Hi Laurent,
On 07/05/2013 12:55 PM, Laurent Pinchart wrote:
Configure the device external clock using the common clock framework
instead of a board code callback function.
Signed-off-by: Laurent Pinchart<laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/mt9v032.c | 16 ++++++++++------
include/media/mt9v032.h | 4 ----
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c
index 60c6f67..7b30640 100644
--- a/drivers/media/i2c/mt9v032.c
+++ b/drivers/media/i2c/mt9v032.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
+#include<linux/clk.h>
#include<linux/delay.h>
#include<linux/i2c.h>
#include<linux/log2.h>
@@ -135,6 +136,8 @@ struct mt9v032 {
struct mutex power_lock;
int power_count;
+ struct clk *clk;
+
struct mt9v032_platform_data *pdata;
u32 sysclk;
@@ -219,10 +222,8 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032)
struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev);
int ret;
- if (mt9v032->pdata->set_clock) {
- mt9v032->pdata->set_clock(&mt9v032->subdev, mt9v032->sysclk);
- udelay(1);
- }
+ clk_prepare_enable(mt9v032->clk);
+ udelay(1);
/* Reset the chip and stop data read out */
ret = mt9v032_write(client, MT9V032_RESET, 1);
@@ -238,8 +239,7 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032)
static void mt9v032_power_off(struct mt9v032 *mt9v032)
{
- if (mt9v032->pdata->set_clock)
- mt9v032->pdata->set_clock(&mt9v032->subdev, 0);
+ clk_disable_unprepare(mt9v032->clk);
}
static int __mt9v032_set_power(struct mt9v032 *mt9v032, bool on)
@@ -748,6 +748,10 @@ static int mt9v032_probe(struct i2c_client *client,
if (!mt9v032)
return -ENOMEM;
+ mt9v032->clk = devm_clk_get(&client->dev, NULL);
+ if (IS_ERR(mt9v032->clk))
+ return PTR_ERR(mt9v032->clk);
+
mutex_init(&mt9v032->power_lock);
mt9v032->pdata = pdata;
diff --git a/include/media/mt9v032.h b/include/media/mt9v032.h
index 78fd39e..12175a6 100644
--- a/include/media/mt9v032.h
+++ b/include/media/mt9v032.h
@@ -1,13 +1,9 @@
#ifndef _MEDIA_MT9V032_H
#define _MEDIA_MT9V032_H
-struct v4l2_subdev;
-
struct mt9v032_platform_data {
unsigned int clk_pol:1;
- void (*set_clock)(struct v4l2_subdev *subdev, unsigned int rate);
-
const s64 *link_freqs;
s64 link_def_freq;
};
Is there clk_put() somewhere in this patch ? I would expect it somewhere
around driver remove() callback, but can't see it. :-/
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
