Re: [PATCH v4] media: i2c: tvp7002: add OF support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

On 07/18/2013 05:54 PM, Lad, Prabhakar wrote:
> From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
> 
> add OF support for the tvp7002 driver.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> ---
>  This patch depends on https://patchwork.kernel.org/patch/2828800/
>  
>  Changes for v4:
>  1: Improved descrition of end point properties.
> 
>  Changes for v3:
>  1: Fixed review comments pointed by Sylwester.
> 
>  .../devicetree/bindings/media/i2c/tvp7002.txt      |   53 ++++++++++++++++
>  drivers/media/i2c/tvp7002.c                        |   67 ++++++++++++++++++--
>  2 files changed, 113 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp7002.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
> new file mode 100644
> index 0000000..1d00935
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
> @@ -0,0 +1,53 @@
> +* Texas Instruments TV7002 video decoder
> +
> +The TVP7002 device supports digitizing of video and graphics signal in RGB and
> +YPbPr color space.
> +
> +Required Properties :
> +- compatible : Must be "ti,tvp7002"
> +
> +Optional Properties:
> +- hsync-active: HSYNC Polarity configuration for the bus. Default value when
> +  this property is not specified is <0>.
> +
> +- vsync-active: VSYNC Polarity configuration for the bus. Default value when
> +  this property is not specified is <0>.
> +
> +- pclk-sample: Clock polarity of the bus. Default value when this property is
> +  not specified is <0>.
> +
> +- sync-on-green-active: Active state of Sync-on-green signal property of the
> +  endpoint.
> +  0 = Normal Operation (Default)

I would extend this a little bit:

  0 = Normal Operation (Active Low, Default)

> +  1 = Inverted operation
> +
> +- field-even-active: Active-high Field ID output polarity control of the bus.
> +  Under normal operation, the field ID output is set to logic 1 for an odd field
> +  (field 1)and set to logic 0 for an even field (field 0).

Add space before 'and'.

> +  0 = Normal operation (default)
> +  1 = FID output polarity inverted
> +
> +For further reading of port node refer Documentation/devicetree/bindings/media/
> +video-interfaces.txt.
> +
> +Example:
> +
> +	i2c0@1c22000 {
> +		...
> +		...
> +		tvp7002@5c {
> +			compatible = "ti,tvp7002";
> +			reg = <0x5c>;
> +
> +			port {
> +				tvp7002_1: endpoint {
> +					hsync-active = <1>;
> +					vsync-active = <1>;
> +					pclk-sample = <0>;
> +					sync-on-green-active = <1>;
> +					field-even-active = <0>;
> +				};
> +			};
> +		};
> +		...
> +	};
> diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c
> index f6b1f3f..24a08fa 100644
> --- a/drivers/media/i2c/tvp7002.c
> +++ b/drivers/media/i2c/tvp7002.c
> @@ -35,6 +35,8 @@
>  #include <media/v4l2-device.h>
>  #include <media/v4l2-common.h>
>  #include <media/v4l2-ctrls.h>
> +#include <media/v4l2-of.h>
> +
>  #include "tvp7002_reg.h"
>  
>  MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver");
> @@ -943,6 +945,48 @@ static const struct v4l2_subdev_ops tvp7002_ops = {
>  	.pad = &tvp7002_pad_ops,
>  };
>  
> +static struct tvp7002_config *
> +tvp7002_get_pdata(struct i2c_client *client)
> +{
> +	struct v4l2_of_endpoint bus_cfg;
> +	struct tvp7002_config *pdata;
> +	struct device_node *endpoint;
> +	unsigned int flags;
> +
> +	if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
> +		return client->dev.platform_data;
> +
> +	endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
> +	if (!endpoint)
> +		return NULL;
> +
> +	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		goto done;
> +
> +	v4l2_of_parse_endpoint(endpoint, &bus_cfg);
> +	flags = bus_cfg.bus.parallel.flags;
> +
> +	if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> +		pdata->hs_polarity = 1;
> +
> +	if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> +		pdata->vs_polarity = 1;
> +
> +	if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> +		pdata->clk_polarity = 1;
> +
> +	if (flags & V4L2_MBUS_FIELD_EVEN_HIGH)
> +		pdata->fid_polarity = 1;
> +
> +	if (flags & V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH)
> +		pdata->sog_polarity = 1;
> +
> +done:
> +	of_node_put(endpoint);
> +	return pdata;
> +}
> +
>  /*
>   * tvp7002_probe - Probe a TVP7002 device
>   * @c: ptr to i2c_client struct
> @@ -954,32 +998,32 @@ static const struct v4l2_subdev_ops tvp7002_ops = {
>   */
>  static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id)
>  {
> +	struct tvp7002_config *pdata = tvp7002_get_pdata(c);
>  	struct v4l2_subdev *sd;
>  	struct tvp7002 *device;
>  	struct v4l2_dv_timings timings;
>  	int polarity_a;
>  	int polarity_b;
>  	u8 revision;
> -
>  	int error;
>  
> +	if (pdata == NULL) {
> +		dev_err(&c->dev, "No platform data\n");
> +		return -EINVAL;
> +	}
> +
>  	/* Check if the adapter supports the needed features */
>  	if (!i2c_check_functionality(c->adapter,
>  		I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
>  		return -EIO;
>  
> -	if (!c->dev.platform_data) {
> -		v4l_err(c, "No platform data!!\n");
> -		return -ENODEV;
> -	}
> -
>  	device = devm_kzalloc(&c->dev, sizeof(struct tvp7002), GFP_KERNEL);
>  
>  	if (!device)
>  		return -ENOMEM;
>  
>  	sd = &device->sd;
> -	device->pdata = c->dev.platform_data;
> +	device->pdata = pdata;
>  	device->current_timings = tvp7002_timings;
>  
>  	/* Tell v4l2 the device is ready */
> @@ -1084,9 +1128,18 @@ static const struct i2c_device_id tvp7002_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, tvp7002_id);
>  
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id tvp7002_of_match[] = {
> +	{ .compatible = "ti,tvp7002", },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, tvp7002_of_match);
> +#endif
> +
>  /* I2C driver data */
>  static struct i2c_driver tvp7002_driver = {
>  	.driver = {
> +		.of_match_table = of_match_ptr(tvp7002_of_match),
>  		.owner = THIS_MODULE,
>  		.name = TVP7002_MODULE_NAME,
>  	},
> 

Regards,

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux