Re: [PATCH V2 3/3] saa7115: Add register setup and config for gm7113c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 02, 2013 at 11:24:07PM -0300, Ezequiel Garcia wrote:
> On Mon, Apr 29, 2013 at 10:41:09PM +0200, Jon Arne Jørgensen wrote:
> > 
> > Signed-off-by: Jon Arne Jørgensen <jonarne@xxxxxxxxxx>
> 
> Every patch *must* have a proper commit message indicating what you're doing
> and why you're doing it.
> 
> In particular, please add as much information as you can about this new clone decoder.
> 
> If you know *why* we have to add those quirks for PAL and NTSC, it would
> be nice to add that information to the commit message and maybe even
> in a comment somewhere in the code.
>

I'll fix this, I rushed this patch and wasn't sure about what to write.
 
> > ---
> >  drivers/media/i2c/saa7115.c | 48 ++++++++++++++++++++++++++++++++++++---------
> >  1 file changed, 39 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
> > index eb2c19d..77c13dc 100644
> > --- a/drivers/media/i2c/saa7115.c
> > +++ b/drivers/media/i2c/saa7115.c
> > @@ -126,6 +126,8 @@ static int saa711x_has_reg(const int id, const u8 reg)
> >  		return 0;
> >  
> >  	switch (id) {
> > +	case V4L2_IDENT_GM7113C:
> > +		return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && reg < 0x20;
> >  	case V4L2_IDENT_SAA7113:
> >  		return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) &&
> >  		       reg != 0x5d && reg < 0x63;
> > @@ -447,6 +449,30 @@ static const unsigned char saa7115_cfg_50hz_video[] = {
> >  
> >  /* ============== SAA7715 VIDEO templates (end) =======  */
> >  
> > +/* ============== GM7113C VIDEO templates =============  */
> > +static const unsigned char gm7113c_cfg_60hz_video[] = {
> > +	R_08_SYNC_CNTL, 0x68,			/* 0xBO: auto detection, 0x68 = NTSC */
> > +	R_0E_CHROMA_CNTL_1, 0x07,		/* video autodetection is on */
> > +
> > +#if 0
> > +	R_5A_V_OFF_FOR_SLICER, 0x06,		/* standard 60hz value for ITU656 line counting */
> > +#endif
> 
> What's the meaning of this ifdef? In general it's better to remove dead
> code, or at least to put some fat comment about it.
> 

The gm7113c doesn't care about registers after 0x1f, I had to test that
this wasn't needed and forgot to remove the dead code before submitting.

I shall fix this also :)

> > +	0x00, 0x00
> > +};
> > +
> > +static const unsigned char gm7113c_cfg_50hz_video[] = {
> > +	R_08_SYNC_CNTL, 0x28,			/* 0x28 = PAL */
> > +	R_0E_CHROMA_CNTL_1, 0x07,
> > +
> > +#if 0
> > +	R_5A_V_OFF_FOR_SLICER, 0x03,		/* standard 50hz value */
> > +#endif
> 
> Ditto.
> 
> I've tested this with an stk1160/gm7113c device and now
> it's working fine (NTSC, PAL-M, PAL-Nc).
> 
> I also tested against regressions using stk1160/saa7113 and
> em28xx/saa7115 devices.
> 
> I must admit I'm quite happy to have this issue finally fixed!
> 
> Could you please re-send the whole series, taking account of this
> comments. You can add my:
> 
> Tested-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
> 
> to every patch in the series.
> 

Great, thanks.

> Thanks!
> -- 
> Ezequiel García, Free Electrons
> Embedded Linux, Kernel and Android Engineering
> http://free-electrons.com
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux