Back in September, 2011, Doron Cohen <doronc@xxxxxxxxxxxx> submitted a series of patches meant to add support for newer siano chipsets. That series of patches had several pointed issues: - It were just a diff from Siano's internal git tree and upstreamed one. Due to that, applying it would cause regressions; - Among the regressions, the newer code would break rc_core support, causing regressions for IR; - It also breaks support for Hauppauge devices with old firmware (version 2.1); - It added support for a Siano proprietary API. On that time, I waited for Doron to submit a newer patch series. Unfortunately, this never happened. As I received a sms2270 device, I decided to take some time to understand the changes proposed by Dohen, port the ones that are pertinent to upstream, and make it to work. I also took care to fix it for older devices. I also did a few clean ups on some bad things on it, and added an experimental debugfs support, to allow displaying the complete data inside the device's statistics reports. That helped to port it to use the new DVBv5 stats. There are still plenty of space to clean it up, like removing the CamelCase and cleaning its structures. I won't doubt that there are lots of unused stuff there at the core. Anyway, with this patchset, both Hauppauge model 55009 Rev B1F7-02D and an unbranded Siano Rio (187f:0600) device are working fine on a x86, via USB interface. I didn't test it with arm or with a big endian system. As nobody is currently maintaining this driver, I'm also adding a MAINTAINERS entry on this series, with "Odd fixes". Mauro Carvalho Chehab (46): [media] siano: Change GPIO voltage setting names [media] siano: Add the new voltage definitions for GPIO [media] siano: remove a duplicated structure definition [media] siano: update message macros [media] siano: better debug send/receive messages [media] siano: add the remaining new defines from new driver [media] siano: Properly initialize board information [media] siano: add additional attributes to cards entries [media] siano: use USB endpoint descriptors for in/out endp [media] siano: store firmware version [media] siano: make load firmware logic to work with newer firmwares [media] siano: report the choosed firmware in debug [media] siano: fix the debug message [media] siano: always load smsdvb [media] siano: cleanups at smscoreapi.c [media] siano: add some new messages to the smscoreapi [media] siano: use a separate completion for stats [media] siano: add support for ISDB-T full-seg [media] siano: add support for LNA on ISDB-T [media] siano: use the newer stats message for recent firmwares [media] siano: add new devices to the Siano Driver [media] siano: Configure board's mtu and xtal [media] siano: call MSG_SMS_INIT_DEVICE_REQ [media] siano: simplify message endianness logic [media] siano: split get_frontend into per-std functions [media] siano: split debug logic from the status update routine [media] siano: Convert it to report DVBv5 stats [media] siano: fix start of statistics [media] siano: allow showing the complete statistics via debugfs [media] siano: split debugfs code into a separate file [media] siano: add two missing fields to ISDB-T stats debugfs [media] siano: don't request statistics too fast [media] siano: fix signal strength and CNR stats measurements [media] siano: fix PER/BER report on DVBv5 [media] siano: Fix bandwidth report [media] siano: Only feed DVB data when there's a feed [media] siano: fix status report with old firmware and ISDB-T [media] siano: add support for .poll on debugfs [media] siano: simplify firmware lookup logic [media] siano: honour per-card default mode [media] siano: remove the bogus firmware lookup code [media] siano: reorder smscore_get_fw_filename() function [media] siano: add a MAINTAINERS entry for it [media] siano: remove a bogus printk line [media] siano: remove doubled new line [media] siano: Remove bogus complain about MSG_SMS_DVBT_BDA_DATA MAINTAINERS | 11 + drivers/media/common/siano/Kconfig | 12 + drivers/media/common/siano/Makefile | 5 + drivers/media/common/siano/sms-cards.c | 99 ++- drivers/media/common/siano/sms-cards.h | 14 + drivers/media/common/siano/smscoreapi.c | 918 +++++++++++++++----- drivers/media/common/siano/smscoreapi.h | 607 ++++++++++--- drivers/media/common/siano/smsdvb-debugfs.c | 554 ++++++++++++ drivers/media/common/siano/smsdvb-main.c | 1226 +++++++++++++++++++++++++++ drivers/media/common/siano/smsdvb.c | 1078 ----------------------- drivers/media/common/siano/smsdvb.h | 129 +++ drivers/media/mmc/siano/smssdio.c | 13 + drivers/media/usb/siano/smsusb.c | 130 ++- 13 files changed, 3373 insertions(+), 1423 deletions(-) create mode 100644 drivers/media/common/siano/smsdvb-debugfs.c create mode 100644 drivers/media/common/siano/smsdvb-main.c delete mode 100644 drivers/media/common/siano/smsdvb.c create mode 100644 drivers/media/common/siano/smsdvb.h -- 1.8.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
