From: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> add OF support for the mt9p031 sensor driver. Alongside this patch sorts the header inclusion alphabetically. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx> Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> Cc: Sakari Ailus <sakari.ailus@xxxxxx> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Cc: Rob Herring <rob.herring@xxxxxxxxxxx> Cc: Rob Landley <rob@xxxxxxxxxxx> Cc: Arnd Bergmann <arnd@xxxxxxxx> Cc: devicetree-discuss@xxxxxxxxxxxxxxxx Cc: davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx Cc: linux-doc@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx --- Changes for NON RFC v1: 1: added missing call for of_node_put(). Changes for RFC v4 (https://patchwork.kernel.org/patch/2556251/): 1: Renamed "gpio-reset" property to "reset-gpios". 2: Dropped assigning the driver data from the of node. Changes for RFC v3(https://patchwork.kernel.org/patch/2515921/): 1: Dropped check if gpio-reset is valid. 2: Fixed some code nits. 3: Included a reference to the V4L2 DT bindings documentation. Changes for RFC v2 (https://patchwork.kernel.org/patch/2510201/): 1: Used '-' instead of '_' for device properties. 2: Specified gpio reset pin as phandle in device node. 3: Handle platform data properly even if kernel is compiled with devicetree support. 4: Used dev_* for messages in drivers instead of pr_*. 5: Changed compatible property to "aptina,mt9p031" and "aptina,mt9p031m". 6: Sorted the header inclusion alphabetically and fixed some minor code nits. RFC v1: https://patchwork.kernel.org/patch/2498791/ .../devicetree/bindings/media/i2c/mt9p031.txt | 40 ++++++++++++++++++ drivers/media/i2c/mt9p031.c | 43 +++++++++++++++++++- 2 files changed, 81 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt new file mode 100644 index 0000000..59d613c --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt @@ -0,0 +1,40 @@ +* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor + +The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 2592H x 1944V. It is programmable through a simple +two-wire serial interface. + +Required Properties : +- compatible : value should be either one among the following + (a) "aptina,mt9p031" for mt9p031 sensor + (b) "aptina,mt9p031m" for mt9p031m sensor + +- input-clock-frequency : Input clock frequency. + +- pixel-clock-frequency : Pixel clock frequency. + +Optional Properties : +- reset-gpios: Chip reset GPIO + +For further reading of port node refer Documentation/devicetree/bindings/media/ +video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + mt9p031@5d { + compatible = "aptina,mt9p031"; + reg = <0x5d>; + reset-gpios = <&gpio3 30 0>; + + port { + mt9p031_1: endpoint { + input-clock-frequency = <6000000>; + pixel-clock-frequency = <96000000>; + }; + }; + }; + ... + }; diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c index bf49899..bb1f993 100644 --- a/drivers/media/i2c/mt9p031.c +++ b/drivers/media/i2c/mt9p031.c @@ -16,9 +16,10 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio.h> -#include <linux/module.h> #include <linux/i2c.h> #include <linux/log2.h> +#include <linux/module.h> +#include <linux/of_gpio.h> #include <linux/pm.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> @@ -28,6 +29,7 @@ #include <media/v4l2-chip-ident.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> +#include <media/v4l2-of.h> #include <media/v4l2-subdev.h> #include "aptina-pll.h" @@ -928,10 +930,37 @@ static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = { * Driver initialization and probing */ +static struct mt9p031_platform_data * +mt9p031_get_pdata(struct i2c_client *client) +{ + struct mt9p031_platform_data *pdata = NULL; + struct device_node *np; + + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) + return client->dev.platform_data; + + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); + if (!np) + return NULL; + + pdata = devm_kzalloc(&client->dev, sizeof(struct mt9p031_platform_data), + GFP_KERNEL); + if (!pdata) + goto done; + + pdata->reset = of_get_named_gpio(client->dev.of_node, "reset-gpios", 0); + of_property_read_u32(np, "input-clock-frequency", &pdata->ext_freq); + of_property_read_u32(np, "pixel-clock-frequency", &pdata->target_freq); + +done: + of_node_put(np); + return pdata; +} + static int mt9p031_probe(struct i2c_client *client, const struct i2c_device_id *did) { - struct mt9p031_platform_data *pdata = client->dev.platform_data; + struct mt9p031_platform_data *pdata = mt9p031_get_pdata(client); struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct mt9p031 *mt9p031; unsigned int i; @@ -1070,8 +1099,18 @@ static const struct i2c_device_id mt9p031_id[] = { }; MODULE_DEVICE_TABLE(i2c, mt9p031_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id mt9p031_of_match[] = { + { .compatible = "aptina,mt9p031", }, + { .compatible = "aptina,mt9p031m", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt9p031_of_match); +#endif + static struct i2c_driver mt9p031_i2c_driver = { .driver = { + .of_match_table = of_match_ptr(mt9p031_of_match), .name = "mt9p031", }, .probe = mt9p031_probe, -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
