On Tuesday 07 May 2013 02:11:27 Kim, Milo wrote: > On Monday, May 06, 2013 6:34 PM Andrzej Hajda wrote: > > > > This RFC proposes generic API for exposing flash subdevices via LED > > framework. > > > > Rationale > > > > Currently there are two frameworks which are used for exposing LED > > flash to user space: > > - V4L2 flash controls, > > - LED framework(with custom sysfs attributes). > > > > The list below shows flash drivers in mainline kernel with initial > > commit date and typical chip application (according to producer): > > > > LED API: > > lm3642: 2012-09-12, Cameras > > lm355x: 2012-09-05, Cameras > > max8997: 2011-12-14, Cameras (?) > > lp3944: 2009-06-19, Cameras, Lights, Indicators, Toys > > pca955x: 2008-07-16, Cameras, Indicators (?) > > > > V4L2 API: > > as3645a: 2011-05-05, Cameras > > adp1653: 2011-05-05, Cameras > > > > V4L2 provides richest functionality, but there is often demand from > > application developers to provide already established LED API. We would > > like to have an unified user interface for flash devices. Some of devices > > already have the LED API driver exposing limited set of a Flash IC > > functionality. In order to support all required features the LED API > > would have to be extended or the V4L2 API would need to be used. However > > when switching from a LED to a V4L2 Flash driver existing LED API > > interface would need to be retained. > > > > Proposed solution > > > > This patch adds V4L2 helper functions to register existing V4L2 flash > > subdev as LED class device. After registration via v4l2_leddev_register > > appropriate entry in /sys/class/leds/ is created. During registration all > > V4L2 flash controls are enumerated and corresponding attributes are added. > > > > I have attached also patch with new max77693-led driver using v4l2_leddev. > > This patch requires presence of the patch "max77693: added device tree > > support": https://patchwork.kernel.org/patch/2414351/ . > > > > Additional features > > > > - simple API to access all V4L2 flash controls via sysfs, > > - V4L2 subdevice should not be registered by V4L2 device to use it, > > - LED triggers API can be used to control the device, > > - LED device is optional - it will be created only if V4L2_LEDDEV > > configuration option is enabled and the subdev driver calls > > v4l2_leddev_register. > > > > Doubts > > > > This RFC is a result of a uncertainty which API developers should expose > > by their flash drivers. It is a try to gluing together both APIs. I am not > > sure if it is the best solution, but I hope there will be some discussion > > and hopefully some decisions will be taken which way we should follow. > > The LED subsystem provides similar APIs for the Camera driver. > With LED trigger event, flash and torch are enabled/disabled. > I'm not sure this is applicable for you. > Could you take a look at LED camera trigger feature? > > For the camera LED trigger, > https://git.kernel.org/cgit/linux/kernel/git/cooloney/linux-leds.git/commit/ > ?h=f or-next&id=48a1d032c954b9b06c3adbf35ef4735dd70ab757 > > Example of camera flash driver, > https://git.kernel.org/cgit/linux/kernel/git/cooloney/linux-leds.git/commit/ > ?h=f or-next&id=313bf0b1a0eaeaac17ea8c4b748f16e28fce8b7a I think we should decide on one API. Implementing two APIs for a single device is usually messy, and will result in different feature sets (and different bugs) being implemented through each API, depending on the driver. Interactions between the APIs are also a pain point on the kernel side to properly synchronize calls. The LED API is too limited for torch and flash usage, but I'm definitely open to moving flash devices to the LED API is we can extend it in a way that it covers all the use cases. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
