops adv7511_core_ops = {
+ .log_status = adv7511_log_status,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = adv7511_g_register,
+ .s_register = adv7511_s_register,
+#endif
+ .s_power = adv7511_s_power,
+ .interrupt_service_routine = adv7511_isr,
+};
+
+/* ------------------------------ VIDEO OPS ------------------------------ */
+
+/* Enable/disable adv7511 output */
+static int adv7511_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+
+ v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));
+ adv7511_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c));
+ if (enable) {
+ adv7511_check_monitor_present_status(sd);
+ } else {
+ adv7511_s_power(sd, 0);
+ state->have_monitor = false;
+ }
+ return 0;
+}
+
+static int adv7511_s_dv_timings(struct v4l2_subdev *sd,
+ struct v4l2_dv_timings *timings)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+
+ v4l2_dbg(1, debug, sd, "%s:\n", __func__);
+
+ /* quick sanity check */
+ if (!v4l2_valid_dv_timings(timings, &adv7511_timings_cap, NULL, NULL))
+ return -EINVAL;
+
+ /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
+ if the format is one of the CEA or DMT timings. */
+ v4l2_find_dv_timings_cap(timings, &adv7511_timings_cap, 0, NULL, NULL);
+
+ timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS;
+
+ /* save timings */
+ state->dv_timings = *timings;
+
+ /* update quantization range based on new dv_timings */
+ adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl);
+
+ /* update AVI infoframe */
+ adv7511_set_IT_content_AVI_InfoFrame(sd);
+
+ return 0;
+}
+
+static int adv7511_g_dv_timings(struct v4l2_subdev *sd,
+ struct v4l2_dv_timings *timings)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+
+ v4l2_dbg(1, debug, sd, "%s:\n", __func__);
+
+ if (!timings)
+ return -EINVAL;
+
+ *timings = state->dv_timings;
+
+ return 0;
+}
+
+static int adv7511_enum_dv_timings(struct v4l2_subdev *sd,
+ struct v4l2_enum_dv_timings *timings)
+{
+ return v4l2_enum_dv_timings_cap(timings, &adv7511_timings_cap, NULL, NULL);
+}
+
+static int adv7511_dv_timings_cap(struct v4l2_subdev *sd,
+ struct v4l2_dv_timings_cap *cap)
+{
+ *cap = adv7511_timings_cap;
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops adv7511_video_ops = {
+ .s_stream = adv7511_s_stream,
+ .s_dv_timings = adv7511_s_dv_timings,
+ .g_dv_timings = adv7511_g_dv_timings,
+ .enum_dv_timings = adv7511_enum_dv_timings,
+ .dv_timings_cap = adv7511_dv_timings_cap,
+};
+
+/* ------------------------------ AUDIO OPS ------------------------------ */
+static int adv7511_s_audio_stream(struct v4l2_subdev *sd, int enable)
+{
+ v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));
+
+ if (enable)
+ adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x80);
+ else
+ adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x40);
+
+ return 0;
+}
+
+static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
+{
+ u32 N;
+
+ switch (freq) {
+ case 32000: N = 4096; break;
+ case 44100: N = 6272; break;
+ case 48000: N = 6144; break;
+ case 88200: N = 12544; break;
+ case 96000: N = 12288; break;
+ case 176400: N = 25088; break;
+ case 192000: N = 24576; break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Set N (used with CTS to regenerate the audio clock) */
+ adv7511_wr(sd, 0x01, (N >> 16) & 0xf);
+ adv7511_wr(sd, 0x02, (N >> 8) & 0xff);
+ adv7511_wr(sd, 0x03, N & 0xff);
+
+ return 0;
+}
+
+static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq)
+{
+ u32 i2s_sf;
+
+ switch (freq) {
+ case 32000: i2s_sf = 0x30; break;
+ case 44100: i2s_sf = 0x00; break;
+ case 48000: i2s_sf = 0x20; break;
+ case 88200: i2s_sf = 0x80; break;
+ case 96000: i2s_sf = 0xa0; break;
+ case 176400: i2s_sf = 0xc0; break;
+ case 192000: i2s_sf = 0xe0; break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Set sampling frequency for I2S audio to 48 kHz */
+ adv7511_wr_and_or(sd, 0x15, 0xf, i2s_sf);
+
+ return 0;
+}
+
+static int adv7511_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config)
+{
+ /* Only 2 channels in use for application */
+ adv7511_wr_and_or(sd, 0x73, 0xf8, 0x1);
+ /* Speaker mapping */
+ adv7511_wr(sd, 0x76, 0x00);
+
+ /* 16 bit audio word length */
+ adv7511_wr_and_or(sd, 0x14, 0xf0, 0x02);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_audio_ops adv7511_audio_ops = {
+ .s_stream = adv7511_s_audio_stream,
+ .s_clock_freq = adv7511_s_clock_freq,
+ .s_i2s_clock_freq = adv7511_s_i2s_clock_freq,
+ .s_routing = adv7511_s_routing,
+};
+
+/* --------------------- SUBDEV OPS --------------------------------------- */
+
+static const struct v4l2_subdev_ops adv7511_ops = {
+ .core = &adv7511_core_ops,
+ .pad = &adv7511_pad_ops,
+ .video = &adv7511_video_ops,
+ .audio = &adv7511_audio_ops,
+};
+
+/* ----------------------------------------------------------------------- */
+static void adv7511_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, int segment, uint8_t *buf)
+{
+ if (debug >= lvl) {
+ int i, j;
+ v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment);
+ for (i = 0; i < 256; i += 16) {
+ u8 b[128];
+ u8 *bp = b;
+ if (i == 128)
+ v4l2_dbg(lvl, debug, sd, "\n");
+ for (j = i; j < i + 16; j++) {
+ sprintf(bp, "0x%02x, ", buf[j]);
+ bp += 6;
+ }
+ bp[0] = '\0';
+ v4l2_dbg(lvl, debug, sd, "%s\n", b);
+ }
+ }
+}
+
+static void adv7511_edid_handler(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler);
+ struct v4l2_subdev *sd = &state->sd;
+ struct adv7511_edid_detect ed;
+
+ v4l2_dbg(1, debug, sd, "%s:\n", __func__);
+
+ if (adv7511_check_edid_status(sd)) {
+ /* Return if we received the EDID. */
+ return;
+ }
+
+ if (adv7511_have_hotplug(sd)) {
+ /* We must retry reading the EDID several times, it is possible
+ * that initially the EDID couldn't be read due to i2c errors
+ * (DVI connectors are particularly prone to this problem). */
+ if (state->edid.read_retries) {
+ state->edid.read_retries--;
+ v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__);
+ state->have_monitor = false;
+ adv7511_s_power(sd, false);
+ adv7511_s_power(sd, true);
+ queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
+ return;
+ }
+ }
+
+ /* We failed to read the EDID, so send an event for this. */
+ ed.present = false;
+ ed.segment = adv7511_rd(sd, 0xc4);
+ v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+ v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
+}
+
+static void adv7511_audio_setup(struct v4l2_subdev *sd)
+{
+ v4l2_dbg(1, debug, sd, "%s\n", __func__);
+
+ adv7511_s_i2s_clock_freq(sd, 48000);
+ adv7511_s_clock_freq(sd, 48000);
+ adv7511_s_routing(sd, 0, 0, 0);
+}
+
+/* Configure hdmi transmitter. */
+static void adv7511_setup(struct v4l2_subdev *sd)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ v4l2_dbg(1, debug, sd, "%s\n", __func__);
+
+ /* Input format: RGB 4:4:4 */
+ adv7511_wr_and_or(sd, 0x15, 0xf0, 0x0);
+ /* Output format: RGB 4:4:4 */
+ adv7511_wr_and_or(sd, 0x16, 0x7f, 0x0);
+ /* 1st order interpolation 4:2:2 -> 4:4:4 up conversion, Aspect ratio: 16:9 */
+ adv7511_wr_and_or(sd, 0x17, 0xf9, 0x06);
