Re: [PATCH v17 2/7] video: add display_timing and videomode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

On Wed, Feb 27, 2013 at 06:13:49PM +0200, Tomi Valkeinen wrote:
> On 2013-02-27 18:05, Steffen Trumtrar wrote:
> > Ah, sorry. Forgot to answer this.
> > 
> > On Wed, Feb 27, 2013 at 05:45:31PM +0200, Tomi Valkeinen wrote:
> >> Ping.
> >>
> >> On 2013-02-18 16:09, Tomi Valkeinen wrote:
> >>> Hi Steffen,
> >>>
> >>> On 2013-01-25 11:01, Steffen Trumtrar wrote:
> >>>
> >>>> +/* VESA display monitor timing parameters */
> >>>> +#define VESA_DMT_HSYNC_LOW		BIT(0)
> >>>> +#define VESA_DMT_HSYNC_HIGH		BIT(1)
> >>>> +#define VESA_DMT_VSYNC_LOW		BIT(2)
> >>>> +#define VESA_DMT_VSYNC_HIGH		BIT(3)
> >>>> +
> >>>> +/* display specific flags */
> >>>> +#define DISPLAY_FLAGS_DE_LOW		BIT(0)	/* data enable flag */
> >>>> +#define DISPLAY_FLAGS_DE_HIGH		BIT(1)
> >>>> +#define DISPLAY_FLAGS_PIXDATA_POSEDGE	BIT(2)	/* drive data on pos. edge */
> >>>> +#define DISPLAY_FLAGS_PIXDATA_NEGEDGE	BIT(3)	/* drive data on neg. edge */
> >>>> +#define DISPLAY_FLAGS_INTERLACED	BIT(4)
> >>>> +#define DISPLAY_FLAGS_DOUBLESCAN	BIT(5)
> >>>
> >>> <snip>
> >>>
> >>>> +	unsigned int dmt_flags;	/* VESA DMT flags */
> >>>> +	unsigned int data_flags; /* video data flags */
> >>>
> >>> Why did you go for this approach? To be able to represent
> >>> true/false/not-specified?
> >>>
> > 
> > We decided somewhere between v3 and v8 (I think), that those flags can be
> > high/low/ignored.
> 
> Okay. Why aren't they enums, though? That always makes more clear which
> defines are to be used with which fields.
> 

Hm...

> >>> Would it be simpler to just have "flags" field? What does it give us to
> >>> have those two separately?
> >>>
> > 
> > I decided to split them, so it is clear that some flags are VESA defined and
> > the others are "invented" for the display-timings framework and may be
> > extended.
> 
> Hmm... Okay. Is it relevant that they are VESA defined? It just feels to
> complicate handling the flags =).
> 
> >>> Should the above say raising edge/falling edge instead of positive
> >>> edge/negative edge?
> >>>
> > 
> > Hm, I used posedge/negedge because it is shorter (and because of my Verilog past
> > pretty natural to me :-) ). I don't know what others are thinking though.
> 
> I guess it's quite clear, but it's still different terms than used
> elsewhere, e.g. documentation for videomodes.
> 
> Another thing I noticed while using the new videomode, display_timings.h
> has a few names that are quite short and generic. Like "TE_MIN", which
> is now a global define. And "timing_entry". Either name could be well
> used internally in some .c file, and could easily clash.
> 

Yes. You are correct.
Everyone using this is welcome to send patches now :-)

Regards,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux