There is only a single place where the dprintk2 macro is used, so get rid of it.
Signed-off-by: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
---
drivers/media/usb/em28xx/em28xx-i2c.c | 17 ++++++-----------
1 Datei geändert, 6 Zeilen hinzugefügt(+), 11 Zeilen entfernt(-)
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index 8819b54..f970c29 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -41,14 +41,6 @@ static unsigned int i2c_debug;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
-#define dprintk2(lvl, fmt, args...) \
-do { \
- if (i2c_debug >= lvl) { \
- printk(KERN_DEBUG "%s at %s: " fmt, \
- dev->name, __func__ , ##args); \
- } \
-} while (0)
-
/*
* em2800_i2c_send_bytes()
* send up to 4 bytes to the em2800 i2c device
@@ -295,9 +287,12 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
return 0;
for (i = 0; i < num; i++) {
addr = msgs[i].addr << 1;
- dprintk2(2, "%s %s addr=%x len=%d:",
- (msgs[i].flags & I2C_M_RD) ? "read" : "write",
- i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
+ if (i2c_debug >= 2)
+ printk(KERN_DEBUG "%s at %s: %s %s addr=%02x len=%d:",
+ dev->name, __func__ ,
+ (msgs[i].flags & I2C_M_RD) ? "read" : "write",
+ i == num - 1 ? "stop" : "nonstop",
+ addr, msgs[i].len );
if (!msgs[i].len) { /* no len: check only for device presence */
if (dev->board.is_em2800)
rc = em2800_i2c_check_for_device(dev, addr);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
