Hi Prabhakar, Thank you for the patch. Sylwester and Guennadi have posted a DT bindings proposal for V4L2 devices. Shouldn't you base this patch on those bindings ? On Thursday 24 January 2013 14:42:20 Prabhakar Lad wrote: > From: Lad, Prabhakar <prabhakar.lad@xxxxxx> > > add OF support for the tvp514x driver. > > Signed-off-by: Lad, Prabhakar <prabhakar.lad@xxxxxx> > Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx> > Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> > Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx> > --- > This patch is on top of following patches: > 1: https://patchwork.kernel.org/patch/1930941/ > 2: http://patchwork.linuxtv.org/patch/16193/ > 3: https://patchwork.kernel.org/patch/1944901/ > > .../devicetree/bindings/media/i2c/tvp514x.txt | 30 ++++++++++ > drivers/media/i2c/tvp514x.c | 60 +++++++++++++++-- > 2 files changed, 85 insertions(+), 5 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt > > diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt new file mode > 100644 > index 0000000..3cce323 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > @@ -0,0 +1,30 @@ > +* Texas Instruments TVP514x video decoder > + > +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip > +digital video decoder that digitizes and decodes all popular baseband > analog +video formats into digital video component. The tvp514x decoder > supports analog- +to-digital (A/D) conversion of component RGB and YPbPr > signals as well as A/D +conversion and decoding of NTSC, PAL and SECAM > composite and S-video into +component YCbCr. > + > +Required Properties : > +- compatible: Must be "ti,tvp514x-decoder" > +- hsync-active: HSYNC Polarity configuration for current interface. > +- vsync-active: VSYNC Polarity configuration for current interface. > +- data-active: Clock polarity of the current interface. > + > +Example: > + > +i2c0@1c22000 { > + ... > + ... > + > + tvp514x@5c { > + compatible = "ti,tvp514x-decoder"; > + reg = <0x5c>; > + hsync-active = <1>; /* Active low (Defaults to 0) */ > + hsync-active = <1>; /* Active low (Defaults to 0) */ > + data-active = <0>; /* Active low (Defaults to 0) */ > + }; > + ... > +}; > diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c > index a4f0a70..0e2b15c 100644 > --- a/drivers/media/i2c/tvp514x.c > +++ b/drivers/media/i2c/tvp514x.c > @@ -12,6 +12,7 @@ > * Hardik Shah <hardik.shah@xxxxxx> > * Manjunath Hadli <mrh@xxxxxx> > * Karicheri Muralidharan <m-karicheri2@xxxxxx> > + * Prabhakar Lad <prabhakar.lad@xxxxxx> > * > * This package is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License version 2 as > @@ -930,6 +931,50 @@ static struct tvp514x_decoder tvp514x_dev = { > > }; > > +#if defined(CONFIG_OF) > +static const struct of_device_id tvp514x_of_match[] = { > + {.compatible = "ti,tvp514x-decoder", }, > + {}, > +} > +MODULE_DEVICE_TABLE(of, tvp514x_of_match); > + > +static struct tvp514x_platform_data > + *tvp514x_get_pdata(struct i2c_client *client) > +{ > + if (!client->dev.platform_data && client->dev.of_node) { > + struct tvp514x_platform_data *pdata; > + u32 prop; > + > + pdata = devm_kzalloc(&client->dev, > + sizeof(struct tvp514x_platform_data), > + GFP_KERNEL); > + client->dev.platform_data = pdata; > + if (!pdata) > + return NULL; > + if (!of_property_read_u32(client->dev.of_node, > + "data-active", &prop)) > + pdata->clk_polarity = prop; > + if (!of_property_read_u32(client->dev.of_node, > + "hsync-active", &prop)) > + pdata->hs_polarity = prop; > + if (!of_property_read_u32(client->dev.of_node, > + "vsync-active", &prop)) > + pdata->vs_polarity = prop; > + > + } > + > + return client->dev.platform_data; > +} > +#else > +#define tvp514x_of_match NULL > + > +static struct tvp514x_platform_data > + *tvp514x_get_pdata(struct i2c_client *client) > +{ > + return client->dev.platform_data; > +} > +#endif > + > /** > * tvp514x_probe() - decoder driver i2c probe handler > * @client: i2c driver client device structure > @@ -941,6 +986,7 @@ static struct tvp514x_decoder tvp514x_dev = { > static int > tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) > { > + struct tvp514x_platform_data *pdata; > struct tvp514x_decoder *decoder; > struct v4l2_subdev *sd; > int ret; > @@ -949,22 +995,25 @@ tvp514x_probe(struct i2c_client *client, const struct > i2c_device_id *id) if (!i2c_check_functionality(client->adapter, > I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; > > + pdata = tvp514x_get_pdata(client); > + if (!pdata) { > + v4l2_err(client, "No platform data!!\n"); > + return -EPROBE_DEFER; > + } > + > decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL); > if (!decoder) > return -ENOMEM; > > /* Initialize the tvp514x_decoder with default configuration */ > *decoder = tvp514x_dev; > - if (!client->dev.platform_data) { > - v4l2_err(client, "No platform data!!\n"); > - return -EPROBE_DEFER; > - } > + > /* Copy default register configuration */ > memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, > sizeof(tvp514x_reg_list_default)); > > /* Copy board specific information here */ > - decoder->pdata = client->dev.platform_data; > + decoder->pdata = pdata; > > /** > * Fetch platform specific data, and configure the > @@ -1096,6 +1145,7 @@ MODULE_DEVICE_TABLE(i2c, tvp514x_id); > > static struct i2c_driver tvp514x_driver = { > .driver = { > + .of_match_table = tvp514x_of_match, > .owner = THIS_MODULE, > .name = TVP514X_MODULE_NAME, > }, -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html