Hi Paul On Mon, 11 Mar 2013, Paul Bolle wrote: > Release v2.6.30 removed the MT9M001_PCA9536_SWITCH and > MT9V022_PCA9536_SWITCH Kconfig symbols, in commits > 36034dc325ecab63c8cfb992fbf9a1a8e94738a2 ("V4L/DVB (11032): mt9m001: > allow setting of bus width from board code") and > e958e27adeade7fa085dd396a8a0dfaef7e338c1 ("V4L/DVB (11033): mt9v022: > allow setting of bus width from board code"). > > These two commits removed all gpio related code from these two drivers. > But they skipped removing their two selects of GPIO_PCA953X. Remove > these now as they are outdated. Their dependencies can never evaluate to > true anyhow. Thanks, this is definitely a left-over. Queued for 3.10. Thanks Guennadi > > Signed-off-by: Paul Bolle <pebolle@xxxxxxxxxx> > --- > Tested by grepping the tree. > > drivers/media/i2c/soc_camera/Kconfig | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/drivers/media/i2c/soc_camera/Kconfig b/drivers/media/i2c/soc_camera/Kconfig > index 6dff2b7..23d352f 100644 > --- a/drivers/media/i2c/soc_camera/Kconfig > +++ b/drivers/media/i2c/soc_camera/Kconfig > @@ -9,7 +9,6 @@ config SOC_CAMERA_IMX074 > config SOC_CAMERA_MT9M001 > tristate "mt9m001 support" > depends on SOC_CAMERA && I2C > - select GPIO_PCA953X if MT9M001_PCA9536_SWITCH > help > This driver supports MT9M001 cameras from Micron, monochrome > and colour models. > @@ -36,7 +35,6 @@ config SOC_CAMERA_MT9T112 > config SOC_CAMERA_MT9V022 > tristate "mt9v022 and mt9v024 support" > depends on SOC_CAMERA && I2C > - select GPIO_PCA953X if MT9V022_PCA9536_SWITCH > help > This driver supports MT9V022 cameras from Micron > > -- > 1.7.11.7 > --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html