On Thu, May 23, 2013 at 09:48:38PM -0300, "Alejandro A. Valdés" wrote: Hi, > On 05/23/2013 05:07 PM, "Alejandro A. Valdés" wrote: > >On 05/23/2013 04:12 PM, Ezequiel Garcia wrote: > >>Alejandro, > >> > >>You dropped the linux-media list from Cc. I'm adding it back. > >> > >>On Thu, May 23, 2013 at 3:30 PM, "Alejandro A. Valdés" > >><av2406@xxxxxxxxx> wrote: > >>># lsmod > >>>Module Size Used by > >>>snd_usb_audio 106622 0 > >>>snd_usbmidi_lib 24590 1 snd_usb_audio > >>>easycap 1213861 1 > >>Okey. This is all I need. You're using the "easycap" driver which is > >>an old, deprecated and staging (i.e. experimental) driver for easycap > >>devices. > >> > >>The new driver, which is fully supported, is called "stk1160". It's > >>been completely written from scratch, so it's not related to the old > >>one. > >> > >>Upgrade your kernel and/or your distribution to get a kernel >= v3.6 > >>which includes the new driver, try again and let me know what happens. > >> > >>-- > >> Ezequiel > > Thanks for the tip. Will do so as son as I get another box to > >play with for a while. Not in shape to risk this environment. Will > >let you know the results. Regards, > >Alejandro > Good evening, > > I upgraded the kernel as recommend, but it still doesn't seem to be > working. Still no sound. I attached some files with the output of > the same set of commands, we have been working with this afternoon. > > I'll be grateful if you can provide further guidelines on this. > > Thanks a lot, > Alejandro, > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xf7cf8000 irq 45 > [ 183.776116] usb 1-1: new high-speed USB device number 5 using ehci_hcd > [ 183.908837] usb 1-1: New USB device found, idVendor=05e1, idProduct=0408 > [ 183.908852] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 183.908862] usb 1-1: Product: USB 2.0 Video Capture Controller > [ 183.908871] usb 1-1: Manufacturer: Syntek Semiconductor > [ 187.113354] easycap::0adjust_standard: selected standard: PAL_BGHIN > [ 187.424338] easycap::0adjust_format: sought: 640x480,UYVY(0x59565955),1=field,0x00=std mask > [ 187.424352] easycap::0adjust_format: sought: V4L2_FIELD_NONE > [ 187.424367] easycap::0adjust_format: actioning: 640x480 PAL_BGHIN_AT_640x480_FMT_UYVY-n > [ 187.448211] easycap::0adjust_brightness: adjusting brightness to 0x7F > [ 187.472216] easycap::0adjust_contrast: adjusting contrast to 0x3F > [ 187.496207] easycap::0adjust_saturation: adjusting saturation to 0x2F > [ 187.520220] easycap::0adjust_hue: adjusting hue to 0x00 > [ 187.521800] easycap::0easycap_register_video: registered with videodev: 1=minor > [ 187.521812] easycap::0easycap_usb_probe: ends successfully for interface 0 > [ 187.522249] easycap::0easycap_usb_probe: ends successfully for interface 1 > [ 187.522604] easycap::0easycap_usb_probe: audio hardware is AC'97 > [ 187.522662] easycap: probe of 1-1:1.2 failed with error -146692016 > [ 187.525726] easycap:: easycap_open: ==========OPEN========= > [ 190.581347] easycap::0adjust_standard: selected standard: PAL_BGHIN > [ 190.892343] easycap::0adjust_format: sought: 640x480,UYVY(0x59565955),1=field,0x00=std mask > [ 190.892356] easycap::0adjust_format: sought: V4L2_FIELD_NONE > [ 190.892371] easycap::0adjust_format: actioning: 640x480 PAL_BGHIN_AT_640x480_FMT_UYVY-n > [ 190.916222] easycap::0adjust_brightness: adjusting brightness to 0x7F > [ 190.940224] easycap::0adjust_contrast: adjusting contrast to 0x3F > [ 190.964224] easycap::0adjust_saturation: adjusting saturation to 0x2F > [ 190.988221] easycap::0adjust_hue: adjusting hue to 0x00 It seems you are still using the easycap driver. [...] > Module Size Used by > snd_hda_intel 33051 5 > snd_hda_codec 116694 2 snd_hda_codec_realtek,snd_hda_intel > bluetooth 191657 10 rfcomm,bnep > uvcvideo 72248 0 > easycap 1213860 1 This should say stk1160 if you were using the new driver. I'm not sure what about what kernel first included the stk1160, but it doesn't seem to be included in the kernel you built. Best regards Jon Arne Jørgensen -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
