Em Thu, 08 Aug 2013 21:00:30 -0300 Alfredo Jesús Delaiti <alfredodelaiti@xxxxxxxxxxxx> escreveu: > Hi > > > El 08/08/13 13:51, Mauro Carvalho Chehab escribió: > > This is a first set of experimental patches for Mygica X8502/X8507. > > > > The last patch is just a very dirty hack, for testing purposes. I intend > > to get rid of it, but it is there to replace exactly the same changes that > > Alfredo reported to work on Kernel 3.2. > > > > I intend to remove it on a final series, eventually replacing by some > > other changes at mb86a20s. > > > > Alfredo, > > > > Please test, and send your tested-by, if this works for you. > > tested-by: Alfredo Delaiti <alfredodelaiti@xxxxxxxxxxxx> > > > > two comments: > > two "breaks": > > @@ -1106,6 +1112,8 @@ static int dvb_register(struct cx23885_tsport *port) > &i2c_bus2->i2c_adap, > &mygica_x8506_xc5000_config); > } > + cx23885_set_frontend_hook(port, fe0->dvb.frontend); > + break; > break; > > > and I would add this on cx23885-cards.c (is not a patch): > > case CX23885_BOARD_MYGICA_X8506: > case CX23885_BOARD_MAGICPRO_PROHDTVE2: > case CX23885_BOARD_MYGICA_X8507: > /* GPIO-0 (0)Analog / (1)Digital TV */ > /* GPIO-1 reset XC5000 */ > - /* GPIO-2 reset LGS8GL5 / LGS8G75 */ > + /* GPIO-2 reset LGS8GL5 / LGS8G75 / MB86A20S */ > cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1); > cx23885_gpio_clear(dev, GPIO_1 | GPIO_2); > mdelay(100); > cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2); > mdelay(100); > break; > > > Thanks again Mauro, Thank you for your tests. I just pushed a new patch series addressing the above, and getting rid of the horrible mb86a20s hack. Please test it again, to see if the mb86a20s fixes also worked for you. Thanks! Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
