Hi Sylwester,
On Mon, Jul 15, 2013 at 1:12 AM, Sylwester Nawrocki
<sylvester.nawrocki@xxxxxxxxx> wrote:
> Hi Prabhakar,
>
[Snip]
>> Something similar to fid_polarity.
>
>
> Then as I suggested earlier, let's just add 'sync-on-green-active' DT
> property for that. I wouldn't expect the DT properties to be directly
> replacing your driver platform_data members. Saying in the binding that
> this is a normal operation and that is an inverted one is not very useful
> in general, as you would need to dig in the binding's description what
> "normal" exactly means. sync-on-green-active = <1>; seems much more
> explicit than, e.g. sync-on-green-inverted. By looking at the
> sync-on-green-active property each device driver would determine whether
> it means normal or inverted operation for its device.
>
Ok so I'll add 'sync-on-green-active' property and parse it in
v4l2_of_parse_parallel_bus()
and add it as part of flags. and define the following flags in mediabus.h
V4L2_MBUS_VIDEO_SOG_ACTIVE_{HIGH,LOW}.
Hope you are OK with it.
--
Regards,
Prabhakar Lad
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
