OK, with the patched fex file and devices.c from [linux-sunxi] [PATCH v2 1/1] [sunxi-boards/a20] Add support for Allwinner (DVB/ATSC) Transport Stream Controller(s) (TSC) [PATCH v2 1/1] [stage/sunxi-3.4] sw_nand: sunxi devices core using wrong MMIO region range, overlaps TSC/TSI register base address 0x01c04000 and the driver patches from this topic here the driver basically loads and inits: [ 161.016837] [tsc-inf] tscdev_init: kmalloc memory, size: 0x212000 [ 161.042378] [tsc-dbg] register_tsiomem: check_mem_region return: 0 [ 161.055409] [tsc-dbg] register_tsiomem: devp->regsaddr: 0xf0104000 root@vdr2:~# cat /proc/iomem |grep -C 1 -i ts 01c03000-01c03fff : sw_nand 01c04000-01c04fff : ts regs 01c0a000-01c0afff : disp root@vdr2:~# ls -l /dev/ts* crw------- 1 root root 225, 0 Aug 14 19:10 /dev/tsc_dev And ioctl() triggers the controller setup successfully. root@vdr2:~# dd if=/dev/tsc_dev of=/dev/null bs=1K count=100 & [ 1064.861178] [tsc-inf] tscdev_open: ahb_ts clk rate: 0x1 [ 1064.871506] [tsc-inf] tscdev_open: parent clock rate 384000000 [ 1064.881674] [tsc-inf] tscdev_open: clock rate 192000000 [ 1064.891079] [tsc-inf] tscdev_open: clock rate 192000000 Ready to build the Philips CU1216-MKIII TDA10023 DVB-C- Receiver "recycling" SMT extension board next days. Others are invited to build boards with their receiver modules and extend driver Kconfig for more receivers, too. Next i2c and frontend driver integration, if someone can do that faster, pls don't wait for me and pls CC linux-media list. dvb_core integration after the hardware and driver PIO tests success. Thanks for all the great community support :-) y tom -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
