The r820t_imr() calibration function of the Rafael Micro R820T tuner
generates this error at every tune attempt:
r820t 0-001a: No valid PLL values for 2252021 kHz!
The function was inspired by the original Realtek driver for rtl2832 devices
with the r820t tuner; anyway, in the original code the XTAL frequency of
the tuner was expressed in KHz, while in the kernel driver it is expressed
in Hz; so the calibration failed because of an out-of-range initial value.
The final result of the computation is then passed to the r820t_set_mux()
and r820t_set_pll() functions, but the conversion from KHz to Hz is already
correctly implemented.
Signed-off-by: Gianluca Gennari <gennarone@xxxxxxxxx>
---
drivers/media/tuners/r820t.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/tuners/r820t.c b/drivers/media/tuners/r820t.c
index 4835021..b817110 100644
--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -1857,9 +1857,9 @@ static int r820t_imr(struct r820t_priv *priv, unsigned imr_mem, bool im_flag)
int reg18, reg19, reg1f;
if (priv->cfg->xtal > 24000000)
- ring_ref = priv->cfg->xtal / 2;
+ ring_ref = priv->cfg->xtal / 2000;
else
- ring_ref = priv->cfg->xtal;
+ ring_ref = priv->cfg->xtal / 1000;
n_ring = 15;
for (n = 0; n < 16; n++) {
--
1.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
