On 08/07/2013 11:03 AM, Arun Kumar K wrote:
From: Shaik Ameer Basha<shaik.ameer@xxxxxxxxxxx>
This patch adds support for media device for EXYNOS5 SoCs.
The current media device supports the following ips to connect
through the media controller framework.
* MIPI-CSIS
Support interconnection(subdev interface) between devices
* FIMC-LITE
Support capture interface from device(Sensor, MIPI-CSIS) to memory
Support interconnection(subdev interface) between devices
* FIMC-IS
Camera post-processing IP having multiple sub-nodes.
G-Scaler will be added later to the current media device.
The media device creates two kinds of pipelines for connecting
the above mentioned IPs.
The pipeline0 is uses Sensor, MIPI-CSIS and FIMC-LITE which captures
image data and dumps to memory.
Pipeline1 uses FIMC-IS components for doing post-processing
operations on the captured image and give scaled YUV output.
Pipeline0
+--------+ +-----------+ +-----------+ +--------+
| Sensor | --> | MIPI-CSIS | --> | FIMC-LITE | --> | Memory |
+--------+ +-----------+ +-----------+ +--------+
Pipeline1
+--------+ +--------+ +-----------+ +-----------+
| Memory | --> | ISP | --> | SCC | --> | SCP |
+--------+ +--------+ +-----------+ +-----------+
Signed-off-by: Shaik Ameer Basha<shaik.ameer@xxxxxxxxxxx>
Signed-off-by: Arun Kumar K<arun.kk@xxxxxxxxxxx>
---
.../devicetree/bindings/media/exynos5-mdev.txt | 148 +++
drivers/media/platform/exynos5-is/exynos5-mdev.c | 1189 ++++++++++++++++++++
drivers/media/platform/exynos5-is/exynos5-mdev.h | 164 +++
3 files changed, 1501 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/exynos5-mdev.txt
create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.c
create mode 100644 drivers/media/platform/exynos5-is/exynos5-mdev.h
diff --git a/Documentation/devicetree/bindings/media/exynos5-mdev.txt b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
new file mode 100644
index 0000000..8b2ffb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos5-mdev.txt
@@ -0,0 +1,148 @@
+Samsung EXYNOS5 SoC Camera Subsystem
+------------------------------------
+
+The Exynos5 SoC Camera subsystem comprises of multiple sub-devices
+represented by separate device tree nodes. Currently this includes: FIMC-LITE,
+MIPI CSIS and FIMC-IS.
+
+The sub-subdevices are defined as child nodes of the common 'camera' node which
+also includes common properties of the whole subsystem not really specific to
+any single sub-device, like common camera port pins or the CAMCLK clock outputs
+for external image sensors attached to an SoC.
+
+Common 'camera' node
+--------------------
+
+Required properties:
+
+- compatible : must be "samsung,exynos5-fimc", "simple-bus"
+- clocks : list of clock specifiers, corresponding to entries in
+ the clock-names property;
+- clock-names : must contain "sclk_bayer" entry and matching clock property
+ entry
I guess "and matching clock property entry" could be removed.
+The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
+to define a required pinctrl state named "default" and optional pinctrl states:
How about only supporting "default" pinctrl state in this initial DT
binding/driver
version ? The optional states could be added later, my concern is that
except the
camera port A, B there is also the RGB camera bay. Thus using "idle",
"active-a",
active-b" won't work any more. We need to find some better solution for
that.
Besides now when you removed the clock provider, there is not much you
could do
with those optional pinctrl states. Those were originally meant to be
used in
the clk_prepare/clk_unprepare ops. So, e.g. when sensor disables the
clock the
host driver sets a clock output pin into idle state, e.g. input with
pull down.
But maybe Exynos5 SoCs got improved comparing to e.g. Exynos4 so the
clock output
pin is put into high impedance state when the sclk_cam clock is disabled ?
However that seems unlikely.
+"idle", "active-a", active-b". These optional states can be used to switch the
+camera port pinmux at runtime. The "idle" state should configure both the camera
+ports A and B into high impedance state, especially the CAMCLK clock output
+should be inactive. For the "active-a" state the camera port A must be activated
+and the port B deactivated and for the state "active-b" it should be the other
+way around.
+
+The 'camera' node must include at least one 'fimc-lite' child node.