+ /* Disable pixel repetition */
+ adv7511_wr_and_or(sd, 0x3b, 0x9f, 0x0);
+ /* Disable CSC */
+ adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0);
+ /* Output format: RGB 4:4:4, Active Format Information is valid,
+ * underscanned */
+ adv7511_wr_and_or(sd, 0x55, 0x9c, 0x12);
+ /* AVI Info frame packet enable, Audio Info frame disable */
+ adv7511_wr_and_or(sd, 0x44, 0xe7, 0x10);
+ /* Colorimetry, Active format aspect ratio: same as picure. */
+ adv7511_wr(sd, 0x56, 0xa8);
+ /* No encryption */
+ adv7511_wr_and_or(sd, 0xaf, 0xed, 0x0);
+
+ /* Positive clk edge capture for input video clock */
+ adv7511_wr_and_or(sd, 0xba, 0x1f, 0x60);
+
+ adv7511_audio_setup(sd);
+
+ v4l2_ctrl_handler_setup(&state->hdl);
+}
+
+static void adv7511_notify_monitor_detect(struct v4l2_subdev *sd)
+{
+ struct adv7511_monitor_detect mdt;
+ struct adv7511_state *state = get_adv7511_state(sd);
+
+ mdt.present = state->have_monitor;
+ v4l2_subdev_notify(sd, ADV7511_MONITOR_DETECT, (void *)&mdt);
+}
+
+static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ /* read hotplug and rx-sense state */
+ uint8_t status = adv7511_rd(sd, 0x42);
+
+ v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n",
+ __func__,
+ status,
+ status & MASK_ADV7511_HPD_DETECT ? ", hotplug" : "",
+ status & MASK_ADV7511_MSEN_DETECT ? ", rx-sense" : "");
+
+ /* update read only ctrls */
+ v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0);
+ v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0);
+ v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
+
+ if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) {
+ v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__);
+ if (!state->have_monitor) {
+ v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__);
+ state->have_monitor = true;
+ adv7511_set_isr(sd, true);
+ if (!adv7511_s_power(sd, true)) {
+ v4l2_dbg(1, debug, sd, "%s: monitor detected, powerup failed\n", __func__);
+ return;
+ }
+ adv7511_setup(sd);
+ adv7511_notify_monitor_detect(sd);
+ state->edid.read_retries = EDID_MAX_RETRIES;
+ queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
+ }
+ } else if (status & MASK_ADV7511_HPD_DETECT) {
+ v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__);
+ state->edid.read_retries = EDID_MAX_RETRIES;
+ queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
+ } else if (!(status & MASK_ADV7511_HPD_DETECT)) {
+ v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__);
+ if (state->have_monitor) {
+ v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__);
+ state->have_monitor = false;
+ adv7511_notify_monitor_detect(sd);
+ }
+ adv7511_s_power(sd, false);
+ memset(&state->edid, 0, sizeof(struct adv7511_state_edid));
+ }
+}
+
+static bool edid_block_verify_crc(uint8_t *edid_block)
+{
+ int i;
+ uint8_t sum = 0;
+
+ for (i = 0; i < 128; i++)
+ sum += *(edid_block + i);
+ return (sum == 0);
+}
+
+static bool edid_segment_verify_crc(struct v4l2_subdev *sd, u32 segment)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ u32 blocks = state->edid.blocks;
+ uint8_t *data = state->edid.data;
+
+ if (edid_block_verify_crc(&data[segment * 256])) {
+ if ((segment + 1) * 2 <= blocks)
+ return edid_block_verify_crc(&data[segment * 256 + 128]);
+ return true;
+ }
+ return false;
+}
+
+static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ uint8_t edidRdy = adv7511_rd(sd, 0xc5);
+
+ v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n",
+ __func__, EDID_MAX_RETRIES - state->edid.read_retries);
