The MT9M032 PLL was assumed to be identical to the MT9P031 PLL but
differs significantly. Update the registers definitions and PLL limits
according to the datasheet.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/mt9m032.c | 24 +++++++++++++-----------
1 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/media/i2c/mt9m032.c b/drivers/media/i2c/mt9m032.c
index f80c1d7e..30d755a 100644
--- a/drivers/media/i2c/mt9m032.c
+++ b/drivers/media/i2c/mt9m032.c
@@ -87,7 +87,7 @@
#define MT9M032_RESTART 0x0b
#define MT9M032_RESET 0x0d
#define MT9M032_PLL_CONFIG1 0x11
-#define MT9M032_PLL_CONFIG1_OUTDIV_MASK 0x3f
+#define MT9M032_PLL_CONFIG1_PREDIV_MASK 0x3f
#define MT9M032_PLL_CONFIG1_MUL_SHIFT 8
#define MT9M032_READ_MODE1 0x1e
#define MT9M032_READ_MODE2 0x20
@@ -106,6 +106,8 @@
#define MT9M032_GAIN_AMUL_SHIFT 6
#define MT9M032_GAIN_ANALOG_MASK 0x3f
#define MT9M032_FORMATTER1 0x9e
+#define MT9M032_FORMATTER1_PLL_P1_6 (1 << 8)
+#define MT9M032_FORMATTER1_PARALLEL (1 << 12)
#define MT9M032_FORMATTER2 0x9f
#define MT9M032_FORMATTER2_DOUT_EN 0x1000
#define MT9M032_FORMATTER2_PIXCLK_EN 0x2000
@@ -121,8 +123,6 @@
#define MT9P031_PLL_CONTROL_PWROFF 0x0050
#define MT9P031_PLL_CONTROL_PWRON 0x0051
#define MT9P031_PLL_CONTROL_USEPLL 0x0052
-#define MT9P031_PLL_CONFIG2 0x11
-#define MT9P031_PLL_CONFIG2_P1_DIV_MASK 0x1f
struct mt9m032 {
struct v4l2_subdev subdev;
@@ -255,13 +255,14 @@ static int mt9m032_setup_pll(struct mt9m032 *sensor)
.n_max = 64,
.m_min = 16,
.m_max = 255,
- .p1_min = 1,
- .p1_max = 128,
+ .p1_min = 6,
+ .p1_max = 7,
};
struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
struct mt9m032_platform_data *pdata = sensor->pdata;
struct aptina_pll pll;
+ u16 reg_val;
int ret;
pll.ext_clock = pdata->ext_clock;
@@ -274,18 +275,19 @@ static int mt9m032_setup_pll(struct mt9m032 *sensor)
sensor->pix_clock = pdata->pix_clock;
ret = mt9m032_write(client, MT9M032_PLL_CONFIG1,
- (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT)
- | (pll.p1 - 1));
- if (!ret)
- ret = mt9m032_write(client, MT9P031_PLL_CONFIG2, pll.n - 1);
+ (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT) |
+ ((pll.n - 1) & MT9M032_PLL_CONFIG1_PREDIV_MASK));
if (!ret)
ret = mt9m032_write(client, MT9P031_PLL_CONTROL,
MT9P031_PLL_CONTROL_PWRON |
MT9P031_PLL_CONTROL_USEPLL);
if (!ret) /* more reserved, Continuous, Master Mode */
ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8006);
- if (!ret) /* Set 14-bit mode, select 7 divider */
- ret = mt9m032_write(client, MT9M032_FORMATTER1, 0x111e);
+ if (!ret) {
+ reg_val = (pll.p1 == 6 ? MT9M032_FORMATTER1_PLL_P1_6 : 0)
+ | MT9M032_FORMATTER1_PARALLEL | 0x001e; /* 14-bit */
+ ret = mt9m032_write(client, MT9M032_FORMATTER1, reg_val);
+ }
return ret;
}
--
1.7.8.6
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
