Hi Sylwester,
Will make all the changes you suggested.
Thanks and regards
Arun
On Fri, Jun 21, 2013 at 4:16 AM, Sylwester Nawrocki
<sylvester.nawrocki@xxxxxxxxx> wrote:
> On 05/31/2013 03:03 PM, Arun Kumar K wrote:
>>
>> This driver is for the FIMC-IS IP available in Samsung Exynos5
>> SoC onwards. This patch adds the core files for the new driver.
>>
>> Signed-off-by: Arun Kumar K<arun.kk@xxxxxxxxxxx>
>> Signed-off-by: Kilyeon Im<kilyeon.im@xxxxxxxxxxx>
>> ---
>> drivers/media/platform/exynos5-is/fimc-is-core.c | 304
>> ++++++++++++++++++++++
>> drivers/media/platform/exynos5-is/fimc-is-core.h | 126 +++++++++
>> 2 files changed, 430 insertions(+)
>> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.c
>> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.h
>>
>> diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.c
>> b/drivers/media/platform/exynos5-is/fimc-is-core.c
>> new file mode 100644
>> index 0000000..d24b634
>> --- /dev/null
>> +++ b/drivers/media/platform/exynos5-is/fimc-is-core.c
>> @@ -0,0 +1,304 @@
>> +/*
>> + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver
>> +*
>> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
>> + * Arun Kumar K<arun.kk@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include<linux/bug.h>
>> +#include<linux/ctype.h>
>> +#include<linux/device.h>
>> +#include<linux/debugfs.h>
>> +#include<linux/delay.h>
>> +#include<linux/errno.h>
>> +#include<linux/firmware.h>
>> +#include<linux/fs.h>
>> +#include<linux/gpio.h>
>> +#include<linux/interrupt.h>
>> +#include<linux/kernel.h>
>> +#include<linux/list.h>
>> +#include<linux/module.h>
>> +#include<linux/types.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/pm_runtime.h>
>> +#include<linux/slab.h>
>> +#include<linux/videodev2.h>
>> +#include<linux/of.h>
>> +#include<linux/of_gpio.h>
>> +#include<linux/of_address.h>
>> +#include<linux/of_platform.h>
>> +#include<linux/of_irq.h>
>> +#include<linux/pinctrl/consumer.h>
>> +
>> +#include<media/v4l2-device.h>
>> +#include<media/v4l2-ioctl.h>
>> +#include<media/v4l2-mem2mem.h>
>> +#include<media/v4l2-of.h>
>> +#include<media/videobuf2-core.h>
>> +#include<media/videobuf2-dma-contig.h>
>> +
>> +#include "fimc-is.h"
>> +
>> +static char *fimc_is_clock_name[] = {
>> + [IS_CLK_ISP] = "isp",
>> + [IS_CLK_MCU_ISP] = "mcu_isp",
>> + [IS_CLK_ISP_DIV0] = "isp_div0",
>> + [IS_CLK_ISP_DIV1] = "isp_div1",
>> + [IS_CLK_ISP_DIVMPWM] = "isp_divmpwm",
>> + [IS_CLK_MCU_ISP_DIV0] = "mcu_isp_div0",
>> + [IS_CLK_MCU_ISP_DIV1] = "mcu_isp_div1",
>> +};
>> +
>> +static void fimc_is_clk_put(struct fimc_is *is)
>
>
> nit: fimc_is_put_clocks() would be probably a better name for this function.
>
>
>> +{
>> + int i;
>> +
>> + for (i = 0; i< IS_CLK_MAX_NUM; i++) {
>> + if (IS_ERR_OR_NULL(is->clock[i]))
>> + continue;
>> + clk_unprepare(is->clock[i]);
>> + clk_put(is->clock[i]);
>> + is->clock[i] = NULL;
>> + }
>> +}
>> +
>> +static int fimc_is_clk_get(struct fimc_is *is)
>
>
> nit: fimc_is_get_clocks() ?
>
>> +{
>> + struct device *dev =&is->pdev->dev;
>>
>> + int i, ret;
>> +
>> + for (i = 0; i< IS_CLK_MAX_NUM; i++) {
>> + is->clock[i] = clk_get(dev, fimc_is_clock_name[i]);
>> + if (IS_ERR(is->clock[i]))
>> + goto err;
>> + ret = clk_prepare(is->clock[i]);
>> + if (ret< 0) {
>> + clk_put(is->clock[i]);
>> + is->clock[i] = NULL;
>> + goto err;
>> + }
>> + }
>> + return 0;
>> +err:
>> + fimc_is_clk_put(is);
>> + pr_err("Failed to get clock: %s\n", fimc_is_clock_name[i]);
>> + return -ENXIO;
>> +}
>> +
>> +static int fimc_is_clk_cfg(struct fimc_is *is)
>
>
> nit: fimc_is_configure_clocks() ?
>
>
>> +{
>> + int ret;
>> +
>> + ret = fimc_is_clk_get(is);
>> + if (ret)
>> + return ret;
>> +
>> + /* Set rates */
>> + ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV0], 200 * 1000000);
>> + ret |= clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV1], 100 *
>> 1000000);
>> + ret |= clk_set_rate(is->clock[IS_CLK_ISP_DIV0], 134 * 1000000);
>> + ret |= clk_set_rate(is->clock[IS_CLK_ISP_DIV1], 68 * 1000000);
>> + ret |= clk_set_rate(is->clock[IS_CLK_ISP_DIVMPWM], 34 * 1000000);
>
>
> Please do not obfuscate return value like this.
>
>
> ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV0], 200 * 1000000);
> if (ret)
>
> ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV1], 100 *
> 1000000);
> ...
>
> And how about adding macro definitions for the frequencies, rather
> than using magic numbers in the code ?
>
>> + if (ret)
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> +static int fimc_is_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev =&pdev->dev;
>>
>> + struct resource res;
>> + struct fimc_is *is;
>> + struct pinctrl *pctrl;
>> + void __iomem *regs;
>> + struct device_node *node;
>> + int irq, ret;
>> +
>> + pr_debug("FIMC-IS Probe Enter\n");
>> +
>> + if (!pdev->dev.of_node)
>> + return -ENODEV;
>> +
>> + is = devm_kzalloc(&pdev->dev, sizeof(*is), GFP_KERNEL);
>> + if (!is)
>> + return -ENOMEM;
>> +
>> + is->pdev = pdev;
>
>
>> + ret = of_address_to_resource(dev->of_node, 0,&res);
>>
>> + if (ret< 0)
>> + return ret;
>
>
> It could be simplified to:
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>
> and 'res' could be passed to devm_ioremap_resource() without any checks.
>
>> + regs = devm_ioremap_resource(dev,&res);
>>
>> + if (regs == NULL) {
>> + dev_err(dev, "Failed to obtain io memory\n");
>> + return -ENOENT;
>> + }
>> +
>> + /* Get the PMU base */
>> + node = of_get_child_by_name(dev->of_node, "pmu");
>> + if (!node)
>> + return -ENODEV;
>> + is->pmu_regs = of_iomap(node, 0);
>> + if (!is->pmu_regs)
>> + return -ENOMEM;
>> +
>> + irq = irq_of_parse_and_map(dev->of_node, 0);
>> + if (irq< 0) {
>> + dev_err(dev, "Failed to get IRQ\n");
>> + return irq;
>> + }
>> +
>> + ret = fimc_is_clk_cfg(is);
>> + if (ret< 0) {
>> + dev_err(dev, "Clock config failed\n");
>> + goto err_clk;
>> + }
>> +
>> + platform_set_drvdata(pdev, is);
>> + pm_runtime_enable(dev);
>> +
>> + ret = pm_runtime_get_sync(dev);
>> + if (ret< 0)
>> + goto err_clk;
>> +
>> + is->alloc_ctx = vb2_dma_contig_init_ctx(dev);
>> + if (IS_ERR(is->alloc_ctx)) {
>> + ret = PTR_ERR(is->alloc_ctx);
>> + goto err_pm;
>> + }
>> +
>> + /* Init FIMC Pipeline */
>
>
> s/Init/Initialize ?
>
>
>> + ret = fimc_is_pipeline_init(&is->pipeline, 0, is);
>> + if (ret< 0)
>> + goto err_sd;
>> +
>> + /* Init FIMC Interface */
>
>
> s/Init/ Initialize
>
>
>> + ret = fimc_is_interface_init(&is->interface, regs, irq);
>> + if (ret< 0)
>> + goto err_sd;
>> +
>> + pm_runtime_put(dev);
>> +
>> + dev_dbg(dev, "FIMC-IS registered successfully\n");
>> +
>> + return 0;
>> +
>> +err_sd:
>> + fimc_is_pipeline_destroy(&is->pipeline);
>> +err_vb:
>> + vb2_dma_contig_cleanup_ctx(is->alloc_ctx);
>> +err_pm:
>> + pm_runtime_put(dev);
>> +err_clk:
>> + fimc_is_clk_put(is);
>> +
>> + return ret;
>> +}
>> +
>> +int fimc_is_clk_enable(struct fimc_is *is)
>> +{
>> + int ret;
>> +
>> + ret = clk_enable(is->clock[IS_CLK_ISP]);
>> + ret |= clk_enable(is->clock[IS_CLK_MCU_ISP]);
>
>
> Please don't obfuscate the return value.
>
>> + return ret;
>> +}
>> +
>> +void fimc_is_clk_disable(struct fimc_is *is)
>> +{
>> + clk_disable(is->clock[IS_CLK_ISP]);
>> + clk_disable(is->clock[IS_CLK_MCU_ISP]);
>> +}
>> +
>> +static int fimc_is_pm_resume(struct device *dev)
>> +{
>> + struct fimc_is *is = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + ret = fimc_is_clk_enable(is);
>> + if (ret< 0)
>> + dev_err(dev, "Could not enable clocks\n");
>> +
>> + return 0;
>> +}
>> +
>> +static int fimc_is_pm_suspend(struct device *dev)
>> +{
>> + struct fimc_is *is = dev_get_drvdata(dev);
>> +
>> + fimc_is_clk_disable(is);
>> + return 0;
>> +}
>> +
>> +static int fimc_is_runtime_resume(struct device *dev)
>> +{
>> + return fimc_is_pm_resume(dev);
>> +}
>> +
>> +static int fimc_is_runtime_suspend(struct device *dev)
>> +{
>> + return fimc_is_pm_suspend(dev);
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int fimc_is_resume(struct device *dev)
>> +{
>> + return fimc_is_pm_resume(dev);
>> +}
>> +
>> +static int fimc_is_suspend(struct device *dev)
>> +{
>> + return fimc_is_pm_suspend(dev);
>> +}
>> +#endif /* CONFIG_PM_SLEEP */
>> +
>> +static int fimc_is_remove(struct platform_device *pdev)
>> +{
>> + struct fimc_is *is = platform_get_drvdata(pdev);
>> + struct device *dev =&pdev->dev;
>>
>> +
>> + pm_runtime_disable(dev);
>> + pm_runtime_set_suspended(dev);
>> + fimc_is_pipeline_destroy(&is->pipeline);
>> + vb2_dma_contig_cleanup_ctx(is->alloc_ctx);
>> + fimc_is_clk_put(is);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dev_pm_ops fimc_is_pm_ops = {
>> + SET_SYSTEM_SLEEP_PM_OPS(fimc_is_suspend, fimc_is_resume)
>> + SET_RUNTIME_PM_OPS(fimc_is_runtime_suspend,
>> fimc_is_runtime_resume,
>> + NULL)
>> +};
>> +
>> +static const struct of_device_id exynos5_fimc_is_match[] = {
>> + {
>> + .compatible = "samsung,exynos5250-fimc-is",
>> + },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, exynos5_fimc_is_match);
>> +
>> +static struct platform_driver fimc_is_driver = {
>> + .probe = fimc_is_probe,
>> + .remove = fimc_is_remove,
>> + .driver = {
>> + .name = FIMC_IS_DRV_NAME,
>> + .owner = THIS_MODULE,
>> + .pm =&fimc_is_pm_ops,
>> + .of_match_table = exynos5_fimc_is_match,
>> + }
>> +};
>> +module_platform_driver(fimc_is_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Arun Kumar K<arun.kk@xxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("Samsung Exynos5 (FIMC-IS) Imaging Subsystem driver");
>> diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.h
>> b/drivers/media/platform/exynos5-is/fimc-is-core.h
>> new file mode 100644
>> index 0000000..0512280
>> --- /dev/null
>> +++ b/drivers/media/platform/exynos5-is/fimc-is-core.h
>> @@ -0,0 +1,126 @@
>> +/*
>> + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver
>> + *
>> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
>> + * Arun Kumar K<arun.kk@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +#ifndef FIMC_IS_CORE_H_
>> +#define FIMC_IS_CORE_H_
>> +
>> +#include<linux/bug.h>
>> +#include<linux/clk.h>
>> +#include<linux/device.h>
>> +#include<linux/errno.h>
>> +#include<linux/firmware.h>
>> +#include<linux/interrupt.h>
>> +#include<linux/kernel.h>
>> +#include<linux/list.h>
>> +#include<linux/module.h>
>> +#include<linux/types.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/pm_runtime.h>
>> +#include<linux/slab.h>
>> +#include<linux/videodev2.h>
>> +
>> +#include<asm/barrier.h>
>> +#include<linux/sizes.h>
>> +#include<linux/io.h>
>> +#include<linux/irqreturn.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/sched.h>
>> +#include<linux/spinlock.h>
>> +
>> +#include<media/media-entity.h>
>> +#include<media/videobuf2-core.h>
>> +#include<media/v4l2-ctrls.h>
>> +#include<media/v4l2-device.h>
>> +#include<media/v4l2-mem2mem.h>
>> +#include<media/v4l2-mediabus.h>
>> +#include<media/s5p_fimc.h>
>> +
>> +#define FIMC_IS_DRV_NAME "exynos5-fimc-is"
>> +#define FIMC_IS_CLK_NAME "fimc_is"
>
>
> Unused symbol, please remove.
>
>
>> +#define FIMC_IS_DEBUG_MSG 0x3f
>> +#define FIMC_IS_DEBUG_LEVEL 3
>
>
> These 2 are unused too.
>
>
>> +#define FIMC_IS_COMMAND_TIMEOUT (3*HZ)
>> +#define FIMC_IS_STARTUP_TIMEOUT (3*HZ)
>> +#define FIMC_IS_SHUTDOWN_TIMEOUT (10*HZ)
>
>
> Please add spaces around '*'. It also applies to other places in most
> of the patches.
>
>
>> +
>> +#define FW_SHARED_OFFSET (0x8C0000)
>
>
>> +#define DEBUG_CNT (500*1024)
>> +#define DEBUG_OFFSET (0x840000)
>> +#define DEBUGCTL_OFFSET (0x8BD000)
>> +#define DEBUG_FCOUNT (0x8C64C0)
>
>
> Please put all hex numbers in lower case.
>
>
>> +#define FIMC_IS_MAX_INSTANCES 1
>> +
>> +#define FIMC_IS_MAX_GPIOS 32
>> +#define FIMC_IS_NUM_SENSORS 2
>> +
>> +#define FIMC_IS_MAX_PLANES 3
>> +#define FIMC_IS_NUM_SCALERS 2
>> +
>> +enum fimc_is_clks {
>> + IS_CLK_ISP,
>> + IS_CLK_MCU_ISP,
>> + IS_CLK_ISP_DIV0,
>> + IS_CLK_ISP_DIV1,
>> + IS_CLK_ISP_DIVMPWM,
>> + IS_CLK_MCU_ISP_DIV0,
>> + IS_CLK_MCU_ISP_DIV1,
>> + IS_CLK_MAX_NUM
>> +};
>> +
>> +/* Video capture states */
>> +enum fimc_is_video_state {
>> + STATE_INIT,
>> + STATE_BUFS_ALLOCATED,
>> + STATE_RUNNING,
>> +};
>> +
>> +enum fimc_is_scaler_id {
>> + SCALER_SCC,
>> + SCALER_SCP
>> +};
>> +
>> +enum fimc_is_sensor_pos {
>> + SENSOR_CAM0,
>> + SENSOR_CAM1
>> +};
>> +
>> +struct fimc_is_buf {
>> + struct list_head list;
>> + struct vb2_buffer *vb;
>> + unsigned int paddr[FIMC_IS_MAX_PLANES];
>> +};
>> +
>> +struct fimc_is_meminfo {
>> + unsigned int fw_paddr;
>> + unsigned int fw_vaddr;
>> + unsigned int region_paddr;
>> + unsigned int region_vaddr;
>> + unsigned int shared_paddr;
>> + unsigned int shared_vaddr;
>> +};
>> +
>> +/**
>> + * struct fimc_is_fmt - the driver's internal color format data
>> + * @name: format description
>> + * @fourcc: the fourcc code for this format
>> + * @depth: number of bytes per pixel
>> + * @num_planes: number of planes for this color format
>> + */
>> +struct fimc_is_fmt {
>> + char *name;
>> + unsigned int fourcc;
>> + unsigned int depth[FIMC_IS_MAX_PLANES];
>> + unsigned int num_planes;
>> +};
>> +
>> +#endif
>
>
> Regards,
> Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
