Hallo all,
I have a problem with a Cinergy TStick RC rev.3 (rtl2832u) DVB-T
USB-Stick, that I only get 4 programs, all on one transponder. This is
the full story:
Before I used OpenSUSE 12.2 with a 3.4 Kernel and compiled this driver
by myself:
https://github.com/tmair/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0
This worked fine.
After a hard disk crash I had to install my system anyway so I switched
to OpenSUSE 12.3 with a 3.7 Kernel, because this should support the
rtl2832u directly.
Basically this is working. The Stick is detected:
May 30 13:15:37 server kernel: usb 1-3: new high-speed USB device number
10 using ehci_hcd
May 30 13:15:37 server kernel: usb 1-3: New USB device found,
idVendor=0ccd, idProduct=00d3
May 30 13:15:37 server kernel: usb 1-3: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
May 30 13:15:37 server kernel: usb 1-3: Product: RTL2838UHIDIR
May 30 13:15:37 server kernel: usb 1-3: Manufacturer: Realtek
May 30 13:15:37 server kernel: usb 1-3: SerialNumber: 00000001
May 30 13:15:37 server kernel: usb 1-3: dvb_usb_v2: found a 'TerraTec
Cinergy T Stick RC (Rev. 3)' in warm state
May 30 13:15:37 server mtp-probe[12243]: checking bus 1, device 10:
"/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3"
May 30 13:15:37 server mtp-probe[12243]: bus: 1, device: 10 was not an
MTP device
May 30 13:15:37 server kernel: usb 1-3: dvb_usb_v2: will pass the
complete MPEG2 transport stream to the software demuxer
May 30 13:15:37 server kernel: DVB: registering new adapter (TerraTec
Cinergy T Stick RC (Rev. 3))
May 30 13:15:37 server kernel: usb 1-3: DVB: registering adapter 0
frontend 0 (Realtek RTL2832 (DVB-T))...
May 30 13:15:37 server kernel: i2c i2c-5: e4000: Elonics E4000
successfully identified
May 30 13:15:37 server kernel: Registered IR keymap rc-empty
May 30 13:15:37 server kernel: input: TerraTec Cinergy T Stick RC (Rev.
3) as /devices/pci0000:00/0000:00:12.2/usb1/1-3/rc/rc7/input23
May 30 13:15:37 server kernel: rc7: TerraTec Cinergy T Stick RC (Rev. 3)
as /devices/pci0000:00/0000:00:12.2/usb1/1-3/rc/rc7
May 30 13:15:37 server kernel: usb 1-3: dvb_usb_v2: schedule remote
query interval to 400 msecs
May 30 13:15:37 server kernel: usb 1-3: dvb_usb_v2: 'TerraTec Cinergy T
Stick RC (Rev. 3)' successfully initialized and connected
These kernel moduls are loaded:
rtl2832 18542 1
dvb_usb_rtl28xxu 28608 0
dvb_usb_v2 34564 2 dvb_usb_af9015,dvb_usb_rtl28xxu
rc_core 30555 4 dvb_usb_af9015,dvb_usb_rtl28xxu,dvb_usb_v2
rtl2830 18316 1 dvb_usb_rtl28xxu
dvb_core 109206 3 rtl2832,dvb_usb_v2,rtl2830
The problem is, that only four DVB-T programs on one transponder can be
received, but these in a very good quality. It should be around 20
programs. I tested this with MythTV and Kaffeine and both only find the
same 4 programs. With a Windows 7 PC and the antenna on the same
position I get all programs in good quality. So I do not think the stick
is broken or the quality of the antenna signal is the problem.
Has anyone an idea?
Best
Torsten
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
