Hi Hans,
Thank you for the review.
Hans Verkuil wrote:
+#include <media/v4l2-chip-ident.h>
This include should be removed as well.
ok
+
+static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+ struct ml86v7667_priv *priv = to_ml86v7667(sd);
+
+ *std = priv->std;
That's not right. querystd should attempt to detect the standard, that's
what it is for. It should just return the detected standard, not actually
change it.
Ok.
I've mixed the things up with your review on removing the autoselection
feature and detection.
Thx for pointing on this.
+ */
+ val = i2c_smbus_read_byte_data(client, STATUS_REG);
+ if (val < 0)
+ return val;
+
+ priv->std = val & STATUS_NTSCPAL ? V4L2_STD_PAL : V4L2_STD_NTSC;
Shouldn't this be 50 Hz vs 60 Hz formats? There are 60 Hz PAL standards
and usually these devices detect 50 Hz vs 60 Hz, not NTSC vs PAL.
In the reference manual it is not mentioned about 50/60Hz input format
selection/detection but it mentioned just PAL/NTSC.
The 50hz formats can be ether PAL and NTSC formats variants. The same is
applied to 60Hz.
In the ML86V7667 datasheet the description for STATUS register detection
bit is just PAL/NTSC:
" $2C/STATUS [2] NTSC/PAL identification 0: NTSC /1: PAL "
If you assure me that I must judge their description as 50 vs 60Hz
formats and not PAL/NTSC then I will make the change.
Regards,
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html