From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
The framework documentation used the g_chip_ident op as an example. This
op has been removed, so replace its use in the examples by the g_std op.
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
Documentation/video4linux/v4l2-framework.txt | 13 ++++++-------
Documentation/zh_CN/video4linux/v4l2-framework.txt | 13 ++++++-------
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index a300b28..24353ec 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -246,7 +246,6 @@ may be NULL if the subdev driver does not support anything from that category.
It looks like this:
struct v4l2_subdev_core_ops {
- int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
int (*log_status)(struct v4l2_subdev *sd);
int (*init)(struct v4l2_subdev *sd, u32 val);
...
@@ -346,24 +345,24 @@ Afterwards the subdev module can be unloaded and sd->dev == NULL.
You can call an ops function either directly:
- err = sd->ops->core->g_chip_ident(sd, &chip);
+ err = sd->ops->core->g_std(sd, &norm);
but it is better and easier to use this macro:
- err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
+ err = v4l2_subdev_call(sd, core, g_std, &norm);
The macro will to the right NULL pointer checks and returns -ENODEV if subdev
-is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_chip_ident is
-NULL, or the actual result of the subdev->ops->core->g_chip_ident ops.
+is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_std is
+NULL, or the actual result of the subdev->ops->core->g_std ops.
It is also possible to call all or a subset of the sub-devices:
- v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip);
+ v4l2_device_call_all(v4l2_dev, 0, core, g_std, &norm);
Any subdev that does not support this ops is skipped and error results are
ignored. If you want to check for errors use this:
- err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);
+ err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_std, &norm);
Any error except -ENOIOCTLCMD will exit the loop with that error. If no
errors (except -ENOIOCTLCMD) occurred, then 0 is returned.
diff --git a/Documentation/zh_CN/video4linux/v4l2-framework.txt b/Documentation/zh_CN/video4linux/v4l2-framework.txt
index 44c1d93..0da95db 100644
--- a/Documentation/zh_CN/video4linux/v4l2-framework.txt
+++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt
@@ -247,7 +247,6 @@ i2c_client 结构体，i2c_set_clientdata() 函数可用于保存一个 v4l2_sub
这些结构体定义如下：
struct v4l2_subdev_core_ops {
- int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
int (*log_status)(struct v4l2_subdev *sd);
int (*init)(struct v4l2_subdev *sd, u32 val);
...
@@ -337,24 +336,24 @@ subdev->dev 域就指向了 v4l2_device。
注册之设备后，可通过以下方式直接调用其操作函数：
- err = sd->ops->core->g_chip_ident(sd, &chip);
+ err = sd->ops->core->g_std(sd, &norm);
但使用如下宏会比较容易且合适：
- err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
+ err = v4l2_subdev_call(sd, core, g_std, &norm);
这个宏将会做 NULL 指针检查，如果 subdev 为 NULL，则返回-ENODEV；如果
-subdev->core 或 subdev->core->g_chip_ident 为 NULL，则返回 -ENOIOCTLCMD；
-否则将返回 subdev->ops->core->g_chip_ident ops 调用的实际结果。
+subdev->core 或 subdev->core->g_std 为 NULL，则返回 -ENOIOCTLCMD；
+否则将返回 subdev->ops->core->g_std ops 调用的实际结果。
有时也可能同时调用所有或一系列子设备的某个操作函数：
- v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip);
+ v4l2_device_call_all(v4l2_dev, 0, core, g_std, &norm);
任何不支持此操作的子设备都会被跳过，并忽略错误返回值。但如果你需要
检查出错码，则可使用如下函数：
- err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);
+ err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_std, &norm);
除 -ENOIOCTLCMD 外的任何错误都会跳出循环并返回错误值。如果（除 -ENOIOCTLCMD
外）没有错误发生，则返回 0。
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