This shouldn't be necessary, i.e. making the individual device nodes
child nodes
of the camera node. Think of GScaler which can be used either by the
camera or
the display/HDMI subsystem. Although csis and fimc-lite are purely
camera specific
I'm inclined to move them out of the camera node and couple them with
this node
either manually through 'compatible' values or explicitly through phandles.
+'parallel-ports' node
+---------------------
+
+This node should contain child 'port' nodes specifying active parallel video
+input ports. It includes camera A and camera B inputs. 'reg' property in the
I suppose the RGB camera bay needs to be also listed here. It could be
added
later but might be more reasonable to add it now, e.g.
1 - parallel camport A
2 - parallel camport B
3 - serial MIPI CSI-2 port 0
4 - serial MIPI CSI-2 port 1
5 - RGB camera bay
3, 4 are already described in samsung-mipi-csis.txt.
+port nodes specifies data input - 0, 1 indicates input A, B respectively.
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added to their control bus controller (e.g.
+I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
+using the common video interfaces bindings, defined in video-interfaces.txt.
+The implementation of this bindings requires clock-frequency property to be
+present in the sensor device nodes.
+
+Example:
+
+ aliases {
+ fimc-lite0 =&fimc_lite_0
+ };
[...]
+ camera {
+ compatible = "samsung,exynos5-fimc", "simple-bus";
+ #address-cells =<1>;
+ #size-cells =<1>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 =<&cam_port_a_clk_active>;
+
+ /* parallel camera ports */
+ parallel-ports {
+ /* camera A input */
+ port@0 {
+ reg =<0>;
+ fimc0_ep: endpoint {
+ remote-endpoint =<&s5k6aa_ep>;
+ bus-width =<8>;
+ hsync-active =<0>;
+ vsync-active =<1>;
+ pclk-sample =<1>;
+ };
+ };
+ };
+
+ fimc_lite_0: fimc-lite@13C00000 {
+ compatible = "samsung,exynos5250-fimc-lite";
+ reg =<0x13C00000 0x1000>;
+ interrupts =<0 126 0>;
+ clocks =<&clock 129>;
+ clock-names = "flite";
+ status = "okay";
+ };
+
+ csis_0: csis@11880000 {
+ compatible = "samsung,exynos4210-csis";
+ reg =<0x11880000 0x1000>;
+ interrupts =<0 78 0>;
+ /* camera C input */
+ port@3 {
+ reg =<3>;
+ csis0_ep: endpoint {
+ remote-endpoint =<&s5c73m3_ep>;
+ data-lanes =<1 2 3 4>;
+ samsung,csis-hs-settle =<12>;
+ };
+ };
+ };
+ };
+
+MIPI-CSIS device binding is defined in samsung-mipi-csis.txt and FIMC-LITE
+device binding is defined in exynos-fimc-lite.txt.
diff --git a/drivers/media/platform/exynos5-is/exynos5-mdev.c b/drivers/media/platform/exynos5-is/exynos5-mdev.c
new file mode 100644
index 0000000..4cef69e
--- /dev/null
+++ b/drivers/media/platform/exynos5-is/exynos5-mdev.c
@@ -0,0 +1,1189 @@
[...]
+/* Register FIMC, FIMC-LITE and CSIS media entities */
+static int fimc_md_register_of_platform_entities(struct fimc_md *fmd,
+ struct device_node *parent)
+{
+ struct device_node *node;
+ int ret = 0;
+
+ for_each_available_child_of_node(parent, node) {
+ struct platform_device *pdev;
+ int plat_entity = -1;
+
+ pdev = of_find_device_by_node(node);
+ if (!pdev)
+ continue;
+
+ /* If driver of any entity isn't ready try all again later. */
+ if (!strcmp(node->name, CSIS_OF_NODE_NAME))
+ plat_entity = IDX_CSIS;
+ else if (!strcmp(node->name, FIMC_LITE_OF_NODE_NAME))
+ plat_entity = IDX_FLITE;
+ else if (!strcmp(node->name, FIMC_IS_OF_NODE_NAME))
+ plat_entity = IDX_FIMC_IS;
And that needs to be replaced with something else, e.g. phandles or
searching
with compatible value as the key. The former will be of course less
efficient.
By the time I wrote similar code for Exynos4 I wasn't really aware the
device
node names should not have semantic meaning.
+ if (plat_entity>= 0)
+ ret = fimc_md_register_platform_entity(fmd, pdev,
+ plat_entity);
+ put_device(&pdev->dev);
+ if (ret< 0)
+ break;
+ }
+
+ return ret;
+}
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
