Dear developer,I've a pinnacle pctv usb stick which is not supported. As mentioned in log, I'm sending the dmesg log to you:
hub 3-0:1.0: port 1: status 0101 change 0001 [ 1219.090245] hub 3-0:1.0: state 7 ports 4 chg 0002 evt 0000 [ 1219.090254] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 1219.141055] hub 3-0:1.0: port 1 not reset yet, waiting 50ms [ 1219.242697] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1219.254611] usb 3-1: default language 0x0409 [ 1219.257510] usb 3-1: udev 2, busnum 3, minor = 257 [ 1219.257514] usb 3-1: New USB device found, idVendor=eb1a, idProduct=2870[ 1219.257517] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1219.257520] usb 3-1: Product: USB 2870 Device [ 1219.257658] usb 3-1: usb_probe_device [ 1219.257660] usb 3-1: configuration #1 chosen from 1 choice [ 1219.257725] usb 3-1: Successful Endpoint Configure command [ 1219.257766] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 1219.277783] em28xx 3-1:1.0: usb_probe_interface [ 1219.277786] em28xx 3-1:1.0: usb_probe_interface - got id[ 1219.277789] em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870, interface 0, class 0)
[ 1219.277790] em28xx: Video interface 0 found [ 1219.277791] em28xx: DVB interface 0 found [ 1219.277813] em28xx #0: chip ID is em2870[ 1219.352535] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00 [ 1219.352541] em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00 [ 1219.352545] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00 [ 1219.352549] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 72 eb e4 49 [ 1219.352553] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1219.352557] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1219.352561] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 1219.352565] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00 [ 1219.352569] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 1219.352573] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1219.352577] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1219.352581] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1219.352585] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1219.352589] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1219.352593] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1219.352597] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1219.352602] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x11fa5ec0 [ 1219.352604] em28xx #0: EEPROM info: [ 1219.352604] em28xx #0: No audio on board. [ 1219.352605] em28xx #0: 500mA max power[ 1219.352606] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 1219.390543] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 1219.393247] em28xx #0: found i2c device @ 0xc0 [tuner (analog)][ 1219.398489] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 1219.398491] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[ 1219.398491] em28xx #0: Please send an email with this log to:[ 1219.398492] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx>
[ 1219.398493] em28xx #0: Board eeprom hash is 0x11fa5ec0 [ 1219.398493] em28xx #0: Board i2c devicelist hash is 0x4b800080[ 1219.398494] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
... [ 1219.398567] em28xx #0: card=86 -> PCTV QuatroStick nano (520e) [ 1219.398568] em28xx #0: Board not discovered[ 1219.398569] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) [ 1219.398570] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 1219.398570] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[ 1219.398571] em28xx #0: Please send an email with this log to:[ 1219.398571] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx>
[ 1219.398572] em28xx #0: Board eeprom hash is 0x11fa5ec0 [ 1219.398573] em28xx #0: Board i2c devicelist hash is 0x4b800080[ 1219.398573] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[ 1219.398574] em28xx #0: card=0 -> Unknown EM2800 video grabber ... [ 1219.398641] em28xx #0: card=86 -> PCTV QuatroStick nano (520e) [ 1219.398643] em28xx #0: v4l2 driver version 0.1.3 [ 1219.398719] usb 3-1: Successful Endpoint Configure command [ 1219.400353] em28xx #0: V4L2 video device registered as video1 [ 1219.400490] usbcore: registered new interface driver em28xx [ 1219.402311] usb 3-1: Successful Endpoint Configure command kernel 3.7.10 (Gentoo)I know this device was supported in the past by the old M. Rechberger drivers. If you need any other logs, please let me know.
Best regards, Ingbert
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
