This driver was written from scratch, based on an existing driver that it is part of rtl-sdr git tree, released under GPLv2: https://groups.google.com/forum/#!topic/ultra-cheap-sdr/Y3rBEOFtHug https://github.com/n1gp/gr-baz http://cgit.osmocom.org/rtl-sdr/plain/src/tuner_r820t.c (there are also other variants of it out there) >From what I understood from the threads, the original driver was converted to userspace from a Realtek tree. I couldn't find the original tree. However, the original driver look awkward on my eyes. So, I decided to write a new version from it from the scratch, while trying to reproduce everything found there. TODO: - After locking, the original driver seems to have some routines to improve reception. This was not implemented here yet. - RF Gain set/get is not implemented. Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> --- drivers/media/tuners/Kconfig | 7 + drivers/media/tuners/Makefile | 1 + drivers/media/tuners/r820t.c | 1486 +++++++++++++++++++++++++++++++++++++++++ drivers/media/tuners/r820t.h | 55 ++ 4 files changed, 1549 insertions(+) create mode 100644 drivers/media/tuners/r820t.c create mode 100644 drivers/media/tuners/r820t.h diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig index e8fdf71..d434903 100644 --- a/drivers/media/tuners/Kconfig +++ b/drivers/media/tuners/Kconfig @@ -241,4 +241,11 @@ config MEDIA_TUNER_TUA9001 default m if !MEDIA_SUBDRV_AUTOSELECT help Infineon TUA 9001 silicon tuner driver. + +config MEDIA_TUNER_R820T + tristate "Rafael Micro R820T silicon tuner" + depends on MEDIA_SUPPORT && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Rafael Micro R820T silicon tuner driver. endmenu diff --git a/drivers/media/tuners/Makefile b/drivers/media/tuners/Makefile index 5e569b1..7ec48f2 100644 --- a/drivers/media/tuners/Makefile +++ b/drivers/media/tuners/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_MEDIA_TUNER_TUA9001) += tua9001.o obj-$(CONFIG_MEDIA_TUNER_FC0011) += fc0011.o obj-$(CONFIG_MEDIA_TUNER_FC0012) += fc0012.o obj-$(CONFIG_MEDIA_TUNER_FC0013) += fc0013.o +obj-$(CONFIG_MEDIA_TUNER_R820T) += r820t.o ccflags-y += -I$(srctree)/drivers/media/dvb-core ccflags-y += -I$(srctree)/drivers/media/dvb-frontends diff --git a/drivers/media/tuners/r820t.c b/drivers/media/tuners/r820t.c new file mode 100644 index 0000000..7e02920 --- /dev/null +++ b/drivers/media/tuners/r820t.c @@ -0,0 +1,1486 @@ +/* + * Rafael Micro R820T driver + * + * Copyright (C) 2013 Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> + * + * This driver was written from scratch, based on an existing driver + * that it is part of rtl-sdr git tree, released under GPLv2: + * https://groups.google.com/forum/#!topic/ultra-cheap-sdr/Y3rBEOFtHug + * https://github.com/n1gp/gr-baz + * + * From what I understood from the threads, the original driver was converted + * to userspace from a Realtek tree. I couldn't find the original tree. + * However, the original driver look awkward on my eyes. So, I decided to + * write a new version from it from the scratch, while trying to reproduce + * everything found there. + * + * TODO: + * After locking, the original driver seems to have some routines to + * improve reception. This was not implemented here yet. + * + * RF Gain set/get is not implemented. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/videodev2.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include "tuner-i2c.h" +#include <asm/div64.h> +#include "r820t.h" + +/* + * FIXME: I think that there are only 32 registers, but better safe than + * sorry. After finishing the driver, we may review it. + */ +#define REG_SHADOW_START 5 +#define NUM_REGS 27 + +#define VER_NUM 49 + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable verbose debug messages"); + +/* + * enums and structures + */ + +enum xtal_cap_value { + XTAL_LOW_CAP_30P = 0, + XTAL_LOW_CAP_20P, + XTAL_LOW_CAP_10P, + XTAL_LOW_CAP_0P, + XTAL_HIGH_CAP_0P +}; + +struct r820t_priv { + struct list_head hybrid_tuner_instance_list; + const struct r820t_config *cfg; + struct tuner_i2c_props i2c_props; + struct mutex lock; + + u8 regs[NUM_REGS]; + u8 buf[NUM_REGS + 1]; + enum xtal_cap_value xtal_cap_sel; + u16 pll; /* kHz */ + u32 int_freq; + u8 fil_cal_code; + bool imr_done; + + /* Store current mode */ + u32 delsys; + enum v4l2_tuner_type type; + v4l2_std_id std; + u32 bw; /* in MHz */ + + bool has_lock; +}; + +struct r820t_freq_range { + u32 freq; + u8 open_d; + u8 rf_mux_ploy; + u8 tf_c; + u8 xtal_cap20p; + u8 xtal_cap10p; + u8 xtal_cap0p; + u8 imr_mem; /* Not used, currently */ +}; + +#define VCO_POWER_REF 0x02 + +/* + * Static constants + */ + +static LIST_HEAD(hybrid_tuner_instance_list); +static DEFINE_MUTEX(r820t_list_mutex); + +/* Those initial values start from REG_SHADOW_START */ +static const u8 r820t_init_array[NUM_REGS] = { + 0x83, 0x32, 0x75, /* 05 to 07 */ + 0xc0, 0x40, 0xd6, 0x6c, /* 08 to 0b */ + 0xf5, 0x63, 0x75, 0x68, /* 0c to 0f */ + 0x6c, 0x83, 0x80, 0x00, /* 10 to 13 */ + 0x0f, 0x00, 0xc0, 0x30, /* 14 to 17 */ + 0x48, 0xcc, 0x60, 0x00, /* 18 to 1b */ + 0x54, 0xae, 0x4a, 0xc0 /* 1c to 1f */ +}; + +/* Tuner frequency ranges */ +static const struct r820t_freq_range freq_ranges[] = { + { + .freq = 0, + .open_d = 0x08, /* low */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0xdf, /* R27[7:0] band2,band0 */ + .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 50, /* Start freq, in MHz */ + .open_d = 0x08, /* low */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0xbe, /* R27[7:0] band4,band1 */ + .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 55, /* Start freq, in MHz */ + .open_d = 0x08, /* low */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x8b, /* R27[7:0] band7,band4 */ + .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 60, /* Start freq, in MHz */ + .open_d = 0x08, /* low */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x7b, /* R27[7:0] band8,band4 */ + .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 65, /* Start freq, in MHz */ + .open_d = 0x08, /* low */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x69, /* R27[7:0] band9,band6 */ + .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 70, /* Start freq, in MHz */ + .open_d = 0x08, /* low */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x58, /* R27[7:0] band10,band7 */ + .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 75, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x44, /* R27[7:0] band11,band11 */ + .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 80, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x44, /* R27[7:0] band11,band11 */ + .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 90, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x34, /* R27[7:0] band12,band11 */ + .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 100, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x34, /* R27[7:0] band12,band11 */ + .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 0, + }, { + .freq = 110, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x24, /* R27[7:0] band13,band11 */ + .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 1, + }, { + .freq = 120, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x24, /* R27[7:0] band13,band11 */ + .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 1, + }, { + .freq = 140, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x14, /* R27[7:0] band14,band11 */ + .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ + .xtal_cap10p = 0x01, + .xtal_cap0p = 0x00, + .imr_mem = 1, + }, { + .freq = 180, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x13, /* R27[7:0] band14,band12 */ + .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ + .xtal_cap10p = 0x00, + .xtal_cap0p = 0x00, + .imr_mem = 1, + }, { + .freq = 220, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x13, /* R27[7:0] band14,band12 */ + .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ + .xtal_cap10p = 0x00, + .xtal_cap0p = 0x00, + .imr_mem = 2, + }, { + .freq = 250, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x11, /* R27[7:0] highest,highest */ + .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ + .xtal_cap10p = 0x00, + .xtal_cap0p = 0x00, + .imr_mem = 2, + }, { + .freq = 280, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ + .tf_c = 0x00, /* R27[7:0] highest,highest */ + .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ + .xtal_cap10p = 0x00, + .xtal_cap0p = 0x00, + .imr_mem = 2, + }, { + .freq = 310, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */ + .tf_c = 0x00, /* R27[7:0] highest,highest */ + .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ + .xtal_cap10p = 0x00, + .xtal_cap0p = 0x00, + .imr_mem = 2, + }, { + .freq = 450, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */ + .tf_c = 0x00, /* R27[7:0] highest,highest */ + .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ + .xtal_cap10p = 0x00, + .xtal_cap0p = 0x00, + .imr_mem = 3, + }, { + .freq = 588, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */ + .tf_c = 0x00, /* R27[7:0] highest,highest */ + .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ + .xtal_cap10p = 0x00, + .xtal_cap0p = 0x00, + .imr_mem = 3, + }, { + .freq = 650, /* Start freq, in MHz */ + .open_d = 0x00, /* high */ + .rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */ + .tf_c = 0x00, /* R27[7:0] highest,highest */ + .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ + .xtal_cap10p = 0x00, + .xtal_cap0p = 0x00, + .imr_mem = 4, + } +}; + +static int r820t_xtal_capacitor[][2] = { + { 0x0b, XTAL_LOW_CAP_30P }, + { 0x02, XTAL_LOW_CAP_20P }, + { 0x01, XTAL_LOW_CAP_10P }, + { 0x00, XTAL_LOW_CAP_0P }, + { 0x10, XTAL_HIGH_CAP_0P }, +}; + +/* + * I2C read/write code and shadow registers logic + */ +static void shadow_store(struct r820t_priv *priv, u8 reg, const u8 *val, + int len) +{ + int r = reg - REG_SHADOW_START; + + if (r < 0) { + len += r; + r = 0; + } + if (len <= 0) + return; + if (len > NUM_REGS) + len = NUM_REGS; + + tuner_dbg("%s: prev reg=%02x len=%d: %*ph\n", + __func__, r + REG_SHADOW_START, len, len, val); + + memcpy(&priv->regs[r], val, len); +} + +static int r820t_write(struct r820t_priv *priv, u8 reg, const u8 *val, + int len) +{ + int rc, size, pos = 0; + + /* Store the shadow registers */ + shadow_store(priv, reg, val, len); + + do { + if (len > priv->cfg->max_i2c_msg_len - 1) + size = priv->cfg->max_i2c_msg_len - 1; + else + size = len; + + /* Fill I2C buffer */ + priv->buf[0] = reg; + memcpy(&priv->buf[1], &val[pos], size); + + rc = tuner_i2c_xfer_send(&priv->i2c_props, priv->buf, size + 1); + if (rc != size + 1) { + tuner_info("%s: i2c wr failed=%d reg=%02x len=%d: %*ph\n", + __func__, rc, reg, size, size, &priv->buf[1]); + if (rc < 0) + return rc; + return -EREMOTEIO; + } + tuner_dbg("%s: i2c wr reg=%02x len=%d: %*ph\n", + __func__, reg, size, size, &priv->buf[1]); + + reg += size; + len -= size; + pos += size; + } while (len > 0); + + return 0; +} + +static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val) +{ + return r820t_write(priv, reg, &val, 1); +} + +static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val, + u8 bit_mask) +{ + int r = reg - REG_SHADOW_START; + + if (r >= 0 && r < NUM_REGS) + val = (priv->regs[r] & ~bit_mask) | (val & bit_mask); + else + return -EINVAL; + + return r820t_write(priv, reg, &val, 1); +} + +static int r820_read(struct r820t_priv *priv, u8 reg, u8 *val, int len) +{ + int rc; + u8 *p = &priv->buf[1]; + + priv->buf[0] = reg; + + rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, priv->buf, 1, p, len); + if (rc != len) { + tuner_info("%s: i2c rd failed=%d reg=%02x len=%d: %*ph\n", + __func__, rc, reg, len, len, p); + if (rc < 0) + return rc; + return -EREMOTEIO; + } + tuner_dbg("%s: i2c rd reg=%02x len=%d: %*ph\n", + __func__, reg, len, len, p); + + /* Copy data to the output buffer */ + memcpy(val, p, len); + + return 0; +} + +/* + * r820t tuning logic + */ + +static int r820t_set_mux(struct r820t_priv *priv, u32 freq) +{ + const struct r820t_freq_range *range; + int i, rc; + u8 val; + + /* Get the proper frequency range */ + freq = freq / 1000000; + for (i = 0; i < ARRAY_SIZE(freq_ranges) - 1; i++) { + if (freq < freq_ranges[i + 1].freq) + break; + } + range = &freq_ranges[i]; + + tuner_dbg("set r820t range#%d for frequency %d MHz\n", i, freq); + + /* Open Drain */ + rc = r820t_write_reg_mask(priv, 0x17, range->open_d, 0x08); + if (rc < 0) + return rc; + + /* RF_MUX,Polymux */ + rc = r820t_write_reg_mask(priv, 0x1a, range->rf_mux_ploy, 0xc3); + if (rc < 0) + return rc; + + /* TF BAND */ + rc = r820t_write_reg(priv, 0x1b, range->tf_c); + if (rc < 0) + return rc; + + /* XTAL CAP & Drive */ + switch (priv->xtal_cap_sel) { + case XTAL_LOW_CAP_30P: + case XTAL_LOW_CAP_20P: + val = range->xtal_cap20p | 0x08; + break; + case XTAL_LOW_CAP_10P: + val = range->xtal_cap10p | 0x08; + break; + case XTAL_HIGH_CAP_0P: + val = range->xtal_cap0p | 0x00; + break; + default: + case XTAL_LOW_CAP_0P: + val = range->xtal_cap0p | 0x08; + break; + } + rc = r820t_write_reg_mask(priv, 0x10, val, 0x0b); + if (rc < 0) + return rc; + + /* + * FIXME: the original driver has a logic there with preserves + * gain/phase from registers 8 and 9 reading the data from the + * registers before writing, if "IMF done". That code was sort of + * commented there, as the flag is always false. + */ + rc = r820t_write_reg_mask(priv, 0x08, 0, 0x3f); + if (rc < 0) + return rc; + + rc = r820t_write_reg_mask(priv, 0x09, 0, 0x3f); + + return rc; +} + +static int r820t_set_pll(struct r820t_priv *priv, u32 freq) +{ + u64 tmp64, vco_freq; + int rc, i; + u32 vco_fra; /* VCO contribution by SDM (kHz) */ + u32 vco_min = 1770000; + u32 vco_max = vco_min * 2; + u32 pll_ref; + u16 n_sdm = 2; + u16 sdm = 0; + u8 mix_div = 2; + u8 div_buf = 0; + u8 div_num = 0; + u8 ni, si, nint, vco_fine_tune, val; + u8 data[5]; + + freq = freq / 1000; /* Frequency in kHz */ + + pll_ref = priv->cfg->xtal / 1000; + + tuner_dbg("set r820t pll for frequency %d kHz = %d\n", freq, pll_ref); + + /* FIXME: this seems to be a hack - probably it can be removed */ + rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x00); + if (rc < 0) + return rc; + + /* set pll autotune = 128kHz */ + rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c); + if (rc < 0) + return rc; + + /* set VCO current = 100 */ + rc = r820t_write_reg_mask(priv, 0x12, 0x80, 0xe0); + if (rc < 0) + return rc; + + /* Calculate divider */ + while (mix_div <= 64) { + if (((freq * mix_div) >= vco_min) && + ((freq * mix_div) < vco_max)) { + div_buf = mix_div; + while (div_buf > 2) { + div_buf = div_buf >> 1; + div_num++; + } + break; + } + mix_div = mix_div << 1; + } + + rc = r820_read(priv, 0x00, data, sizeof(data)); + if (rc < 0) + return rc; + + vco_fine_tune = (data[4] & 0x30) >> 4; + + if (vco_fine_tune > VCO_POWER_REF) + div_num = div_num - 1; + else if (vco_fine_tune < VCO_POWER_REF) + div_num = div_num + 1; + + rc = r820t_write_reg_mask(priv, 0x10, div_num << 5, 0xe0); + if (rc < 0) + return rc; + + vco_freq = (u64)(freq * (u64)mix_div); + + tmp64 = vco_freq; + do_div(tmp64, 2 * pll_ref); + nint = (u8)tmp64; + + tmp64 = vco_freq - ((u64)2) * pll_ref * nint; + do_div(tmp64, 1000); + vco_fra = (u16)(tmp64); + + pll_ref /= 1000; + + /* boundary spur prevention */ + if (vco_fra < pll_ref / 64) { + vco_fra = 0; + } else if (vco_fra > pll_ref * 127 / 64) { + vco_fra = 0; + nint++; + } else if ((vco_fra > pll_ref * 127 / 128) && (vco_fra < pll_ref)) { + vco_fra = pll_ref * 127 / 128; + } else if ((vco_fra > pll_ref) && (vco_fra < pll_ref * 129 / 128)) { + vco_fra = pll_ref * 129 / 128; + } + + if (nint > 63) { + tuner_info("No valid PLL values for %u kHz!\n", freq); + return -EINVAL; + } + + ni = (nint - 13) / 4; + si = nint - 4 * ni - 13; + + rc = r820t_write_reg(priv, 0x14, ni + (si << 6)); + if (rc < 0) + return rc; + + /* pw_sdm */ + if (!vco_fra) + val = 0x08; + else + val = 0x00; + + rc = r820t_write_reg_mask(priv, 0x12, val, 0x08); + if (rc < 0) + return rc; + + /* sdm calculator */ + while (vco_fra > 1) { + if (vco_fra > (2 * pll_ref / n_sdm)) { + sdm = sdm + 32768 / (n_sdm / 2); + vco_fra = vco_fra - 2 * pll_ref / n_sdm; + if (n_sdm >= 0x8000) + break; + } + n_sdm = n_sdm << 1; + } + + rc = r820t_write_reg_mask(priv, 0x16, sdm >> 8, 0x08); + if (rc < 0) + return rc; + rc = r820t_write_reg_mask(priv, 0x15, sdm & 0xff, 0x08); + if (rc < 0) + return rc; + + for (i = 0; i < 2; i++) { + /* + * FIXME: Rafael chips R620D, R828D and R828 seems to + * need 20 ms for analog TV + */ + msleep(10); + + /* Check if PLL has locked */ + rc = r820_read(priv, 0x00, data, 3); + if (rc < 0) + return rc; + if (data[2] & 0x40) + break; + + if (!i) { + /* Didn't lock. Increase VCO current */ + rc = r820t_write_reg_mask(priv, 0x12, 0x60, 0xe0); + if (rc < 0) + return rc; + } + } + + if (!(data[2] & 0x40)) { + priv->has_lock = false; + return 0; + } + + priv->has_lock = true; + tuner_dbg("tuner has lock at frequency %d kHz\n", freq); + + /* set pll autotune = 8kHz */ + rc = r820t_write_reg_mask(priv, 0x1a, 0x08, 0x08); + + return rc; +} + +static int r820t_sysfreq_sel(struct r820t_priv *priv, u32 freq, + enum v4l2_tuner_type type, + v4l2_std_id std, + u32 delsys) +{ + int rc; + u8 mixer_top, lna_top, cp_cur, div_buf_cur, lna_vth_l, mixer_vth_l; + u8 air_cable1_in, cable2_in, pre_dect, lna_discharge, filter_cur; + + tuner_dbg("adjusting tuner parameters for the standard\n"); + + switch (delsys) { + case SYS_DVBT: + if ((freq == 506000000) || (freq == 666000000) || + (freq == 818000000)) { + mixer_top = 0x14; /* mixer top:14 , top-1, low-discharge */ + lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ + cp_cur = 0x28; /* 101, 0.2 */ + div_buf_cur = 0x20; /* 10, 200u */ + } else { + mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ + lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ + cp_cur = 0x38; /* 111, auto */ + div_buf_cur = 0x30; /* 11, 150u */ + } + lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ + mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ + air_cable1_in = 0x00; + cable2_in = 0x00; + pre_dect = 0x40; + lna_discharge = 14; + filter_cur = 0x40; /* 10, low */ + break; + case SYS_DVBT2: + mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ + lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ + lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ + mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ + air_cable1_in = 0x00; + cable2_in = 0x00; + pre_dect = 0x40; + lna_discharge = 14; + cp_cur = 0x38; /* 111, auto */ + div_buf_cur = 0x30; /* 11, 150u */ + filter_cur = 0x40; /* 10, low */ + break; + case SYS_ISDBT: + mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ + lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ + lna_vth_l = 0x75; /* lna vth 1.04 , vtl 0.84 */ + mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ + air_cable1_in = 0x00; + cable2_in = 0x00; + pre_dect = 0x40; + lna_discharge = 14; + cp_cur = 0x38; /* 111, auto */ + div_buf_cur = 0x30; /* 11, 150u */ + filter_cur = 0x40; /* 10, low */ + break; + default: /* DVB-T 8M */ + mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ + lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ + lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ + mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ + air_cable1_in = 0x00; + cable2_in = 0x00; + pre_dect = 0x40; + lna_discharge = 14; + cp_cur = 0x38; /* 111, auto */ + div_buf_cur = 0x30; /* 11, 150u */ + filter_cur = 0x40; /* 10, low */ + break; + } + + rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0xc7); + if (rc < 0) + return rc; + rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0xf8); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x0d, lna_vth_l); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x0e, mixer_vth_l); + if (rc < 0) + return rc; + + /* Air-IN only for Astrometa */ + rc = r820t_write_reg_mask(priv, 0x05, air_cable1_in, 0x60); + if (rc < 0) + return rc; + rc = r820t_write_reg_mask(priv, 0x06, cable2_in, 0x08); + if (rc < 0) + return rc; + + rc = r820t_write_reg_mask(priv, 0x11, cp_cur, 0x38); + if (rc < 0) + return rc; + rc = r820t_write_reg_mask(priv, 0x17, div_buf_cur, 0x30); + if (rc < 0) + return rc; + rc = r820t_write_reg_mask(priv, 0x0a, filter_cur, 0x60); + if (rc < 0) + return rc; + /* + * Original driver initializes regs 0x05 and 0x06 with the + * same value again on this point. Probably, it is just an + * error there + */ + + /* + * Set LNA + */ + + tuner_dbg("adjusting LNA parameters\n"); + if (type != V4L2_TUNER_ANALOG_TV) { + /* LNA TOP: lowest */ + rc = r820t_write_reg_mask(priv, 0x1d, 0, 0x38); + if (rc < 0) + return rc; + + /* 0: normal mode */ + rc = r820t_write_reg_mask(priv, 0x1c, 0, 0x04); + if (rc < 0) + return rc; + + /* 0: PRE_DECT off */ + rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40); + if (rc < 0) + return rc; + + /* agc clk 250hz */ + rc = r820t_write_reg_mask(priv, 0x1a, 0x30, 0x30); + if (rc < 0) + return rc; + + msleep(250); + + /* write LNA TOP = 3 */ + rc = r820t_write_reg_mask(priv, 0x1d, 0x18, 0x38); + if (rc < 0) + return rc; + + /* + * write discharge mode + * FIXME: IMHO, the mask here is wrong, but it matches + * what's there at the original driver + */ + rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04); + if (rc < 0) + return rc; + + /* LNA discharge current */ + rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f); + if (rc < 0) + return rc; + + /* agc clk 60hz */ + rc = r820t_write_reg_mask(priv, 0x1a, 0x20, 0x30); + if (rc < 0) + return rc; + } else { + /* PRE_DECT off */ + rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40); + if (rc < 0) + return rc; + + /* write LNA TOP */ + rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0x38); + if (rc < 0) + return rc; + + /* + * write discharge mode + * FIXME: IMHO, the mask here is wrong, but it matches + * what's there at the original driver + */ + rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04); + if (rc < 0) + return rc; + + /* LNA discharge current */ + rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f); + if (rc < 0) + return rc; + + /* agc clk 1Khz, external det1 cap 1u */ + rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x30); + if (rc < 0) + return rc; + + rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x04); + if (rc < 0) + return rc; + } + return 0; +} + +static int r820t_set_tv_standard(struct r820t_priv *priv, + unsigned bw, + enum v4l2_tuner_type type, + v4l2_std_id std, u32 delsys) + +{ + int rc, i; + u32 if_khz, filt_cal_lo; + u8 data[5], val; + u8 filt_gain, img_r, filt_q, hp_cor, ext_enable, loop_through; + u8 lt_att, flt_ext_widest, polyfil_cur; + bool need_calibration; + + tuner_dbg("selecting the delivery system\n"); + + if (delsys == SYS_ISDBT) { + if_khz = 4063; + filt_cal_lo = 59000; + filt_gain = 0x10; /* +3db, 6mhz on */ + img_r = 0x00; /* image negative */ + filt_q = 0x10; /* r10[4]:low q(1'b1) */ + hp_cor = 0x6a; /* 1.7m disable, +2cap, 1.25mhz */ + ext_enable = 0x40; /* r30[6], ext enable; r30[5]:0 ext at lna max */ + loop_through = 0x00; /* r5[7], lt on */ + lt_att = 0x00; /* r31[7], lt att enable */ + flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ + polyfil_cur = 0x60; /* r25[6:5]:min */ + } else { + if (bw <= 6) { + if_khz = 3570; + filt_cal_lo = 56000; /* 52000->56000 */ + filt_gain = 0x10; /* +3db, 6mhz on */ + img_r = 0x00; /* image negative */ + filt_q = 0x10; /* r10[4]:low q(1'b1) */ + hp_cor = 0x6b; /* 1.7m disable, +2cap, 1.0mhz */ + ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ + loop_through = 0x00; /* r5[7], lt on */ + lt_att = 0x00; /* r31[7], lt att enable */ + flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ + polyfil_cur = 0x60; /* r25[6:5]:min */ + } else if (bw == 7) { + if_khz = 4070; + filt_cal_lo = 60000; + filt_gain = 0x10; /* +3db, 6mhz on */ + img_r = 0x00; /* image negative */ + filt_q = 0x10; /* r10[4]:low q(1'b1) */ + hp_cor = 0x2b; /* 1.7m disable, +1cap, 1.0mhz */ + ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ + loop_through = 0x00; /* r5[7], lt on */ + lt_att = 0x00; /* r31[7], lt att enable */ + flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ + polyfil_cur = 0x60; /* r25[6:5]:min */ +#if 0 /* 7 MHz type 2 - nor sure why/where this is used - Perhaps Australia? */ + if_khz = 4570; + filt_cal_lo = 63000; + filt_gain = 0x10; /* +3db, 6mhz on */ + img_r = 0x00; /* image negative */ + filt_q = 0x10; /* r10[4]:low q(1'b1) */ + hp_cor = 0x2a; /* 1.7m disable, +1cap, 1.25mhz */ + ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ + loop_through = 0x00; /* r5[7], lt on */ + lt_att = 0x00; /* r31[7], lt att enable */ + flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ + polyfil_cur = 0x60; /* r25[6:5]:min */ +#endif + } else { + if_khz = 4570; + filt_cal_lo = 68500; + filt_gain = 0x10; /* +3db, 6mhz on */ + img_r = 0x00; /* image negative */ + filt_q = 0x10; /* r10[4]:low q(1'b1) */ + hp_cor = 0x0b; /* 1.7m disable, +0cap, 1.0mhz */ + ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ + loop_through = 0x00; /* r5[7], lt on */ + lt_att = 0x00; /* r31[7], lt att enable */ + flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ + polyfil_cur = 0x60; /* r25[6:5]:min */ + } + } + + /* Initialize the shadow registers */ + memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); + + /* Init Flag & Xtal_check Result */ + if (priv->imr_done) + val = 1 | priv->xtal_cap_sel << 1; + else + val = 0; + rc = r820t_write_reg_mask(priv, 0x0c, val, 0x0f); + if (rc < 0) + return rc; + + /* version */ + rc = r820t_write_reg_mask(priv, 0x13, VER_NUM, 0x3f); + if (rc < 0) + return rc; + + /* for LT Gain test */ + if (type != V4L2_TUNER_ANALOG_TV) { + rc = r820t_write_reg_mask(priv, 0x1d, 0x00, 0x38); + if (rc < 0) + return rc; + msleep(1); + } + priv->int_freq = if_khz; + + /* Check if standard changed. If so, filter calibration is needed */ + if (type != priv->type) + need_calibration = true; + else if ((type == V4L2_TUNER_ANALOG_TV) && (std != priv->std)) + need_calibration = true; + else if ((type == V4L2_TUNER_DIGITAL_TV) && + ((delsys != priv->delsys) || bw != priv->bw)) + need_calibration = true; + else + need_calibration = false; + + if (need_calibration) { + tuner_dbg("calibrating the tuner\n"); + for (i = 0; i < 2; i++) { + /* Set filt_cap */ + rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x60); + if (rc < 0) + return rc; + + /* set cali clk =on */ + rc = r820t_write_reg_mask(priv, 0x0f, 0x04, 0x04); + if (rc < 0) + return rc; + + /* X'tal cap 0pF for PLL */ + rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x03); + if (rc < 0) + return rc; + + rc = r820t_set_pll(priv, filt_cal_lo); + if (rc < 0 || !priv->has_lock) + return rc; + + /* Start Trigger */ + rc = r820t_write_reg_mask(priv, 0x0b, 0x10, 0x10); + if (rc < 0) + return rc; + + msleep(1); + + /* Stop Trigger */ + rc = r820t_write_reg_mask(priv, 0x0b, 0x00, 0x10); + if (rc < 0) + return rc; + + /* set cali clk =off */ + rc = r820t_write_reg_mask(priv, 0x0f, 0x00, 0x04); + if (rc < 0) + return rc; + + /* Check if calibration worked */ + rc = r820_read(priv, 0x00, data, sizeof(data)); + if (rc < 0) + return rc; + + priv->fil_cal_code = data[4] & 0x0f; + if (priv->fil_cal_code && priv->fil_cal_code != 0x0f) + break; + } + /* narrowest */ + if (priv->fil_cal_code == 0x0f) + priv->fil_cal_code = 0; + } + + rc = r820t_write_reg_mask(priv, 0x0a, + filt_q | priv->fil_cal_code, 0x1f); + if (rc < 0) + return rc; + + /* Set BW, Filter_gain, & HP corner */ + rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x10); + if (rc < 0) + return rc; + + + /* Set Img_R */ + rc = r820t_write_reg_mask(priv, 0x07, img_r, 0x80); + if (rc < 0) + return rc; + + /* Set filt_3dB, V6MHz */ + rc = r820t_write_reg_mask(priv, 0x06, filt_gain, 0x30); + if (rc < 0) + return rc; + + /* channel filter extension */ + rc = r820t_write_reg_mask(priv, 0x1e, ext_enable, 0x60); + if (rc < 0) + return rc; + + /* Loop through */ + rc = r820t_write_reg_mask(priv, 0x05, loop_through, 0x80); + if (rc < 0) + return rc; + + /* Loop through attenuation */ + rc = r820t_write_reg_mask(priv, 0x1f, lt_att, 0x80); + if (rc < 0) + return rc; + + /* filter extension widest */ + rc = r820t_write_reg_mask(priv, 0x0f, flt_ext_widest, 0x80); + if (rc < 0) + return rc; + + /* RF poly filter current */ + rc = r820t_write_reg_mask(priv, 0x19, polyfil_cur, 0x60); + if (rc < 0) + return rc; + + /* Store current standard. If it changes, re-calibrate the tuner */ + priv->delsys = delsys; + priv->type = type; + priv->std = std; + priv->bw = bw; + + return 0; +} + +static int generic_set_freq(struct dvb_frontend *fe, + u32 freq /* in HZ */, + unsigned bw, + enum v4l2_tuner_type type, + v4l2_std_id std, u32 delsys) +{ + struct r820t_priv *priv = fe->tuner_priv; + int rc = -EINVAL; + u32 lo_freq; + + tuner_dbg("should set frequency to %d kHz, bw %d MHz\n", + freq / 1000, bw); + + mutex_lock(&priv->lock); + + if ((type == V4L2_TUNER_ANALOG_TV) && (std == V4L2_STD_SECAM_LC)) + lo_freq = freq - priv->int_freq; + else + lo_freq = freq + priv->int_freq; + + rc = r820t_set_tv_standard(priv, bw, type, std, delsys); + if (rc < 0) + goto err; + + rc = r820t_set_mux(priv, lo_freq); + if (rc < 0) + goto err; + rc = r820t_set_pll(priv, lo_freq); + if (rc < 0 || !priv->has_lock) + goto err; + + rc = r820t_sysfreq_sel(priv, freq, type, std, delsys); +err: + mutex_unlock(&priv->lock); + + if (rc < 0) + tuner_dbg("%s: failed=%d\n", __func__, rc); + return rc; +} + +/* + * r820t standby logic + */ + +static int r820t_standby(struct r820t_priv *priv) +{ + int rc; + + rc = r820t_write_reg(priv, 0x06, 0xb1); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x05, 0x03); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x07, 0x3a); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x08, 0x40); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x09, 0xc0); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x0a, 0x36); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x0c, 0x35); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x0f, 0x68); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x11, 0x03); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x17, 0xf4); + if (rc < 0) + return rc; + rc = r820t_write_reg(priv, 0x19, 0x0c); + + /* Force initial calibration */ + priv->type = -1; + + return rc; +} + +/* + * r820t device init logic + */ + +static int r820t_xtal_check(struct r820t_priv *priv) +{ + int rc, i; + u8 data[3], val; + + /* Initialize the shadow registers */ + memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); + + /* cap 30pF & Drive Low */ + rc = r820t_write_reg_mask(priv, 0x10, 0x0b, 0x0b); + if (rc < 0) + return rc; + + /* set pll autotune = 128kHz */ + rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c); + if (rc < 0) + return rc; + + /* set manual initial reg = 111111; */ + rc = r820t_write_reg_mask(priv, 0x13, 0x7f, 0x7f); + if (rc < 0) + return rc; + + /* set auto */ + rc = r820t_write_reg_mask(priv, 0x13, 0x00, 0x40); + if (rc < 0) + return rc; + + /* Try several xtal capacitor alternatives */ + for (i = 0; i < ARRAY_SIZE(r820t_xtal_capacitor); i++) { + rc = r820t_write_reg_mask(priv, 0x10, + r820t_xtal_capacitor[i][0], 0x1b); + if (rc < 0) + return rc; + + msleep(5); + + rc = r820_read(priv, 0x00, data, sizeof(data)); + if (rc < 0) + return rc; + if ((!data[2]) & 0x40) + continue; + + val = data[2] & 0x3f; + + if (priv->cfg->xtal == 16000000 && (val > 29 || val < 23)) + break; + + if (val != 0x3f) + break; + } + + if (i == ARRAY_SIZE(r820t_xtal_capacitor)) + return -EINVAL; + + return r820t_xtal_capacitor[i][1]; +} + +/* + * r820t frontend operations and tuner attach code + */ + +static int r820t_init(struct dvb_frontend *fe) +{ + struct r820t_priv *priv = fe->tuner_priv; + int rc, i; + int xtal_cap = 0; + + tuner_dbg("%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + mutex_lock(&priv->lock); + + if ((priv->cfg->rafael_chip == CHIP_R820T) || + (priv->cfg->rafael_chip == CHIP_R828S) || + (priv->cfg->rafael_chip == CHIP_R820C)) { + priv->xtal_cap_sel = XTAL_HIGH_CAP_0P; + } else { + for (i = 0; i < 3; i++) { + rc = r820t_xtal_check(priv); + if (rc < 0) + goto err; + if (!i || rc > xtal_cap) + xtal_cap = rc; + } + priv->xtal_cap_sel = xtal_cap; + } + + /* Initialize registers */ + rc = r820t_write(priv, 0x05, + r820t_init_array, sizeof(r820t_init_array)); + + mutex_unlock(&priv->lock); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return rc; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + tuner_dbg("%s: failed=%d\n", __func__, rc); + return rc; +} + +static int r820t_sleep(struct dvb_frontend *fe) +{ + struct r820t_priv *priv = fe->tuner_priv; + int rc; + + tuner_dbg("%s:\n", __func__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + mutex_lock(&priv->lock); + rc = r820t_standby(priv); + mutex_unlock(&priv->lock); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + tuner_dbg("%s: failed=%d\n", __func__, rc); + return rc; +} + +static int r820t_set_analog_freq(struct dvb_frontend *fe, + struct analog_parameters *p) +{ + struct r820t_priv *priv = fe->tuner_priv; + unsigned bw; + + tuner_dbg("%s called\n", __func__); + + /* if std is not defined, choose one */ + if (!p->std) + p->std = V4L2_STD_MN; + + if ((p->std == V4L2_STD_PAL_M) || (p->std == V4L2_STD_NTSC)) + bw = 6; + else + bw = 8; + + return generic_set_freq(fe, 62500l * p->frequency, bw, + V4L2_TUNER_ANALOG_TV, p->std, SYS_UNDEFINED); +} + +static int r820t_set_params(struct dvb_frontend *fe) +{ + struct r820t_priv *priv = fe->tuner_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc; + unsigned bw; + + tuner_dbg("%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n", + __func__, c->delivery_system, c->frequency, c->bandwidth_hz); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + bw = (c->bandwidth_hz + 500000) / 1000000; + if (!bw) + bw = 8; + + rc = generic_set_freq(fe, c->frequency, bw, + V4L2_TUNER_DIGITAL_TV, 0, c->delivery_system); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (rc) + tuner_dbg("%s: failed=%d\n", __func__, rc); + return rc; +} + +static int r820t_signal(struct dvb_frontend *fe, u16 *strength) +{ + struct r820t_priv *priv = fe->tuner_priv; + + if (priv->has_lock) + *strength = 0xffff; + else + *strength = 0; + + return 0; +} + +static int r820t_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct r820t_priv *priv = fe->tuner_priv; + + tuner_dbg("%s:\n", __func__); + + *frequency = priv->int_freq; + + return 0; +} + +static int r820t_release(struct dvb_frontend *fe) +{ + struct r820t_priv *priv = fe->tuner_priv; + + tuner_dbg("%s:\n", __func__); + + mutex_lock(&r820t_list_mutex); + + if (priv) + hybrid_tuner_release_state(priv); + + mutex_unlock(&r820t_list_mutex); + + fe->tuner_priv = NULL; + + kfree(fe->tuner_priv); + + return 0; +} + +static const struct dvb_tuner_ops r820t_tuner_ops = { + .info = { + .name = "Rafael Micro R820T", + .frequency_min = 42000000, + .frequency_max = 1002000000, + }, + .init = r820t_init, + .release = r820t_release, + .sleep = r820t_sleep, + .set_params = r820t_set_params, + .set_analog_params = r820t_set_analog_freq, + .get_if_frequency = r820t_get_if_frequency, + .get_rf_strength = r820t_signal, +}; + +struct dvb_frontend *r820t_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + const struct r820t_config *cfg) +{ + struct r820t_priv *priv; + int rc = -ENODEV; + u8 data[5]; + int instance; + + mutex_lock(&r820t_list_mutex); + + instance = hybrid_tuner_request_state(struct r820t_priv, priv, + hybrid_tuner_instance_list, + i2c, cfg->i2c_addr, + "r820t"); + switch (instance) { + case 0: + /* memory allocation failure */ + goto err_no_gate; + break; + case 1: + /* new tuner instance */ + priv->cfg = cfg; + + mutex_init(&priv->lock); + + fe->tuner_priv = priv; + break; + case 2: + /* existing tuner instance */ + fe->tuner_priv = priv; + break; + } + + memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops, sizeof(r820t_tuner_ops)); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + /* check if the tuner is there */ + rc = r820_read(priv, 0x00, data, sizeof(data)); + if (rc < 0) + goto err; + + rc = r820t_sleep(fe); + if (rc < 0) + goto err; + + tuner_info("Rafael Micro r820t successfully identified\n"); + + fe->tuner_priv = priv; + memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + mutex_unlock(&r820t_list_mutex); + + return fe; +err: + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + +err_no_gate: + mutex_unlock(&r820t_list_mutex); + + tuner_info("%s: failed=%d\n", __func__, rc); + r820t_release(fe); + return NULL; +} +EXPORT_SYMBOL_GPL(r820t_attach); + +MODULE_DESCRIPTION("Rafael Micro r820t silicon tuner driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/tuners/r820t.h b/drivers/media/tuners/r820t.h new file mode 100644 index 0000000..a64a7b6 --- /dev/null +++ b/drivers/media/tuners/r820t.h @@ -0,0 +1,55 @@ +/* + * Elonics R820T silicon tuner driver + * + * Copyright (C) 2012 Antti Palosaari <crope@xxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef R820T_H +#define R820T_H + +#include <linux/kconfig.h> +#include "dvb_frontend.h" + +enum r820t_chip { + CHIP_R820T, + CHIP_R828S, + CHIP_R820C, +}; + +struct r820t_config { + u8 i2c_addr; /* 0x34 */ + + u32 xtal; + enum r820t_chip rafael_chip; + unsigned max_i2c_msg_len; +}; + +#if IS_ENABLED(CONFIG_MEDIA_TUNER_R820T) +struct dvb_frontend *r820t_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + const struct r820t_config *cfg); +#else +static inline struct dvb_frontend *r820t_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + const struct r820t_config *cfg) +{ + pr_warn("%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif -- 1.8.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
