> +
> +static int adv7842_g_mbus_fmt(struct v4l2_subdev *sd,
> + struct v4l2_mbus_framefmt *fmt)
> +{
> + struct adv7842_state *state = to_state(sd);
> +
> + fmt->width = state->timings.bt.width;
> + fmt->height = state->timings.bt.height;
> + fmt->code = V4L2_MBUS_FMT_FIXED;
> + fmt->field = V4L2_FIELD_NONE;
> +
> + if (state->mode == ADV7842_MODE_SDP) {
> + /* SPD block */
> + if (!(sdp_read(sd, 0x5A) & 0x01))
> + return -EINVAL;
> + fmt->width = 720;
> + /* valid signal */
> + if (state->norm & V4L2_STD_525_60)
> + fmt->height = 480;
> + else
> + fmt->height = 576;
> + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
> + return 0;
> + }
> +
I believe someone use SDP mode to capture 480i instead of 480p.
I think we can add a table to map adv7842 output setting and v4l format.
> +static int adv7842_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
> +{
> + struct adv7842_state *state = to_state(sd);
> +
> + v4l2_dbg(1, debug, sd, "%s:\n", __func__);
> +
> + if (state->mode != ADV7842_MODE_SDP)
> + return -ENODATA;
> +
> + if (norm & V4L2_STD_ALL) {
> + state->norm = norm;
> + return 0;
> + }
> + return -EINVAL;
> +}
Why is there no hardware operation?
if (std == V4L2_STD_NTSC_443)
val = 0x20;
else if (std == V4L2_STD_PAL_60)
val = 0x10;
else if (std == V4L2_STD_PAL_Nc)
val = 0x08;
else if (std == V4L2_STD_PAL_M)
val = 0x04;
else if (std & V4L2_STD_NTSC)
val = 0x02;
else if (std & V4L2_STD_PAL)
val = 0x01;
else if (std & V4L2_STD_SECAM)
val = 0x40;
else
return -EINVAL;
/* force the digital core into a specific video standard */
sdp_write(sd, 0x0, val);
/* wait 100ms, otherwise color will be lost */
msleep(100);
state->std = std;
return 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
