While we are at it ;) : [ 15.280772] bttv: Bt8xx card found (0) [ 15.281349] bttv: 0: Bt878 (rev 17) at 0000:01:08.0, irq: 18, latency: 32, mmio: 0xfdfff000 [ 15.281386] bttv: 0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 15.281391] bttv: 0: using: Hauppauge (bt878) [card=10,insmod option] [ 15.283964] bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 15.316043] tveeprom 4-0050: Hauppauge model 37284, rev B421, serial# 5111944 [ 15.316049] tveeprom 4-0050: tuner model is Philips FM1216 (idx 21, type 5) [ 15.316054] tveeprom 4-0050: TV standards PAL(B/G) (eeprom 0x04) [ 15.316059] tveeprom 4-0050: audio processor is MSP3410D (idx 5) [ 15.316063] tveeprom 4-0050: has radio [ 15.316066] bttv: 0: Hauppauge eeprom indicates model#37284 [ 15.316071] bttv: 0: tuner type=5 [ 16.178816] bttv: 0: registered device video0 [ 16.179071] bttv: 0: registered device vbi0 [ 16.180587] bttv: 0: registered device radio0 When I load module ir-kbd-i2c manually: Registered IR keymap rc-hauppauge input: i2c IR (Hauppauge) as /devices/virtual/rc/rc0/input6 rc0: i2c IR (Hauppauge) as /devices/virtual/rc/rc0 ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-4/4-0018/ir0 [bt878 #0 [sw]] Remote control works fine then. Regards, rank -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
