Hi Hans Thank you for the prompt response. I will try this once I'm home again. Which patch is responsible for fixing it? Just so I can track it once it lands upstream. I have one more question - the wiki states the the WinTV-HVR-5500 is not yet supported (as of June 2011) - is there an update on this? It's the only DVB-C card I can buy in the local stores here Thank you Benjamin On 03/14/2013 07:57 AM, Hans Verkuil wrote: > On Thu March 14 2013 00:08:57 Benjamin Schindler wrote: >> Hi >> >> I recently upgraded from 3.2 to 3.7 and noticed, that I don't get any >> sound anymore from my TV-card. tvtime still works fine, just with no >> sound. As you can see from the snippet below, I have a hauppage WinTV >> card which uses msp3400 for sound > Yes, the bttv driver broke around that time and nobody noticed for a long > time :-( > > You can try to build the latest code using these instructions: > > http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers > > bttv should now be working again. > > Note that you may experience problems building cx231xx. Disable that driver > for now (run 'make menuconfig' in media_build). Hopefully the fix for that > cx231xx bug will be merged soon. > > Regards, > > Hans > >> Here are the relevant snippets from the dmesg: >> >> [ 3.539144] bttv: driver version 0.9.19 loaded >> [ 3.539147] bttv: using 8 buffers with 2080k (520 pages) each for capture >> [ 3.539169] bttv: Bt8xx card found (0) >> [ 3.539184] bttv: 0: Bt878 (rev 2) at 0000:07:01.0, irq: 17, latency: >> 32, mmio: 0xfbcff000 >> [ 3.539211] bttv: 0: detected: Hauppauge WinTV [card=10], PCI >> subsystem ID is 0070:13eb >> [ 3.539212] bttv: 0: using: Hauppauge (bt878) [card=10,autodetected] >> [ 3.541740] bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5] >> [ 3.570092] nvidia: module license 'NVIDIA' taints kernel. >> [ 3.570095] Disabling lock debugging due to kernel taint >> [ 3.574636] tveeprom 1-0050: Hauppauge model 61344, rev D221, serial# >> 3755413 >> [ 3.574640] tveeprom 1-0050: tuner model is Philips FM1216 (idx 21, >> type 5) >> [ 3.574641] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) >> [ 3.574643] tveeprom 1-0050: audio processor is MSP3415 (idx 6) >> [ 3.574644] tveeprom 1-0050: has radio >> [ 3.574646] bttv: 0: Hauppauge eeprom indicates model#61344 >> [ 3.574647] bttv: 0: tuner type=5 >> [ 3.579460] vgaarb: device changed decodes: >> PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem >> [ 2.790332] ACPI: Invalid Power Resource to register! >> [ 3.579550] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.26 >> Wed Feb 27 13:04:31 PST 2013 >> >> [ 3.581267] alsactl (1392) used greatest stack depth: 5064 bytes left >> [ 3.587405] msp3400 1-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) >> [ 3.587407] msp3400 1-0040: msp3400 supports nicam, mode is autodetect >> [ 3.594664] tuner 1-0061: Tuner -1 found with type(s) Radio TV. >> [ 3.594972] tuner-simple 1-0061: creating new instance >> [ 3.594974] tuner-simple 1-0061: type set to 5 (Philips PAL_BG >> (FI1216 and compatibles)) >> [ 3.595734] bttv: 0: registered device video0 >> [ 3.595756] bttv: 0: registered device vbi0 >> [ 3.595790] bttv: 0: registered device radio0 >> [ 3.597514] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to >> 100ms) >> [ 3.619339] bttv: PLL set ok >> >> I'm also attaching my kernel config (self compiled using gentoo). As >> this is my first message, I don't know whether I have all the info you >> need. If not, just let me know >> >> Regards >> Benjamin >> -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
