Re: [RFC 1/3] saa7115: Set saa7113 init to values from datasheet

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 31 May 2013 10:08:27 -0300
Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> wrote:

> Em Thu, 30 May 2013 21:00:01 +0200
> Jon Arne Jørgensen <jonarne@xxxxxxxxxx> escreveu:
> 
> > On Thu, May 30, 2013 at 08:33:32AM +0300, Timo Teras wrote:
> > > I would rather have the platform_data provide the new table. Or
> > > if you think bulk of the table will be the same for most users,
> > > then perhaps add there an enum saying which table to use - and
> > > name the tables according to the chip variant it applies to.
> > > 
> > 
> > I think the bulk of the table will be the same for all drivers.
> > It's one bit here and one bit there that needs changing.
> > As the driver didn't support platform data.
> > Changing to a new init table for the drivers that implement
> > platform_data shouldn't cause any regressions.
> 
> There are several things that are very bad on passing a table via
> platform data:

Sorry, my wording was self-conflicting. The intention was to
suggest providing an enum saying which table to use. Not that the
platform data would provide the whole table.

> 	1) you're adding saa711x-specific data at the bridge driver,
> 	   so, the saa711x code is spread on several places at the
> 	   long term;
> 
> 	2) some part of the saa711x code may override the data there, 
> 	   as it is not aware about what bits should be preserved from
> 	   the new device;
> 
> 	3) due (2), latter changes on the code are more likely to
> 	   cause regressions;
> 
> 	4) also due to (2), some hacks can be needed, in order to warn
> 	   saa711x to handle some things differently.

Agreed.

> That's why it is a way better to add meaningful parameters telling
> what bits are needed for the driver to work with the bridge. That's
> also why we do this with all other drivers.

Based on the latest patch, more of these bits need to be controlled
individually than I figured. So yes, individual meaningful bits do make
the most sense.

Thanks,
 Timo
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux