Re: [REVIEW PATCH V4 08/12] [media] marvell-ccic: rename B_DMA* to avoid CamelCase warning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 7 Feb 2013, Albert Wang wrote:

> This patch renames the B_vmalloc/B_DMA_contig/B_DMA_sg to
> B_VMALLOC/B_DMA_CONTIG/B_DMA_SG variables to avoid CamelCase warning
> reported by the checkpatch.pl script.
> 
> Signed-off-by: Albert Wang <twang13@xxxxxxxxxxx>
> Signed-off-by: Libin Yang <lbyang@xxxxxxxxxxx>

Acked-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>

Thanks
Guennadi

> ---
>  drivers/media/platform/marvell-ccic/cafe-driver.c |    2 +-
>  drivers/media/platform/marvell-ccic/mcam-core.c   |   38 ++++++++++-----------
>  drivers/media/platform/marvell-ccic/mcam-core.h   |   12 +++----
>  drivers/media/platform/marvell-ccic/mmp-driver.c  |    2 +-
>  4 files changed, 27 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c
> index d030f9b..f85f119 100755
> --- a/drivers/media/platform/marvell-ccic/cafe-driver.c
> +++ b/drivers/media/platform/marvell-ccic/cafe-driver.c
> @@ -486,7 +486,7 @@ static int cafe_pci_probe(struct pci_dev *pdev,
>  	 * We *might* be able to run DMA_contig, especially on a system
>  	 * with CMA in it.
>  	 */
> -	mcam->buffer_mode = B_vmalloc;
> +	mcam->buffer_mode = B_VMALLOC;
>  	/*
>  	 * Get set up on the PCI bus.
>  	 */
> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
> index 29c68f1..939c430 100755
> --- a/drivers/media/platform/marvell-ccic/mcam-core.c
> +++ b/drivers/media/platform/marvell-ccic/mcam-core.c
> @@ -554,7 +554,7 @@ static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame)
>  }
>  
>  /*
> - * Initial B_DMA_contig setup.
> + * Initial B_DMA_CONTIG setup.
>   */
>  static void mcam_ctlr_dma_contig(struct mcam_camera *cam)
>  {
> @@ -611,7 +611,7 @@ static void mcam_sg_next_buffer(struct mcam_camera *cam)
>  }
>  
>  /*
> - * Initial B_DMA_sg setup
> + * Initial B_DMA_SG setup
>   */
>  static void mcam_ctlr_dma_sg(struct mcam_camera *cam)
>  {
> @@ -1005,7 +1005,7 @@ static int mcam_read_setup(struct mcam_camera *cam)
>  	 * Configuration.  If we still don't have DMA buffers,
>  	 * make one last, desperate attempt.
>  	 */
> -	if (cam->buffer_mode == B_vmalloc && cam->nbufs == 0 &&
> +	if (cam->buffer_mode == B_VMALLOC && cam->nbufs == 0 &&
>  			mcam_alloc_dma_bufs(cam, 0))
>  		return -ENOMEM;
>  
> @@ -1051,13 +1051,13 @@ static int mcam_vb_queue_setup(struct vb2_queue *vq,
>  		void *alloc_ctxs[])
>  {
>  	struct mcam_camera *cam = vb2_get_drv_priv(vq);
> -	int minbufs = (cam->buffer_mode == B_DMA_contig) ? 3 : 2;
> +	int minbufs = (cam->buffer_mode == B_DMA_CONTIG) ? 3 : 2;
>  
>  	sizes[0] = cam->pix_format.sizeimage;
>  	*num_planes = 1; /* Someday we have to support planar formats... */
>  	if (*nbufs < minbufs)
>  		*nbufs = minbufs;
> -	if (cam->buffer_mode == B_DMA_contig)
> +	if (cam->buffer_mode == B_DMA_CONTIG)
>  		alloc_ctxs[0] = cam->vb_alloc_ctx;
>  	return 0;
>  }
> @@ -1144,7 +1144,7 @@ static int mcam_vb_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	 * destination.  So go into a wait state and hope they
>  	 * give us buffers soon.
>  	 */
> -	if (cam->buffer_mode != B_vmalloc && list_empty(&cam->buffers)) {
> +	if (cam->buffer_mode != B_VMALLOC && list_empty(&cam->buffers)) {
>  		cam->state = S_BUFWAIT;
>  		return 0;
>  	}
> @@ -1285,7 +1285,7 @@ static int mcam_setup_vb2(struct mcam_camera *cam)
>  	vq->drv_priv = cam;
>  	INIT_LIST_HEAD(&cam->buffers);
>  	switch (cam->buffer_mode) {
> -	case B_DMA_contig:
> +	case B_DMA_CONTIG:
>  #ifdef MCAM_MODE_DMA_CONTIG
>  		vq->ops = &mcam_vb2_ops;
>  		vq->mem_ops = &vb2_dma_contig_memops;
> @@ -1295,7 +1295,7 @@ static int mcam_setup_vb2(struct mcam_camera *cam)
>  		cam->frame_complete = mcam_dma_contig_done;
>  #endif
>  		break;
> -	case B_DMA_sg:
> +	case B_DMA_SG:
>  #ifdef MCAM_MODE_DMA_SG
>  		vq->ops = &mcam_vb2_sg_ops;
>  		vq->mem_ops = &vb2_dma_sg_memops;
> @@ -1304,7 +1304,7 @@ static int mcam_setup_vb2(struct mcam_camera *cam)
>  		cam->frame_complete = mcam_dma_sg_done;
>  #endif
>  		break;
> -	case B_vmalloc:
> +	case B_VMALLOC:
>  #ifdef MCAM_MODE_VMALLOC
>  		tasklet_init(&cam->s_tasklet, mcam_frame_tasklet,
>  				(unsigned long) cam);
> @@ -1324,7 +1324,7 @@ static void mcam_cleanup_vb2(struct mcam_camera *cam)
>  {
>  	vb2_queue_release(&cam->vb_queue);
>  #ifdef MCAM_MODE_DMA_CONTIG
> -	if (cam->buffer_mode == B_DMA_contig)
> +	if (cam->buffer_mode == B_DMA_CONTIG)
>  		vb2_dma_contig_cleanup_ctx(cam->vb_alloc_ctx);
>  #endif
>  }
> @@ -1536,7 +1536,7 @@ static int mcam_vidioc_s_fmt_vid_cap(struct file *filp, void *priv,
>  	/*
>  	 * Make sure we have appropriate DMA buffers.
>  	 */
> -	if (cam->buffer_mode == B_vmalloc) {
> +	if (cam->buffer_mode == B_VMALLOC) {
>  		ret = mcam_check_dma_buffers(cam);
>  		if (ret)
>  			goto out;
> @@ -1774,7 +1774,7 @@ static int mcam_v4l_release(struct file *filp)
>  		mcam_cleanup_vb2(cam);
>  		mcam_config_mipi(cam, 0);
>  		mcam_ctlr_power_down(cam);
> -		if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read)
> +		if (cam->buffer_mode == B_VMALLOC && alloc_bufs_at_read)
>  			mcam_free_dma_bufs(cam);
>  	}
>  	if (cam->bus_type == V4L2_MBUS_CSI2) {
> @@ -1902,7 +1902,7 @@ int mccic_irq(struct mcam_camera *cam, unsigned int irqs)
>  			mcam_frame_complete(cam, frame);
>  			handled = 1;
>  			clear_bit(CF_FRAME_SOF0 + frame, &cam->flags);
> -			if (cam->buffer_mode == B_DMA_sg)
> +			if (cam->buffer_mode == B_DMA_SG)
>  				break;
>  		}
>  	/*
> @@ -1919,7 +1919,7 @@ int mccic_irq(struct mcam_camera *cam, unsigned int irqs)
>  
>  	if (handled == IRQ_HANDLED) {
>  		set_bit(CF_DMA_ACTIVE, &cam->flags);
> -		if (cam->buffer_mode == B_DMA_sg)
> +		if (cam->buffer_mode == B_DMA_SG)
>  			mcam_ctlr_stop(cam);
>  	}
>  	return handled;
> @@ -1953,11 +1953,11 @@ int mccic_register(struct mcam_camera *cam)
>  	 */
>  	if (buffer_mode >= 0)
>  		cam->buffer_mode = buffer_mode;
> -	if (cam->buffer_mode == B_DMA_sg &&
> +	if (cam->buffer_mode == B_DMA_SG &&
>  			cam->chip_id == V4L2_IDENT_CAFE) {
>  		printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, "
>  			"attempting vmalloc mode instead\n");
> -		cam->buffer_mode = B_vmalloc;
> +		cam->buffer_mode = B_VMALLOC;
>  	}
>  	if (!mcam_buffer_mode_supported(cam->buffer_mode)) {
>  		printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n",
> @@ -2010,7 +2010,7 @@ int mccic_register(struct mcam_camera *cam)
>  	/*
>  	 * If so requested, try to get our DMA buffers now.
>  	 */
> -	if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) {
> +	if (cam->buffer_mode == B_VMALLOC && !alloc_bufs_at_read) {
>  		if (mcam_alloc_dma_bufs(cam, 1))
>  			cam_warn(cam, "Unable to alloc DMA buffers at load"
>  					" will try again later.");
> @@ -2038,7 +2038,7 @@ void mccic_shutdown(struct mcam_camera *cam)
>  		mcam_ctlr_power_down(cam);
>  	}
>  	vb2_queue_release(&cam->vb_queue);
> -	if (cam->buffer_mode == B_vmalloc)
> +	if (cam->buffer_mode == B_VMALLOC)
>  		mcam_free_dma_bufs(cam);
>  	video_unregister_device(&cam->vdev);
>  	v4l2_device_unregister(&cam->v4l2_dev);
> @@ -2081,7 +2081,7 @@ int mccic_resume(struct mcam_camera *cam)
>  		 * If there was a buffer in the DMA engine at suspend
>  		 * time, put it back on the queue or we'll forget about it.
>  		 */
> -		if (cam->buffer_mode == B_DMA_sg && cam->vb_bufs[0])
> +		if (cam->buffer_mode == B_DMA_SG && cam->vb_bufs[0])
>  			list_add(&cam->vb_bufs[0]->queue, &cam->buffers);
>  		ret = mcam_read_setup(cam);
>  	}
> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
> index 692727d..263767e 100755
> --- a/drivers/media/platform/marvell-ccic/mcam-core.h
> +++ b/drivers/media/platform/marvell-ccic/mcam-core.h
> @@ -47,9 +47,9 @@ enum mcam_state {
>   * let the platform pick.
>   */
>  enum mcam_buffer_mode {
> -	B_vmalloc = 0,
> -	B_DMA_contig = 1,
> -	B_DMA_sg = 2
> +	B_VMALLOC = 0,
> +	B_DMA_CONTIG = 1,
> +	B_DMA_SG = 2
>  };
>  
>  /*
> @@ -59,13 +59,13 @@ static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode)
>  {
>  	switch (mode) {
>  #ifdef MCAM_MODE_VMALLOC
> -	case B_vmalloc:
> +	case B_VMALLOC:
>  #endif
>  #ifdef MCAM_MODE_DMA_CONTIG
> -	case B_DMA_contig:
> +	case B_DMA_CONTIG:
>  #endif
>  #ifdef MCAM_MODE_DMA_SG
> -	case B_DMA_sg:
> +	case B_DMA_SG:
>  #endif
>  		return 1;
>  	default:
> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
> index d355840..89dd078 100755
> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c
> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
> @@ -365,7 +365,7 @@ static int mmpcam_probe(struct platform_device *pdev)
>  	mcam->mipi_enabled = 0;
>  	mcam->lane = pdata->lane;
>  	mcam->chip_id = V4L2_IDENT_ARMADA610;
> -	mcam->buffer_mode = B_DMA_sg;
> +	mcam->buffer_mode = B_DMA_SG;
>  	spin_lock_init(&mcam->dev_lock);
>  	/*
>  	 * Get our I/O memory.
> -- 
> 1.7.9.5
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux