Hi Hans, (CC'ing Sakari, I know he's missing reviewing V4L2 patches ;-)) On Monday 06 May 2013 15:41:41 Hans Verkuil wrote: > On Mon April 29 2013 22:52:31 Laurent Pinchart wrote: > > On Friday 12 April 2013 17:36:16 Hans Verkuil wrote: > > > This RFC looks at adding support for motion detection to V4L2. This is > > > the main missing piece that prevents the go7007 and solo6x10 drivers > > > from being moved into mainline from the staging directory. > > > > > > Step one is to look at existing drivers/hardware: > > > > > > 1) The go7007 driver: > > > - divides the frame into blocks of 16x16 pixels each (that's 45x36 > > > blocks for PAL) > > > - each block can be assigned to region 0, 1, 2 or 3 > > > - each region has: > > > - a pixel change threshold > > > - a motion vector change threshold > > > - a trigger level; if this is 0, then motion detection for this > > > region is disabled > > > - when streaming the reserved field of v4l2_buffer is used as a > > > bitmask: one bit for each region where motion is detected. > > > > > > 2) The solo6x10 driver: > > > - divides the frame into blocks of 16x16 pixels each > > > - each block has its own threshold > > > - the driver adds one MOTION_ON buffer flag and one MOTION_DETECTED > > > buffer flag. > > > - motion detection can be disabled or enabled. > > > - the driver has a global motion detection mode with just one > > > threshold: in that case all blocks are set to the same threshold. > > > - there is also support for displaying a border around the image if > > > motion is detected (very hardware specific). > > > > > > 3) The tw2804 video encoder (based on the datasheet, not implemented in > > > the driver): > > > - divides the image in 12x12 blocks (block size will differ for NTSC > > > vs PAL) > > > - motion detection can be enabled or disabled for each block > > > - there are four controls: > > > - luminance level change threshold > > > - spatial sensitivity threshold > > > - temporal sensitivity threshold > > > - velocity control (determines how well slow motions are > > > detected) > > > - detection is reported by a hardware pin in this case > > > > > > Comparing these three examples of motion detection I see quite a lot of > > > similarities, enough to make a proposal for an API: > > > > > > - Add a MOTION_DETECTION menu control: > > > - Disabled > > > - Global Motion Detection > > > - Regional Motion Detection > > > > > > If 'Global Motion Detection' is selected, then various threshold > > > controls become available. What sort of thresholds are available seems > > > to be quite variable, so I am inclined to leave this as private > > > controls. > > > > > > - Add new buffer flags when motion is detected. The go7007 driver would > > > need 4 bits (one for each region), the others just one. This can be > > > done by taking 4 bits from the v4l2_buffer flags field. There are still > > > 16 bits left there, and if it becomes full, then we still have two > > > reserved fields. I see no reason for adding a 'MOTION_ON' flag as the > > > solo6x10 driver does today: just check the MOTION_DETECTION control if > > > you want to know if motion detection is on or not. > > > > We're really starting to shove metadata in buffer flags. Isn't it time to > > add a proper metadata API ? I don't really like the idea of using > > (valuable) buffer flags for a feature supported by three drivers only. > > There are still 18 (not 16) bits remaining, so we are hardly running out of > bits. And I feel it is overkill to create a new metadata API for just a few > bits. Creating a metadata API for any of the small piece of metadata information is overkil, but when we add them up all together it definitely makes sense. We've been postponing that API for some time now, it's in my opinion time to work on it :-) > It's actually quite rare that bits are added here, so I am OK with this > myself. > > I will produce an RFCv2 though (the current API doesn't really extend to > 1080p motion detection due to the limited number of blocks), and I will > take another look at this. Although I don't really know off-hand how to > implement it. One idea that I had (just a brainstorm at this moment) is to > associate V4L2 events with a buffer. So internally buffers would have an > event queue and events could be added there once the driver is done with > the buffer. > > An event buffer flag would be set, signalling to userspace that events are > available for this buffer and DQEVENT can be used to determine which events > there are (e.g. a motion detection event). > > This makes it easy to associate many types of event with a buffer (motion > detection, face/smile/whatever detection) using standard ioctls, but it > feels a bit convoluted at the same time. It's probably worth pursuing, > though, as it is nicely generic. It's an interesting idea, but maybe a bit convoluted as you mentioned. What about using a metadata plane ? Alternatively we could add a metadata flag and turn the two reserved fields into a metadata buffer pointer. Or add ioctls to retrieve the metadata buffer associated with a v4l2_buffer (those are rough ideas as well). > An alternative might be to set a 'DETECT' buffer flag, and rename > 'reserved2' to 'detect_mask', thus having up to 32 things to detect. The > problem with that is that we have no idea yet how to do face detection or > any other type of detection since we have no experience with it at all. So > 32 bits may also be insufficient, and I'd rather not use up a full field. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