+
+ if (state->edid.complete)
+ return true;
+
+ if (edidRdy & MASK_ADV7511_EDID_RDY) {
+ int segment = adv7511_rd(sd, 0xc4);
+ struct adv7511_edid_detect ed;
+
+ if (segment >= EDID_MAX_SEGM) {
+ v4l2_err(sd, "edid segment number too big\n");
+ return false;
+ }
+ v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment);
+ adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]);
+ adv7511_dbg_dump_edid(2, debug, sd, segment, &state->edid.data[segment * 256]);
+ if (segment == 0) {
+ state->edid.blocks = state->edid.data[0x7e] + 1;
+ v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", __func__, state->edid.blocks);
+ }
+ if (!edid_segment_verify_crc(sd, segment)) {
+ /* edid crc error, force reread of edid segment */
+ v4l2_dbg(1, debug, sd, "%s: edid crc error\n", __func__);
+ state->have_monitor = false;
+ adv7511_s_power(sd, false);
+ adv7511_s_power(sd, true);
+ return false;
+ }
+ /* one more segment read ok */
+ state->edid.segments = segment + 1;
+ if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) {
+ /* Request next EDID segment */
+ v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments);
+ adv7511_wr(sd, 0xc9, 0xf);
+ adv7511_wr(sd, 0xc4, state->edid.segments);
+ state->edid.read_retries = EDID_MAX_RETRIES;
+ queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
+ return false;
+ }
+
+ v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments);
+ state->edid.complete = true;
+
+ /* report when we have all segments
+ but report only for segment 0
+ */
+ ed.present = true;
+ ed.segment = 0;
+ state->edid_detect_counter++;
+ v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
+ v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+ return ed.present;
+ }
+
+ return false;
+}
+
+/* ----------------------------------------------------------------------- */
+/* Setup ADV7511 */
+static void adv7511_init_setup(struct v4l2_subdev *sd)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ struct adv7511_state_edid *edid = &state->edid;
+
+ v4l2_dbg(1, debug, sd, "%s\n", __func__);
+
+ /* clear all interrupts */
+ adv7511_wr(sd, 0x96, 0xff);
+ memset(edid, 0, sizeof(struct adv7511_state_edid));
+ state->have_monitor = false;
+ adv7511_set_isr(sd, false);
+ adv7511_s_stream(sd, false);
+ adv7511_s_audio_stream(sd, false);
+}
+
+static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct adv7511_state *state;
+ struct adv7511_platform_data *pdata = client->dev.platform_data;
+ struct v4l2_ctrl_handler *hdl;
+ struct v4l2_subdev *sd;
+ u8 chip_id[2];
+ int err = -EIO;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ state = devm_kzalloc(&client->dev, sizeof(struct adv7511_state), GFP_KERNEL);
+ if (!state)
+ return -ENOMEM;
+
+ /* Platform data */
+ if (!pdata) {
+ v4l_err(client, "No platform data!\n");
+ return -ENODEV;
+ }
+ memcpy(&state->pdata, pdata, sizeof(state->pdata));
+
+ sd = &state->sd;
+
+ v4l2_dbg(1, debug, sd, "detecting adv7511 client on address 0x%x\n",
+ client->addr << 1);
+
+ v4l2_i2c_subdev_init(sd, client, &adv7511_ops);
+
+ hdl = &state->hdl;
+ v4l2_ctrl_handler_init(hdl, 10);
+ /* add in ascending ID order */
+ state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops,
+ V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI,
+ 0, V4L2_DV_TX_MODE_DVI_D);
+ state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL,
+ V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0);
+ state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL,
