The sensor is powered by three supplies. Use the bulk regulator API to
enable and disable them instead of performing the operations manually.
This fixes a warning caused by ignoring the return value of
regulator_enable().
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/mt9p031.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
Changes since v1:
- Return the devm_regulator_bulk_get() return code instead of -ENODEV
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 6187416..c93640b 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -126,9 +126,7 @@ struct mt9p031 {
int power_count;
struct clk *clk;
- struct regulator *vaa;
- struct regulator *vdd;
- struct regulator *vdd_io;
+ struct regulator_bulk_data regulators[3];
enum mt9p031_model model;
struct aptina_pll pll;
@@ -273,6 +271,8 @@ static inline int mt9p031_pll_disable(struct mt9p031 *mt9p031)
static int mt9p031_power_on(struct mt9p031 *mt9p031)
{
+ int ret;
+
/* Ensure RESET_BAR is low */
if (gpio_is_valid(mt9p031->reset)) {
gpio_set_value(mt9p031->reset, 0);
@@ -280,9 +280,10 @@ static int mt9p031_power_on(struct mt9p031 *mt9p031)
}
/* Bring up the supplies */
- regulator_enable(mt9p031->vdd);
- regulator_enable(mt9p031->vdd_io);
- regulator_enable(mt9p031->vaa);
+ ret = regulator_bulk_enable(ARRAY_SIZE(mt9p031->regulators),
+ mt9p031->regulators);
+ if (ret < 0)
+ return ret;
/* Emable clock */
if (mt9p031->clk)
@@ -304,9 +305,8 @@ static void mt9p031_power_off(struct mt9p031 *mt9p031)
usleep_range(1000, 2000);
}
- regulator_disable(mt9p031->vaa);
- regulator_disable(mt9p031->vdd_io);
- regulator_disable(mt9p031->vdd);
+ regulator_bulk_disable(ARRAY_SIZE(mt9p031->regulators),
+ mt9p031->regulators);
if (mt9p031->clk)
clk_disable_unprepare(mt9p031->clk);
@@ -986,14 +986,14 @@ static int mt9p031_probe(struct i2c_client *client,
mt9p031->model = did->driver_data;
mt9p031->reset = -1;
- mt9p031->vaa = devm_regulator_get(&client->dev, "vaa");
- mt9p031->vdd = devm_regulator_get(&client->dev, "vdd");
- mt9p031->vdd_io = devm_regulator_get(&client->dev, "vdd_io");
+ mt9p031->regulators[0].supply = "vdd";
+ mt9p031->regulators[1].supply = "vdd_io";
+ mt9p031->regulators[2].supply = "vaa";
- if (IS_ERR(mt9p031->vaa) || IS_ERR(mt9p031->vdd) ||
- IS_ERR(mt9p031->vdd_io)) {
+ ret = devm_regulator_bulk_get(&client->dev, 3, mt9p031->regulators);
+ if (ret < 0) {
dev_err(&client->dev, "Unable to get regulators\n");
- return -ENODEV;
+ return ret;
}
v4l2_ctrl_handler_init(&mt9p031->ctrls, ARRAY_SIZE(mt9p031_ctrls) + 6);
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
