Hi, I'm trying to get a TerraTec H7 working. I started with Xubuntu 12.04, using kernel 3.2.24: tingo@kg-f4:~/work/w_scan-20121111$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise tingo@kg-f4:~/work/w_scan-20121111$ uname -a Linux kg-f4 3.2.24 #2 SMP Wed Sep 5 01:14:55 CEST 2012 x86_64 x86_64 x86_64 GNU/Linux I have this H7 variant: tingo@kg-f4:~/work/w_scan-20121111$ lsusb -s 2:2 Bus 002 Device 002: ID 0ccd:10a3 TerraTec Electronic GmbH I added the media_build tree, by following these instructions: http://git.linuxtv.org/media_build.git relevant parts of dmesg output: [ 9.008181] WARNING: You are using an experimental version of the media stack. [ 9.008186] As the driver is backported to an older kernel, it doesn't offer [ 9.008188] enough quality for its usage in production. [ 9.008190] Use it with care. [ 9.008191] Latest git patches (needed if you report a bug to linux-media@xxxxxxxxxxxxxxx): [ 9.008193] a32f7d1ad3744914273c6907204c2ab3b5d496a0 Merge branch 'v4l_for_linus' into staging/for_v3.9 [ 9.008195] 6b9e50c463efc5c361496ae6a895cc966ff8025b [media] stv090x: On STV0903 do not set registers of the second path [ 9.008198] f67102c49a123b32a4469b28407feb52b37144f5 [media] mb86a20s: remove global BER/PER counters if per-layer counters vanish [ 9.013452] usbcore: registered new interface driver dvb_usb_az6007 [ 9.014108] usb 2-1: dvb_usb_v2: found a 'Terratec H7' in cold state [ 9.746658] usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-terratec-h7-az6007.fw' [ 9.770522] usb 2-1: dvb_usb_v2: found a 'Terratec H7' in warm state [ 11.008581] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 11.008625] DVB: registering new adapter (Terratec H7) [ 11.011489] usb 2-1: dvb_usb_v2: MAC address: c2:cd:0c:a3:10:00 [ 11.025188] drxk: frontend initialized. [ 11.036565] usb 2-1: DVB: registering adapter 0 frontend 0 (DRXK)... [ 11.047302] mt2063_attach: Attaching MT2063 [ 11.072035] Registered IR keymap rc-nec-terratec-cinergy-xs [ 11.072230] input: Terratec H7 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc0/input13 [ 11.072346] rc0: Terratec H7 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/rc/rc0 [ 11.072354] usb 2-1: dvb_usb_v2: schedule remote query interval to 400 msecs [ 11.072361] usb 2-1: dvb_usb_v2: 'Terratec H7' successfully initialized and connected [ 11.088076] drxk: status = 0x439130d9 [ 11.088085] drxk: detected a drx-3913k, spin A2, xtal 27.000 MHz I get this in /dev: tingo@kg-f4:~/work/w_scan-20121111$ ls -l /dev/dvb/adapter0 total 0 crw-rw----+ 1 root video 212, 3 Jan 31 21:06 ca0 crw-rw----+ 1 root video 212, 0 Jan 31 21:06 demux0 crw-rw----+ 1 root video 212, 1 Jan 31 21:06 dvr0 crw-rw----+ 1 root video 212, 4 Jan 31 21:06 frontend0 crw-rw----+ 1 root video 212, 2 Jan 31 21:06 net0 But when I scan with w_scan, it doesn't find any channels: tingo@kg-f4:~/work/w_scan-20121111$ ./w_scan -fc -c NO -C ISO-8859-1 w_scan version 20121111 (compiled for DVB API 5.4) using settings for NORWAY DVB cable DVB-C scan type CABLE, channellist 7 output format vdr-1.6 output charset 'ISO-8859-1' Info: using DVB adapter auto detection. /dev/dvb/adapter0/frontend0 -> CABLE "DRXK DVB-C DVB-T": good :-) Using CABLE frontend (adapter /dev/dvb/adapter0/frontend0) -_-_-_-_ Getting frontend capabilities-_-_-_-_ Using DVB API 5.a frontend 'DRXK DVB-C DVB-T' supports INVERSION_AUTO QAM_AUTO not supported, trying QAM_64 QAM_256. FEC_AUTO FREQ (47.00MHz ... 865.00MHz) SRATE (0.870MSym/s ... 11.700MSym/s) -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ searching QAM64... 73000: sr6900 (time: 00:02) sr6875 (time: 00:05) (lots of output snipped) 842000: sr6900 (time: 13:07) sr6875 (time: 13:10) 850000: sr6900 (time: 13:13) sr6875 (time: 13:15) 858000: sr6900 (time: 13:18) sr6875 (time: 13:20) ERROR: Sorry - i couldn't get any working frequency/transponder Nothing to scan!! And yes - the H7 is connected to a cable with a DVB-C signal on it (using a different DVBC-adapter, w_scan finds lamost 200 channels). What more can I do to get this H7 working? -- Regards, Torfinn Ingolfsen -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
