From: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
For NV12 format, even if display data is single image,
both VIDWIN0 and VIDWIN1 parameters must be used. The start
address of Y data plane and C data plane is configured in
VIDEOWIN0ADH/L and VIDEOWIN1ADH/L respectively.
cuurently only one layer was requested, which is suffice
for yuv422, but for yuv420(NV12) two layers are required and
fix the same by requesting for other layer if pix fmt is NV12
during set_fmt.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
---
drivers/media/platform/davinci/vpbe_display.c | 16 ++++++++++++++++
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c
index 0341dcc..f2ee07b 100644
--- a/drivers/media/platform/davinci/vpbe_display.c
+++ b/drivers/media/platform/davinci/vpbe_display.c
@@ -922,6 +922,22 @@ static int vpbe_display_s_fmt(struct file *file, void *priv,
other video window */
layer->pix_fmt = *pixfmt;
+ if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12 &&
+ cpu_is_davinci_dm365()) {
+ struct vpbe_layer *otherlayer;
+
+ otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer);
+ /* if other layer is available, only
+ * claim it, do not configure it
+ */
+ ret = osd_device->ops.request_layer(osd_device,
+ otherlayer->layer_info.id);
+ if (ret < 0) {
+ v4l2_err(&vpbe_dev->v4l2_dev,
+ "Display Manager failed to allocate layer\n");
+ return -EBUSY;
+ }
+ }
/* Get osd layer config */
osd_device->ops.get_layer_config(osd_device,
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
