Hi again Mauro, reverting both commits: * 59501bb792c66b85fb7fdbd740e788e3afc70bbd * f45f513a9325b52a5f3e26ee8d15471e8b692947 The problem still exists, I am unable to get any result, and also no error logs) :( What shall I do to try to fix this ? Do you need more info on my current setup. Thanks in advance and best regards... On Mon, Aug 5, 2013 at 5:26 PM, Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx> wrote: > Em Mon, 05 Aug 2013 16:09:56 -0300 > Luis Polasek <lpolasek@xxxxxxxxx> escreveu: > >> Hi Mauro, I have tested using dvb5-scan, and the results are the same (no >> results, and no error logs) :( >> >> Do you have any clue why it is not working with this kernel version ? > > c/c Oliver and Patrick, who maintains this driver > > There were a recent change on this driver, in order to support some newer > versions of this chipset. Perhaps those changes broke it for you. > > commit 59501bb792c66b85fb7fdbd740e788e3afc70bbd > Author: Olivier Grenie <olivier.grenie@xxxxxxxxxx> > Date: Mon Dec 31 09:51:17 2012 -0300 > > [media] dib7090p: improve the support of the dib7090 and dib7790 > > The intend of this patch is to improve the support of the dib7090 and > dib7790. The AGC1 min value is set to 32768 by default. The actual AGC1 min > and the external attenuation are controled depending on the received RF > level. > > Signed-off-by: Olivier Grenie <olivier.grenie@xxxxxxxxxx> > Signed-off-by: Patrick Boettcher <patrick.boettcher@xxxxxxxxxx> > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> > > commit f45f513a9325b52a5f3e26ee8d15471e8b692947 > Author: Olivier Grenie <olivier.grenie@xxxxxxxxxx> > Date: Mon Dec 31 09:47:10 2012 -0300 > > [media] dib7090p: remove the support for the dib7090E > > The intend of this patch is to remove the support for the dib7090E. The > DiB7090E-package has never left prototype state and never made it to > mass-prod-state. > > Signed-off-by: Olivier Grenie <olivier.grenie@xxxxxxxxxx> > Signed-off-by: Patrick Boettcher <patrick.boettcher@xxxxxxxxxx> > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> > > Could you please revert those patches and see if they fix the issue? > Please try to revert this one first: > http://git.linuxtv.org/media_tree.git/commitdiff_plain/59501bb792c66b85fb7fdbd740e788e3afc70bbd > > If this doesn't solve, try to revert just this one: > http://git.linuxtv.org/media_tree.git/commitdiff_plain/f45f513a9325b52a5f3e26ee8d15471e8b692947 > > then, try to revert both. > > AFAIKT, those are the only changes that may be affecting isdb-t on dib8000 > driver. > > Thanks! > Mauro > >> >> Thanks and regards... >> >> >> On Thu, Aug 1, 2013 at 2:15 PM, Mauro Carvalho Chehab >> <m.chehab@xxxxxxxxxxx>wrote: >> >> > Em Thu, 1 Aug 2013 13:36:25 -0300 >> > Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx> escreveu: >> > >> > > Hi Luis, >> > > >> > > (I'm Ccing Mauro, who mantains this driver and might know what's going >> > on). >> > > >> > > On Wed, Jul 31, 2013 at 03:47:10PM -0300, Luis Polasek wrote: >> > > > Hi, I just upgraded my kernel to 3.10.3, and dib8000 scanning does not >> > > > work anymore. >> > > > >> > > > I tested using dvbscan (from dvb-apps/util/) and w_scan on a Prolink >> > > > Pixelview SBTVD (dib8000 module*).This tools worked very well on >> > > > version 3.9.9 , but now it does not produces any result, and also >> > > > there are no error messages in the logs (dmesg). >> > > > >> > > >> > > Please run a git bisect and report your findings. >> > > >> > > Note that dibcom8000 shows just a handful of commit on 2013, >> > > so you could start reverting those and see what happens. >> > >> > Perhaps it is a failure at the DVBv3 emulation. >> > >> > Did it also break using dvbv5-scan (part of v4l-utils)? >> > >> > Regards, >> > Mauro >> > -- >> > >> > Cheers, >> > Mauro >> > > > > -- > > Cheers, > Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