+ V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0);
+ state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL,
+ V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0);
+ state->rgb_quantization_range_ctrl =
+ v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops,
+ V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
+ 0, V4L2_DV_RGB_RANGE_AUTO);
+ sd->ctrl_handler = hdl;
+ if (hdl->error) {
+ err = hdl->error;
+ goto err_hdl;
+ }
+ state->pad.flags = MEDIA_PAD_FL_SINK;
+ err = media_entity_init(&sd->entity, 1, &state->pad, 0);
+ if (err)
+ goto err_hdl;
+
+ /* EDID and CEC i2c addr */
+ state->i2c_edid_addr = state->pdata.i2c_edid << 1;
+ state->i2c_cec_addr = state->pdata.i2c_cec << 1;
+
+ state->chip_revision = adv7511_rd(sd, 0x0);
+ chip_id[0] = adv7511_rd(sd, 0xf5);
+ chip_id[1] = adv7511_rd(sd, 0xf6);
+ if (chip_id[0] != 0x75 || chip_id[1] != 0x11) {
+ v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], chip_id[1]);
+ err = -EIO;
+ goto err_entity;
+ }
+
+ state->i2c_edid = i2c_new_dummy(client->adapter, state->i2c_edid_addr >> 1);
+ if (state->i2c_edid == NULL) {
+ v4l2_err(sd, "failed to register edid i2c client\n");
+ goto err_entity;
+ }
+
+ adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */
+ state->work_queue = create_singlethread_workqueue(sd->name);
+ if (state->work_queue == NULL) {
+ v4l2_err(sd, "could not create workqueue\n");
+ goto err_unreg_cec;
+ }
+
+ INIT_DELAYED_WORK(&state->edid_handler, adv7511_edid_handler);
+
+ adv7511_init_setup(sd);
+ adv7511_set_isr(sd, true);
+ adv7511_check_monitor_present_status(sd);
+
+ v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
+ client->addr << 1, client->adapter->name);
+ return 0;
+
+err_unreg_cec:
+ i2c_unregister_device(state->i2c_edid);
+err_entity:
+ media_entity_cleanup(&sd->entity);
+err_hdl:
+ v4l2_ctrl_handler_free(&state->hdl);
+ return err;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int adv7511_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct adv7511_state *state = get_adv7511_state(sd);
+
+ state->chip_revision = -1;
+
+ v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name,
+ client->addr << 1, client->adapter->name);
+
+ adv7511_init_setup(sd);
+ cancel_delayed_work(&state->edid_handler);
+ i2c_unregister_device(state->i2c_edid);
+ destroy_workqueue(state->work_queue);
+ v4l2_device_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_device_id adv7511_id[] = {
+ { "adv7511", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adv7511_id);
+
+static struct i2c_driver adv7511_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "adv7511",
+ },
+ .probe = adv7511_probe,
+ .remove = adv7511_remove,
+ .id_table = adv7511_id,
+};
+
+module_i2c_driver(adv7511_driver);
diff --git a/include/media/adv7511.h b/include/media/adv7511.h
new file mode 100644
index 0000000..2f506d9
--- /dev/null
+++ b/include/media/adv7511.h
@@ -0,0 +1,49 @@
+/*
+ * Analog Devices ADV7511 HDMI Transmitter Device Driver
+ *
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef ADV7511_H
+#define ADV7511_H
+
+/* notify events */
+#define ADV7511_MONITOR_DETECT 0
+#define ADV7511_EDID_DETECT 1
+
+
+struct adv7511_monitor_detect {
+ int present;
+};
+
+struct adv7511_edid_detect {
+ int present;
+ int segment;
+};
+
+struct adv7511_cec_arg {
+ void *arg;
+ u32 f_flags;
+};
+
+struct adv7511_platform_data {
+ uint8_t i2c_edid;
+ uint8_t i2c_cec;
+ uint32_t cec_clk;
+};
+
+#endif
+
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
